summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mxs/clock-mx28.c
AgeCommit message (Collapse)Author
2011-03-10ARM: mx28: set proper parent for lcdif clockShawn Guo
Most likely, the LCD panel on mx28 platform will require a pixel clock higher than ref_xtal_clk (24 MHz), so the patch initializes the parent of lcdif clock as ref_pix_clk. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: add dma deviceShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX23/28: Add framebuffer device supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com>
2011-03-01ARM: mxs: Add pwm clocks and device registrationSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-02-11Merge commit 'v2.6.38-rc4' into imx-for-2.6.39Sascha Hauer
Conflicts: arch/arm/mach-mxs/clock-mx28.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-03ARM: mxs: adjust flexcan clock definitionMarc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mxs/imx28: remove now unused clock lookup "fec.0"Uwe Kleine-König
Commit b2878fa (ARM: mx28: update clock and device name for dual fec support) added only the new lookups without removing the old one. Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mxs: fix clock base address missingShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-25ARM MXS: Add auart platform support for i.MX28Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24ARM i.MX28: use correct register for setting the rateSascha Hauer
_CLK_SET_RATE does not only handle the cpu clock but also other clocks, so do not hardcode the HW_CLKCTRL_CPU register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-24ARM i.MX28: fix bit operationSascha Hauer
reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-14ARM mxs: clkdev related compile fixesSascha Hauer
Since commit 6d803ba (ARM: 6483/1: arm & sh: factorised duplicated clkdev.c) platforms need to select CLKDEV_LOOKUP instead of COMMON_CLKDEV and need to include <linux/clkdev.h>. Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mxs: Change duart device to use amba-pl011Shawn Guo
The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM: mx28: update clock and device name for dual fec supportShawn Guo
Change device name from "fec" to "imx28-fec", so that fec driver can distinguish mx28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-20ARM: mxs: Add clock supportShawn Guo
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-03 16:05:20 +0000