summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mmp
AgeCommit message (Collapse)Author
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-05Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
2011-11-01Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...
2011-11-01Merge branch 'depends/rmk/memory_h' into next/fixesArnd Bergmann
Fix up all conflicts between the memory.h cleanup and bug fixes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-25ARM: mmp: register internal sram bankLeo Yan
MMP2 have the internal sram, this sram can be allocated for video, power management and secure processor. Now the sram usage is: 0xd1000000 ~ 0xd101ffff (128KB) : reserved for secure processor 0xd1020000 ~ 0xd1037fff (96KB) : for video and PM Register the internal sram's second half 96KB buffer, so that video and PM can dynamically alloc/free from it. Signed-off-by: Leo Yan <leoy@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-25ARM: mmp: register audio sram bankLeo Yan
MMP platform has sram for the audio island; Add the device structure for the audio sram, and register the audio sram device at init phase. Signed-off-by: Leo Yan <leoy@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-25ARM: mmp: add sram allocatorLeo Yan
On mmp platform, there have two sram banks: audio sram and internal sram. The audio sram is mainly for audio; the internal sram is for video, wtm and power management. So add the sram allocator using genalloc to manage them. Every sram bank will register its own platform device info, after the sram allocator create the generic pool for the sram bank, the user module can use the pool's name to get the pool handler; then it can use the handler to alloc/free memory with genalloc APIs. Signed-off-by: Leo Yan <leoy@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-25ARM: mmp: rename SHEEVAD to GPLUGDEric Miao
GuruPlugD was initially named to be SHEEVAD, and it's causing naming confusion in the mach-types database. Make it consistent by renaming to GPLUGD. Reported-and-Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-25Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits) usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push() usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB. USB: gadget: midi: memory leak in f_midi_bind_config() USB: gadget: midi: fix range check in f_midi_out_open() QE/FHCI: fixed the CONTROL bug usb: renesas_usbhs: tidyup for smatch warnings USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms EHCI: workaround for MosChip controller bug usb: gadget: file_storage: fix race on unloading USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF . USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board USB: Fix runtime wakeup on OHCI xHCI/USB: Make xHCI driver have a BOS descriptor. usb: gadget: add new usb gadget for ACM and mass storage ...
2011-10-17ARM: 7022/1: allow to detect conflicting zreladdrsSascha Hauer
Boards used to specify zreladdr in their Makefile.boot with zreladdr-y := x, so conflicting zreladdrs were silently overwritten. This patch changes this to zreladdr-y += x, so that we end up with multiple words in zreladdr in such a case. We can detect this later and complain if necessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7006/1: Migrate to asm-generic wrapper supportStephen Boyd
With d8ecc5c (kbuild: asm-generic support, 2011-04-27) we can remove a handful of asm-generic wrappers in ARM code. Since the generic version of sizes.h doesn't contain SZ_48M, we replace the 4 users of SZ_48M with the equivalent SZ_32M + SZ_16M. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-13ARM: mach-mmp: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-08ARM: pxa: use correct __iomem annotationsArnd Bergmann
This tries to clear up the confusion between integers and iomem pointers in the marvell pxa platform. MMIO addresses are supposed to be __iomem* values, in order to let the Linux type checking work correctly. This patch moves the cast to __iomem as far back as possible, to the place where the MMIO virtual address windows are defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-01ARM: 7104/1: plat-pxa: break out GPIO driver specificsLinus Walleij
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ARM: add an extra temp register to the low level debugging addruart macroNicolas Pitre
Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-11mtd: pxa3xx_nand: enable multiple chip select supportLei Wen
Current pxa3xx_nand controller has two chip select which both be workable. This patch enable this feature. Update platform driver to support this feature. Another notice should be taken that: When you want to use this feature, you should not enable the keep configuration feature, for two chip select could be attached with different nand chip. The different page size and timing requirement make the keep configuration impossible. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-08-22USB: pxa168: Add onchip USB host controller supportTanmay Upadhyay
- Add EHCI Host controller driver - Add wrapper that creates resources for host controller driver v2 - Call clk_put() after clk_disable() in probe function Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-11ARM: mmp: Change the way we use timer 0 as clockevent timer.Lennert Buytenhek
Instead of setting up a match interrupt for 'current_time + delta' on ->set_next_event(), program timer 0 to count down from 'delta - 1' and trigger an interrupt when it reaches zero. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Switch to using timer 1 as clocksource timer.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Also start timer 1 on boot.Lennert Buytenhek
Currently, arch-mmp/time.c uses timer 0 both as a clocksource timer and as a clockevent timer, the latter by setting up a comparator interrupt to match on 'current_time + delta'. This is problematic if delta is small enough, as that can lead to 'current_time + delta' already being in the past when comparator setup has finished, leading to the requested event not triggering. As there is also a silicon issue that requires stopping a timer's counter while writing to one of its match registers, we'll switch to using two separate timers -- timer 0 as clockevent timer, which we'll start and stop on every invocation of ->set_next_event(), and timer 1 as clocksource timer, which will be free-running. This first patch enables timer 1 on boot, so that we can use it as clocksource timer. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: free correct GPIOTanmay Upadhyay
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: get rid of mfp-gplugd.hTanmay Upadhyay
Move definitions from mfp-gplugd.h to mfp-pxa168.h as they aren't gplugD specific. Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-26Merge branch 'next/cross-platform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cross-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: Consolidate the clkdev header files ARM: set vga memory base at run-time ARM: convert PCI defines to variables ARM: pci: make pcibios_assign_all_busses use pci_has_flag ARM: remove unnecessary mach/hardware.h includes pci: move microblaze and powerpc pci flag functions into asm-generic powerpc: rename ppc_pci_*_flags to pci_*_flags Fix up conflicts in arch/microblaze/include/asm/pci-bridge.h
2011-07-20mmc: sdhci-pxa: move platform data to include/linux/platform_dataZhangfei Gao
As suggested by Arnd, move platform data to include/linux/platform_data in order to improve build coverage for the driver. Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: update mmp2 mmc resources in arch/armZhangfei Gao
Update MMP2 platform code to "sdhci-pxav3", following the driver rename. Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-19ARM: Consolidate the clkdev header filesKyungmin Park
Now most of ARM machines has the alsmot same __clk_get/put() macro So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config Now there are only 3 caese. 1) define the clk structure with clkdev macro => Need to move clk structure to proper header file arch/arm/mach-versatile/include/mach/clkdev.h arch/arm/mach-realview/include/mach/clkdev.h arch/arm/mach-vexpress/include/mach/clkdev.h arch/arm/mach-integrator/include/mach/clkdev.h 2) export the __clk_get/put function at clock.c arch/arm/mach-shmobile/include/mach/clkdev.h 3) demuxing the clk source arch/arm/mach-u300/include/mach/clkdev.h Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-07-12ARM: mmp/dkb: enable max7312 gpio expanderHaojian Zhuang
Support max7312 gpio expander in TTC DKB. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-12ARM: pxa168: Add board support for gplugDTanmay Upadhyay
Tested UART console, Ethernet & I2C interfaces Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-12ARM: pxa168: Add support for EthernetTanmay Upadhyay
Add wrapper that creates resources for PXA168 Ethernet driver Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-12ARM: pxa168: Add support for UART3Tanmay Upadhyay
PXA168 has 3 onchip UARTs. Added support for the third one Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-12ARM: pxa: add clk_set_rate()Haojian Zhuang
Since there're mulitple clock rates in some device controllers, enable clk_set_rate() for this usage. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: pxa168: correct nand pmu settingLei Wen
The original pair of <0x01db, 208000000> is invalid. Correct it to the valid value. The 6th bit of the NFC APMU register indicates NFC works whether at 156Mhz or 78Mhz. So 0x19b indicates NFC works at 156Mhz, and 0x1db indicates it works at 78Mhz. Signed-off-by: Lei Wen <leiwen@marvell.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: pxa910: correct nand pmu settingLei Wen
The original pair of <0x01db, 208000000> is invalid. Correct to the valid value. Signed-off-by: Lei Wen <leiwen@marvell.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-05-07Merge branch 'zImage_fixes' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-05-07ARM: zImage: remove the static qualifier from global data variablesNicolas Pitre
To be able to relocate the .bss section at run time independently from the rest of the code, we must make sure that no GOTOFF relocations are used with .bss symbols. This usually means that no global variables can be marked static unless they're also const. Let's remove the static qualifier from current offenders, or turn them into const variables when possible. Next commit will ensure the build fails if one of those is reintroduced due to otherwise enforced coding standards for the kernel. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com>
2011-04-12ARM: mmp: align NR_BUILTIN_GPIO with gpio interrupt numberHaojian Zhuang
Avoid to mismatch between NR_BUILTIN_GPIO and gpio interrupt number. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12ARM: pxa: always clear LPM bits for PXA168 MFPRHaojian Zhuang
Bit[9:7] should always be zero in PXA168. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-21ARM: pxa2xx: reorganize I2C filesSebastian Andrzej Siewior
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-15ARM: mmp: PXA910 drive strength FAST using wrong valuePhilip Rakity
Drive strength for PXA910 is a 2 bit value but because of the mapping in plat-pxa/mfp.h needs to be shifted up one bit to handle real location in mfp registers. (MMP2 and PXA910 drive strength start at bit 11 while PXA168 starts at bit 10). Values 0, 1, 2, and 3 effectively need to be 0, 2, 4, and 6 to fit into register. 8 does not work. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-15ARM: mmp: MMP2 drive strength FAST using wrong valuePhilip Rakity
Drive strength for MMP2 is a 2 bit value but because of the mapping in plat-pxa/mfp.h needs to be shifted up one bit to handle real location in mfp registers. (MMP2 and PXA910 drive strength start at bit 11 while PXA168 starts at bit 10). Values 0, 1, 2, and 3 effectively need to be 0, 2, 4, and 6 to fit into register. 8 does not work. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: John Watlington <wad@laptop.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-13ARM: mmp: irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 01:53:53 +0000