summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
AgeCommit message (Collapse)Author
2014-04-15ARM: i.MX6: ipu_di_sel clocks can set parent ratesPhilipp Zabel
To obtain exact pixel clocks, allow the DI clock selectors to influence the PLLs that they are derived from. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-15ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_selSascha Hauer
Route the video PLL to the display interface clocks via the di_pre_sel and di_sel muxes by default. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: imx6q-clk: parent lvds_gate from lvds_selLucas Stach
Allows fror proper refcounting of the parent clocks when enabling the clock output on CLK1/2 pads. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-04Merge tag 'fbdev-main-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: "Various fbdev fixes and improvements, but nothing big" * tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits) fbdev: Make the switch from generic to native driver less alarming Video: atmel: avoid the id of fix screen info is overwritten video: imxfb: Add DT default contrast control register property. video: atmel_lcdfb: ensure the hardware is initialized with the correct mode fbdev: vesafb: add dev->remove() callback fbdev: efifb: add dev->remove() callback video: pxa3xx-gcu: switch to devres functions video: pxa3xx-gcu: provide an empty .open call video: pxa3xx-gcu: pass around struct device * video: pxa3xx-gcu: rename some symbols sisfb: fix 1280x720 resolution support video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove fbdev: FB_OPENCORES should depend on HAS_DMA OMAPDSS: convert pixel clock to common videomode style OMAPDSS: Remove unused get_context_loss_count support OMAPDSS: use DISPC register to detect context loss video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro video: imxfb: Convert to SIMPLE_DEV_PM_OPS video: imxfb: Resolve mismatch between backlight/contrast ...
2014-04-01Merge tag 'tty-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
2014-03-12Merge branch 'irq/for-gpio' into irq/coreThomas Gleixner
Merge the request/release callbacks which are in a separate branch for consumption by the gpio folks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-05ARM: imx6: drop .text.head section annotation from headsmp.SShawn Guo
The function v7_secondary_startup() works just fine in .text section, so there is no need to have .text.head section annotation at all. Drop it. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6Shawn Guo
Even when CONFIG_SUSPEND is enabled, it makes no sense to build suspend-imx6.o if none of i.MX6 support is built in. Let's build suspend-imx6.o only when both CONFIG_SUSPEND and CONFIG_SOC_IMX6 are enabled. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: rename pm-imx6q.c to pm-imx6.cShawn Guo
The pm-imx6q.c works for all i.MX6 SoCs, so let's rename it to pm-imx6.c and have the build controlled by option CONFIG_SOC_IMX6. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuffShawn Guo
The i.MX6 SoCs have something in common, so let's introduce CONFIG_SOC_IMX6 for those stuff. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPENDShawn Guo
When CONFIG_SUSPEND is not enabled, we should reasonably skip the call to imx6q_suspend_init(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: call suspend_set_ops() from suspend routineShawn Guo
Rename function imx6q_ocram_suspend_init() to imx6q_suspend_init() and call suspend_set_ops() from there. Now we get a centralized function for suspend initialization. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: build headsmp.o only on CONFIG_SMPShawn Guo
With v7_cpu_resume() being moved out of headsmp.S, all the remaining code in the file is only needed by CONFIG_SMP build. So we can control the build of headsmp.o with only obj-$(CONFIG_SMP) now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6: move v7_cpu_resume() into suspend-imx6.SShawn Guo
The suspend-imx6.S is introduced recently for suspend low-level assembly code. Since function v7_cpu_resume() is only used by suspend support, it makes sense to move the function into suspend-imx6.S, and control the build of the file with CONFIG_SUSPEND option. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priorityPhilipp Zabel
This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity. Some boards like the SabreLite and SabreSD seem to set this in the DCD already, but the documented register reset values do not contain the necessary settings. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53Fabio Estevam
SOC_IMX53 is a device-tree only platform, so we don't need IMX_HAVE_PLATFORM_IMX2_WDT at all because this symbol only provides some code to help register imx2-wdt platform devices. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC levelFabio Estevam
Booting a mx6q system built with multi_v7_defconfig leads to the following error messages on boot: [ 0.037758] imx6q_ocram_suspend_init: ocram pool unavailable! [ 0.037768] imx6_pm_common_init: failed to initialize ocram suspend -19! This happens because CONFIG_SRAM is not selected by default in multi_v7_defconfig. Fix this by selecting CONFIG_SRAM at ARCH_MXC level, so that other SoCs could use the SRAM driver as well. As SRAM automatically selects GENERIC_ALLOCATOR, just drop it from the Kconfig entry. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add speed grading check for i.mx6 socAnson Huang
The fuse map of speed_grading[1:0] defines the max speed of ARM, see below the definition: 2b'11: 1200000000Hz; 2b'10: 996000000Hz; 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. 2b'00: 792000000Hz; Need to remove all illegal setpoints according to fuse map. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: avoid calling clk APIs in idle thread which may cause scheduleAnson Huang
As clk_pllv3_wait_lock will call usleep_range, and the clk APIs mutex lock may be held when CPU entering idle, so calling clk APIs must be avoided in cpu idle thread, this is to avoid reschedule warning in cpu idle, just access register directly to achieve that. bad: scheduling from the idle thread! CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1+ #657 Backtrace: [<80012188>] (dump_backtrace) from [<8001246c>] (show_stack+0x18/0x1c) r6:808c0038 r5:00000000 r4:808e5a1c r3:00000000 [<80012454>] (show_stack) from [<8064b2ec>] (dump_stack+0x84/0x9c) [<8064b268>] (dump_stack) from [<80055ee0>] (dequeue_task_idle+0x20/0x30) r5:808bef40 r4:bf7dff40 [<80055ec0>] (dequeue_task_idle) from [<8004f028>] (dequeue_task+0x30/0x50) r4:bf7dff40 r3:80055ec0 [<8004eff8>] (dequeue_task) from [<800503c0>] (deactivate_task+0x30/0x34) r4:bf7dff40 [<80050390>] (deactivate_task) from [<8064d8e4>] (__schedule+0x2c8/0x5c0) [<8064d61c>] (__schedule) from [<8064dc14>] (schedule+0x38/0x88) r10:80912964 r9:808c1e50 r8:808c0038 r7:808cbf30 r6:80e128ec r5:60000093 r4:80912968 [<8064dbdc>] (schedule) from [<8064dfec>] (schedule_preempt_disabled+0x10/0x14) [<8064dfdc>] (schedule_preempt_disabled) from [<8064ebc0>] (mutex_lock_nested+0x1c0/0x3c0) [<8064ea00>] (mutex_lock_nested) from [<804ae71c>] (clk_prepare_lock+0x44/0xe4) r10:806554cc r9:bf7df1bc r8:808cf4f8 r7:808cf544 r6:bf7df1b8 r5:808c0010 r4:80e69750 [<804ae6d8>] (clk_prepare_lock) from [<804af214>] (clk_get_rate+0x14/0x64) r6:bf7df1b8 r5:00000002 r4:bf017000 r3:80922ad0 [<804af200>] (clk_get_rate) from [<80025d30>] (imx6sl_set_wait_clk+0x18/0x20) r5:00000002 r4:00000001 [<80025d18>] (imx6sl_set_wait_clk) from [<80023454>] (imx6sl_enter_wait+0x20/0x48) [<80023434>] (imx6sl_enter_wait) from [<80477c24>] (cpuidle_enter_state+0x44/0xfc) r4:3c386e48 r3:80023434 [<80477be0>] (cpuidle_enter_state) from [<80477dd8>] (cpuidle_idle_call+0xfc/0x160) r8:808cf4f8 r7:00000001 r6:80e69534 r5:00000000 r4:bf7df1b8 [<80477cdc>] (cpuidle_idle_call) from [<8000f61c>] (arch_cpu_idle+0x10/0x50) r9:808c0000 r8:00000000 r7:80921a89 r6:808c8938 r5:808c899c r4:808c0000 [<8000f60c>] (arch_cpu_idle) from [<8006fa94>] (cpu_startup_entry+0x108/0x160) [<8006f98c>] (cpu_startup_entry) from [<806452ac>] (rest_init+0xb4/0xdc) r7:808afae0 [<806451f8>] (rest_init) from [<8086fb58>] (start_kernel+0x328/0x38c) r6:ffffffff r5:808c8880 r4:808c8a30 [<8086f830>] (start_kernel) from [<80008074>] (0x80008074) Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6q: support ptp and rmii clock from padShawn Guo
On imx6qdl, the ENET RMII and PTP clock can come from either internal ANATOP/CCM or external clock source through pad GPIO_16. But in case of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared. The patch adds the support for systems that use an external clock source and distinguishes above two cases by checking if the PTP clock specified in device tree is the one coming from the internal ANATOP/CCM. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6q: remove unneeded clk lookupsShawn Guo
Since commit (a94f8ec ARM: imx6q: remove board specific CLKO setup), a number of clk lookups in imx6q clock driver is no longer needed. Let's remove them. The cpu0 lookup is also removed since we are now running imx6 cpufreq driver and looking up clocks from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: enable delaytimer on the imx timerSebastian Andrzej Siewior
The imx can support timer-based delays, so implement this. Skips past jiffy calibration. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add always-on clock array for i.mx6sl to maintain correct usecountAnson Huang
IPG, ARM and MMDC's clock should be enabled during kernel boot up, so we need to maintain their usecount, otherwise, they may be disabled unexpectedly if their children's clock are turned off, and caused their parent PLLs also get disabled, which is incorrect. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add suspend in ocram support for i.mx6slAnson Huang
i.MX6SL's suspend in ocram function is derived from i.MX6Q, it can lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V, measured on i.MX6SL EVK board, SH5. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add suspend in ocram support for i.mx6dlAnson Huang
i.MX6DL's suspend in ocram function is derived from i.MX6Q, it can lower the DDR IO power from ~26mA@1.5V to ~15mA@1.5V, measured on i.MX6DL SabreSD board, R25. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add suspend in ocram support for i.mx6qAnson Huang
When system enter suspend, we can set the DDR IO to high-Z state to save DDR IOs' power consumption, this operation can save many power(from ~26mA@1.5V to ~15mA@1.5V, measured on i.MX6Q SabreSD board, R25) of DDR IOs. To achieve that, we need to copy the suspend code to ocram and run the low level hardware related code(set DDR IOs to high-Z state) in ocram. If there is no ocram space available, then system will still do suspend in external DDR, hence no DDR IOs will be set to high-Z. The OCRAM usage layout is as below, ocram suspend region(4K currently): ======================== high address ====================== . . . ^ ^ ^ imx6_suspend code PM_INFO structure(imx6_cpu_pm_info) ======================== low address ======================= Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM i.MX: remove PWM platform supportSascha Hauer
As the i.MX pwm driver is devicetree only, remove the platform support for this device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: clk-vf610: Suppress duplicate const sparse warningLiu Ying
There should be no duplicate const specifiers for those static constant character string arrays defined for clock mux options. Also, the arrays are only taken as the 5th argument for the imx_clk_mux() function, which is in the type of 'const char **parents'. So, let's remove the 2nd const specifier right after 'char'. This patch fixes these sparse warnings: arch/arm/mach-imx/clk-vf610.c:66:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:67:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:68:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:69:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:70:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:71:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:72:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:73:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:74:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:75:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:76:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:77:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:78:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:79:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:80:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:81:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:83:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:84:25: warning: duplicate const Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: clk-imx6sl: Suppress duplicate const sparse warningLiu Ying
There should be no duplicate const specifiers for those static constant character string arrays defined for clock mux options. Also, the arrays are only taken as the 5th argument for the imx_clk_mux() function, which is in the type of 'const char **parents'. So, let's remove the 2nd const specifier right after 'char'. This patch fixes these sparse warnings: arch/arm/mach-imx/clk-imx6sl.c:21:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:22:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:23:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:24:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:25:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:26:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:27:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:28:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:29:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:30:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:31:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:32:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:33:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:34:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:35:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:36:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:37:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:38:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:39:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:40:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:41:25: warning: duplicate const Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add select on ARCH_MXC for cpufreq supportJohn Tobias
Move ARCH_HAS_CPUFREQ, ARCH_HAS_OPP and PM_OPP on ARCH_MXC so that the user can enable the cpufreq support for iMX6Q and/or iMX6SL. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM i.MX35: build in pinctrl support.Denis Carikli
shawn.guo: While at it, we drop 'select PINCTRL' from SOC_IMX35, since it's been covered by ARCH_MXC. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add cpuidle support for i.mx6slAnson Huang
Add cpuidle support for i.MX6SL, currently only support two cpuidle levels(ARM wfi and WAIT mode), and add software workaround for WAIT mode errata as below: ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken during WAIT mode entry process could cause cache memory corruption. Software workaround: To prevent this issue from occurring, software should ensure that the ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before entering WAIT mode. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: AHB rate must be set to 132MHz on i.mx6slAnson Huang
The reset value of AHB divider is 3, so current AHB rate is 99MHz which is not correct for kernel, need to ensure AHB rate is 132MHz in clk driver, as ipg is sourcing from AHB, and it should be 66MHz by default. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: Use INT_MEM_CLK_LPM as the bit nameFabio Estevam
Bit 17 of register CCM_CGPR is called INT_MEM_CLK_LPM as per the mx6 reference manual, so use this name instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05Merge tag 'kconfig-cleanup-for-3.15' into imx/socShawn Guo
- Remove common kconfig options required by multi-platform builds out of individual platforms as they are redundant. - Make SMP, CACHE_L2X0 and GPIO config options user visible on multi-platform builds as most platforms enable these options and all platforms can run with them enabled. - Make multi-platform v6 default to more optimal v6k rather than v6 - Remove the last bit of mach-virt and convert it to just a kconfig option. Conflicts: arch/arm/mach-omap2/Kconfig
2014-03-04arm: Replace various irq_desc accessesThomas Gleixner
Use the proper functions. There is no need to fiddle with irq_desc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>C Acked-by: Tony Lindgren <tony@atomide.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arm <linux-arm-kernel@lists.infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Link: http://lkml.kernel.org/r/20140223212737.099151500@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-28serial: imx: Remove init() and exit() platform callbacksAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-19ARM: Select V6K instead of V6 by default for multi-platformRob Herring
MULTI_V6 should default to V6K as it is more optimal than V6. Any platform which is not V6K should select CPU_V6 which will enable the less optimal code paths. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Anton Vorontsov <anton@enomsg.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19ARM: select MIGHT_HAVE_CACHE_L2X0 for V6 and V7 multi-platformRob Herring
Many V6 and V7 platforms have an L2x0 cache, so make CONFIG_MIGHT_HAVE_CACHE_L2X0 visible for V6 and V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19ARM: select HAVE_SMP for V7 multi-platformRob Herring
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19ARM: centralize common multi-platform kconfig optionsRob Herring
Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-18ARM: imx6: build pm-imx6q.c independently of CONFIG_PMShawn Guo
When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM, we will get the following link error. LD init/built-in.o arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait': platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm' platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm' arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init': platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit' make[1]: *** [vmlinux] Error 1 Since pm-imx6q.c has been a collection of library functions that access CCM low-power registers used by not only suspend but also cpuidle and other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix above error. Reported-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable@vger.kernel.org Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-11video: imxfb: Use regulator API with LCD class for poweringAlexander Shiyan
This patch replaces custom lcd_power() callback with regulator API over LCD class. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-10ARM: imx6: Initialize low-power mode early againPhilipp Zabel
Since commit 9e8147bb5ec5d1dda2141da70f96b98985a306cb "ARM: imx6q: move low-power code out of clock driver" the kernel fails to boot on i.MX6Q/D if preemption is enabled (CONFIG_PREEMPT=y). The kernel just hangs before the console comes up. The above commit moved the initalization of the low-power mode setting (enabling clocked WAIT states), which was introduced in commit 83ae20981ae924c37d02a42c829155fc3851260c "ARM: imx: correct low-power mode setting", from imx6q_clks_init to imx6q_pm_init. Now it is called much later, after all cores are enabled. This patch moves the low-power mode initialization back to imx6q_clks_init again (and to imx6sl_clks_init). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-29Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull more ARM updates from Russell King: "Some further changes for this merge window: - fix bug building with gcc 4.6.4 and EABI. - fix pgtbl macro with some LPAE configurations - fix initrd override - FDT was overriding the command line, and it should be the other way around. - fix byteswap of instructions in undefined instruction handler - add basic support for SolidRun Hummingboard and Cubox-i boards" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix building with gcc 4.6.4 ARM: 7941/2: Fix incorrect FDT initrd parameter override ARM: 7947/1: Make pgtbl macro more robust ARM: 7946/1: asm: __und_usr_thumb need byteswap instructions in BE case ARM: 7930/1: Introduce atomic MMIO modify ARM: imx: initial SolidRun Cubox-i support ARM: imx: initial SolidRun HummingBoard support
2014-01-28Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "Basically this cycle is mostly cleanup for LED subsystem" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: s3c24xx: Remove hardware.h inclusion leds: replace list_for_each with list_for_each_entry leds: kirkwood: Cleanup in header files leds: pwm: Remove a warning on non-DT platforms leds: leds-pwm: fix duty time overflow. leds: leds-mc13783: Remove unneeded mc13xxx_{un}lock leds: leds-mc13783: Remove duplicate field in platform data drivers: leds: leds-tca6507: check CONFIG_GPIOLIB whether defined for 'gpio_base' leds: lp5523: Support LED MUX configuration on running a pattern leds: lp5521/5523: Fix multiple engine usage bug LEDS: tca6507 - fix up some comments. LEDS: tca6507: add device-tree support for GPIO configuration. LEDS: tca6507 - fix bugs in parsing of device-tree configuration.
2014-01-28Merge branch 'cubox-i-init' into for-linusRussell King
2014-01-27leds: leds-mc13783: Remove duplicate field in platform dataAlexander Shiyan
LED platform data are overwhelmed by excessive field "max_cur" which just replicates few bits of "led_control" field. This patch removes this field and adds a definition for the current settings in the header. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Bryan Wu <cooloney@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 22:13:50 +0000