summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/Makefile
AgeCommit message (Collapse)Author
2010-09-21OMAP1: PM: add simple runtime PM layer to manage clocksKevin Hilman
On OMAP1, we do not have omap_device + omap_hwmod to manage the device-specific idle, enable and shutdown. Instead, just enable/disable device clocks automatically at the runtime PM level. This allows drivers to not have any OMAP1 specific clock management and allows them to simply use the runtime PM API to manage clocks. OMAP1 compile fixes Manjunatha GK <manjugk@ti.com> Cc: Manjunatha GK <manjugk@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-05omap: Move omap1 USB platform init code into mach-omap1/usb.cTony Lindgren
Move omap1 FS USB platform init code into mach-omap1/usb.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-05OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by ↵Janusz Krzysztofik
the FIQ routine This patch introduces an IRQ handler used for processing interrupts generated by the FIQ handler when it decides there are data ready for processing. The handler further invokes device specific interrupt routines based on interrupt source counters passed from the FIQ handler. The handler setup function is intended to be called from the board provided init_machine() callback. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: Updated to include linux/io.h instead of plat/io.h Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-05OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt ↵Janusz Krzysztofik
processing This patch introduces a Fast Interrupt Request (FIQ) handler for Amstrad Delta (E3) videophone. The handler's purpose is to process interrupts generated by a GPIO line that a serial keyboard clock hangs off. It collects consecutive bits into words, pushing them into a buffer, then requests a higher level interrupt after one or more words are ready for further processing by a keyboard port driver. The handler also processes interrupts generated by two other GPIO lines, used by other on-board supported devices, by simply requesting a higher level interrupt, that in turn should invoke those device's specific irq handlers. IRQ12 line, not used by OMAP1510 hardware (described as reserved), has been choosen as a higher level interrupt source. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: convert boards to use physmap-flashLadislav Michl
Convert OMAP based boards to use physmap-flash. Refreshed against today's Linux omap kernel tree Cc: linux-mtd@lists.infradead.org Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: DMA: move LCD related code from plat-omap to mach-omap1Janusz Krzysztofik
All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and apparently only is available on a subset of OMAP1 chips). Move this code to mach-omap1/lcd_dma.c. Tested on OMAP1510 Amstrad Delta. Compile-tested with omap_generic_2420_defconfig. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: Split i2c platform init for mach-omap1 and mach-omap2Tony Lindgren
Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.cPaul Walmsley
The OMAP1 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the mpu_rate data structures out into their own files, opp.h and opp_data.c. In the long run, these mpu_rate tables should be replaced with OPP code. Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to mark omap1_clk_functions as __initdata to avoid a section warning: http://patchwork.kernel.org/patch/64366/ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Nishanth Menon <nm@ti.com>
2009-11-22omap1: Add board support and LCD for HTC HeraldCory Maccarrone
This patch introduces support for the HTC Herald (T-Mobile Wing, etc.) series of smart phones -- board support and LCD panel settings. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP1: Misc clean-upTony Lindgren
Remove unnecessary Kconfig line and allow compile of MBOX_FWK. Also allow building USB on Nokia 770. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03ARM: OMAP: McBSP: Add support for mcbsp on mach-omap1Eduardo Valentin
This patch adds support for mach-omap1 based on current mcbsp platform driver. Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03ARM: OMAP: SRAM: Move sram-fn.S from plat-omap to mach-omap1Tony Lindgren
This file is omap1 specific. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Timer32K: Move timer32k to mach-omap1Kevin Hilman
Move now OMAP1-specific timer32k code to mach-omap1 since OMAP2/3 32k timers are done in gptimer code. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Use MMC multislot structures for Siemens SX1 boardCarlos Eduardo Aguiar
Use MMC multislot structures for Siemens SX1 board Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Make omap1 use MMC multislot structuresFelipe Balbi
Make omap1 use new MMC multislot structures. The related MMC patches will be sent separately. Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br> Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Basic support for siemens sx1Vladimir Ananiev
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Palm Tungsten|T supportMarek Vasut
This patch adds board file and necessary includes for Palm Tungsten|T. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: PalmZ71 supportMarek Vasut
Palmz71 specific things - board file. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-05-08ARM: OMAP: Sync core code with linux-omapTony Lindgren
This patch syncs omap specific core code with linux-omap. Most of the changes are needed to fix bitrot caused by driver updates in linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26ARM: OMAP: Add core fsample supportBrian Swetland
This patch adds core support for the TI F-Sample Board (OMAP 850). Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-04-02[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren
Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3141/1: OMAP 1/5: Update omap1 specific filesTony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Omap1 serial pport and framebuffer init updates by Imre Deak - Add support for omap310 processor and Palm Tungsten E PDA by Laurent Gonzales, Romain Goyet, et al. Omap310 and omap1510 processors are now handled as omap15xx. - Omap1 specific changes to shared omap clock framework by Tony Lindgren - Omap1 specific changes to shared omap pin mux framework by Tony Lindgren - Other misc fixes, such as update memory timings for smc91x, omap1 specific device initialization etc. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08[ARM] 2890/1: OMAP 1/4: Update omap1 specific files, take 2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Convert more drivers to register resources in board-*.c to take advantage of the driver model by David Brownell and Ladislav Michl - Use set_irq_type() for GPIO interrupts instead of omap_set_gpio_edge_ctrl() by David Brownell - Add minimal support for handling optional add-on boards, such as OSK Mistral board with LCD and keypad, by David Brownell - Minimal support for loading functions to SRAM by Tony Lindgren - Wake up from serial port by muxing RX lines temporarily into GPIO interrupts by Tony Lindgren - 32KHz sched_clock by Tony Lindgren and Juha Yrjola Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 ↵Tony Lindgren
and omap2 Patch from Tony Lindgren This patch by Paul Mundt and other OMAP developers modifies ARM specific Kconfig to allow sharing code between OMAP1 and OMAP2 architectures. In order to share code between OMAP1 and OMAP2, all OMAP1 specific code is moved into mach-omap1 directory in the following patch. A new mach-omap2 directory will be added later on. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-08 11:44:20 +0000