summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-msm
AgeCommit message (Collapse)Author
2011-02-28msm: Use explicit GPLv2 licensesDavid Brown
Replace a BSD-style license in Code Aurora Forum authored files with an explicit GPLv2. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-14Merge branch 'msm-core' into for-nextDavid Brown
* msm-core: msm: iommu: Enable IOMMU support for MSM8960 msm: iommu: Generalize platform data for multiple targets msm: iommu: Create a Kconfig item for the IOMMU driver
2011-02-14msm: iommu: Enable IOMMU support for MSM8960Stepan Moskovchenko
Allow IOMMU to be selected for MSM8960 now that the platform data has been generalized. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-14msm: iommu: Generalize platform data for multiple targetsStepan Moskovchenko
Make the IOMMU platform data target-independent in preparation for adding MSM8960 IOMMU support. The IOMMU configuration on MSM8x60 and MSM8960 is identical and the same platform data can be used for both. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-14msm: iommu: Create a Kconfig item for the IOMMU driverStepan Moskovchenko
Break the IOMMU driver out as a Kconfig item. Initially it was decided to always build this in for 8x60, but this driver is not strictly necessary and should be optionally selectable. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28Merge branch 'msm-core' into for-nextDavid Brown
* msm-core: msm: serial: Add MSM8960 serial support
2011-01-28msm: serial: Add MSM8960 serial supportStepan Moskovchenko
Add the device definitions and platform data to support the console serial port on MSM8960 Simulator and RUMI3 targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28Merge branch 'msm-core' into for-nextDavid Brown
* msm-core: msm: Clean up useless ifdefs msm: clock: Add support for more proc_comm clocks msm: clock: Invert debugfs directory layout msm: clock: Move debugfs code from clock.c to clock-debug.c msm: clock: Remove 7x30 and pcom includes from clock.h msm: clock: Remove unused code and definitions msm: Warning fix in trout gpio board file msm: Remove broken register definition from trout
2011-01-28msm: Clean up useless ifdefsStepan Moskovchenko
Remove ifdefs that do nothing, either from having the code between them previously removed, or from having been accidentally added to the wrong file. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Add support for more proc_comm clocksStephen Boyd
Add support for the ce, codec_ssbi, uart clocks, and i2c clocks. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Invert debugfs directory layoutStephen Boyd
There are currently 3 separate directories for clock debugging in debugfs: clk_enable, clk_rate, and clk_local. Each of these directories contains a list of clocks. This is rather annoying when you are focusing on one clock and want to enable/disable it and then check its rate. You either have to cd to the other directory or cat ../clk_rate/<clk>. Invert the layout so that there is one clock directory containing a directory for each clock. Inside each respective clock directory place an enable, rate, and is_local file relating to the clk_enable, clk_disable, and clk_local directories that exist today. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Move debugfs code from clock.c to clock-debug.cMatt Wagantall
The clock debugfs code is large enough, and easy enough to separate, that it deserves its own file which is compiled only when CONFIG_DEBUG_FS is enabled. Also, cleanup header file #includes that are no longer required. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Matt Wagantall <mattw@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Remove 7x30 and pcom includes from clock.hStephen Boyd
clock.h includes clock-pcom.h and clock-7x30.h when it really doesn't need to. Remove the includes and fixup breakages. Reviewed-By: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Remove unused code and definitionsStephen Boyd
This code is dead or otherwise useless so just remove it. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: Warning fix in trout gpio board fileDavid Brown
arch/arm/mach-msm/board-trout-gpio.c: In function 'trout_gpio_to_irq': arch/arm/mach-msm/board-trout-gpio.c:77: error: unused variable 'msm_gpio' Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: Remove broken register definition from troutDavid Brown
Missed a register change with the clock cleanup on the MSM7x01 targets. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-26Merge branch 'msm-8960' into msm-coreDavid Brown
* msm-8960: msm: Support for the MSM8960 RUMI3 target msm: Support for the MSM8960 Simulator target msm: Makefile cleanup msm: timer: Timer support for MSM8960 msm: Add MSM 8960 cpu_is check msm: irqs-8960: Interrupt map for MSM8960 msm: Physical offset for MSM8960 msm: io: I/O register definitions for MSM8960 msm: Generalize QGIC registers msm: Generalize timer register mappings msm: Add CPU queries
2011-01-24Merge branch 'msm-sdcc' into for-nextDavid Brown
* msm-sdcc: msm: 8x50: Add initial support for SDCC mmc: msm_sdcc: Add gpio handling function to driver drivers: mmc: msm: remove clock disable in probe mmc: msm: fix dma usage not to use internal APIs
2011-01-24Merge branch 'msm-8960' into for-nextDavid Brown
* msm-8960: msm: Support for the MSM8960 RUMI3 target msm: Support for the MSM8960 Simulator target msm: Makefile cleanup msm: timer: Timer support for MSM8960 msm: Add MSM 8960 cpu_is check msm: irqs-8960: Interrupt map for MSM8960 msm: Physical offset for MSM8960 msm: io: I/O register definitions for MSM8960 msm: Generalize QGIC registers msm: Generalize timer register mappings msm: Add CPU queries
2011-01-24Merge branch 'msm-uart' into for-nextDavid Brown
* msm-uart: serial: msm: Add support for UARTDM cores msm: Add name field to UART resources
2011-01-24ARM: msm: 7x30: don't force a gpiomux table for the whole archDima Zavin
This is completely board specific and therefore must be provided on a per-board basis. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: 8x50: Add initial support for SDCCSahitya Tummala
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-21mmc: msm_sdcc: Add gpio handling function to driverSahitya Tummala
Configure SDCC GPIOs when the host is powered up or powered off. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-21msm: Add name field to UART resourcesStepan Moskovchenko
Add a name field to the I/O resources for the UARTs on MSM targets in preparation for updates to the msm_serial driver. The driver assumed there is one I/O resource per UART, which is not the case on all targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Support for the MSM8960 RUMI3 targetStepan Moskovchenko
Add the machine record, init code, and build support for the MSM8960 RUMI3. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Support for the MSM8960 Simulator targetStepan Moskovchenko
Add the board file, Kconfig options, and Makefile options needed to build for the MSM8960 Simulator target. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Makefile cleanupStepan Moskovchenko
Clean up some of the conditionals in the Makefile in preparation for adding build support for MSM8960. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: timer: Timer support for MSM8960Stepan Moskovchenko
Modify the macros in the MSM timer driver to support the MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Add MSM 8960 cpu_is checkDavid Brown
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: irqs-8960: Interrupt map for MSM8960Stepan Moskovchenko
Add the interrupt map for the Qualcomm MSM8960 chip. This chip has an interrupt map that is different from previous targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Physical offset for MSM8960Stepan Moskovchenko
Add the physical memory offset value for the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: io: I/O register definitions for MSM8960Stepan Moskovchenko
Add the register address definitions for the basic hardware blocks on the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Generalize QGIC registersDavid Brown
The QGIC registers are mapped to the same virtual addresses across targets, only the physical address changes. Move the BASE address out of target-specific files, and add a SOC name to the base addresses. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Generalize timer register mappingsDavid Brown
Allow the timer register to be determined dynamically instead of at compile time. Use common virtual addresses for the registers across all MSM chips, and select the register mappings based on the detected CPU. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Add CPU queriesDavid Brown
Create runtime queries to distinguish the various MSM targets. Although these would probably be better named soc_is..., use cpu_is... to match convention in the rest of the kernel. Hard code the tests based on config options for now. When runtime device detection is implemented, these can be made dynamic. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-20Merge branch 'for-38-rc2' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-38-rc2' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: qsd8x50: Platform data isn't init data
2011-01-15Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13ARM: msm: irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Gregory Bean <gbean@codeaurora.org> Acked-by: Daniel Walker <dwalker@codeaurora.org>
2011-01-07msm: add SMP support for msmJeff Ohlstein
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-07msm: hotplug: support cpu hotplug on msmJeff Ohlstein
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-07msm: timer: SMP timer support for msmJeff Ohlstein
The msm provides timer hardware that is private to each core. Each timer has separate counter and match registers, so we create separate clock_event_devices for each core. For the global clocksource, use cpu 0's counter. Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-07msm: scm-boot: Support for setting cold/warm boot addressesStepan Moskovchenko
Add support for setting the cold boot address of core 1 and the warm boot addresses of cores 0 and 1 using a secure domain call. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-07msm: Secure Channel Manager (SCM) supportStephen Boyd
SCM is the protocol used to communicate between the secure and non-secure code executing on the applications processor. The non-secure side uses a physically contiguous buffer to pass information to the secure side; where the buffer conforms to a format that is agreed upon by both sides. The use of a buffer allows multiple pending requests to be in flight on the secure side. It also benefits use cases where the command or response buffer contains large chunks of data. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2011-01-06Merge branch 'misc' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2011-01-05Merge branch 'clksrc' into develRussell King
Conflicts: arch/arm/mach-vexpress/v2m.c arch/arm/plat-omap/counter_32k.c arch/arm/plat-versatile/Makefile
2010-12-22ARM: MSM: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Tested-By: Jeff Ohlstein <johlstei@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-20msm: qsd8x50: Platform data isn't init dataStephen Boyd
Remove the SMC91x platform and resource data from initdata. These will continue to be accessed after init, and must remain available. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-11 17:53:53 +0000