summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/clock.c
AgeCommit message (Collapse)Author
2011-12-08ARM: OMAP1: Always reprogram dpll1 rate at bootJanusz Krzysztofik
DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(). However, it is already forced at boot, for boards which boot at unusable clock rates, and this seems to work correctly. OTOH, we now have a fine, run time performed clock selection algorithm implemented, which prevents less powerfull SoCs from being overclocked unintentionally. Allow reprogramming of dpll1 by default, and use it for switching to the higest supported clock rate with all boards, including those already booting at a usable rate of 60 MHz or above. Created against linux-omap/master tip as of Thu Dec 1, commit f83c2a8cbb59981722d1ab610c79adfd034a2667. Requires the just submitted patch "ARM: OMAP1: Move dpll1 rates selection from config to runtime" to prevent from unintentional overclocking. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08ARM: OMAP1: Update dpll1 default rate reprogramming methodJanusz Krzysztofik
According to comments in omap1_select_table_rate(), reprogramming dpll1 is tricky, and should always be done from SRAM. While being at it, move OMAP730 special case handling inside omap_sram_reprogram_clock(). Created on top of version 2 of the series "ARM: OMAP1: Fix dpll1 reprogramming related issues", which it depends on. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08ARM: OMAP1: Move dpll1 rates selection from config to runtimeJanusz Krzysztofik
For still better multi-OMAP1 support, expand omap1_rate_table with flags for different SoC types and match them while selecting clock rates. The idea is stolen from current omap24xx clock rate selection algorithm. Since clkdev platform flag definitions are reused here, those had to be expanded with one extra entry for OMAP1710 subtype, as this is the only SoC for which we allow selection of the highest, 216 MHz rate. Once done, remove no longer needed clock rate configure time options. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-26ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26OMAP1: clock: some cleanupPaul Walmsley
Convert most of the magic numbers in mach-omap1/clock_data.c to use macros. Clean up a few comments to conform with Documentation/CodingStyle. Mark the current clkops_uart as being OMAP16xx-only, and add some comments to indicate that it does not belong there, for future cleanup. This patch should not cause any functional changes. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP1 clock: fix section mismatch on clk_initFelipe Balbi
remove the section annotation from omap1_clk_disable_unused() to kill the section mismatch warning. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP4: clock: Add dummy clock nodes for interface clocksSantosh Shilimkar
On OMAP4 platform the iclk control is completly under hardware control and no software control is available. This difference w.r.t previous OMAP's needs all the common driver accross OMAP's , cpu_is_xxxx() checks. To avoid poulluting the drivers dummy clock nodes are created (The autogeneration script has been updated accordingly). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made OMAP1 dummy_ck common and edited patch to reuse that] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP clock: drop RATE_FIXED clock flagPaul Walmsley
The RATE_FIXED clock flag is pointless. In the OMAP1 clock code, it simply causes the omap1_clk_round_rate() function to return the current rate of the clock. omap1_clk_round_rate(), however, should never be called for a fixed-rate clock, since none of these clocks have a .round_rate function pointer set in their struct clk records. Similarly, in the OMAP2+ clock code, the RATE_FIXED flag just causes the clock code to emit a warning if the OMAP clock maintainer was foolish enough to add a .round_rate function pointer to a fixed-rate clock. "Doctor, it hurts when I pretend that a fixed-rate clock is rate-changeable." "Then don't pretend that a fixed-rate clock is rate-changeable." It has no functional value. This patch drops the RATE_FIXED clock flag, removing it from all clocks that are so marked. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2010-01-26OMAP1 clock: convert armwdt_ck to use the fixed divisor recalc functionPaul Walmsley
The armwdt_ck clock uses a fixed divisor, so it can use the OMAP clock fixed divisor recalculation code, rather than a custom function. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-20OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"Paul Walmsley
Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da caused clock initialization to fail on OMAP1 with "BUG: spinlock lockup on CPU#0" -- this is because omap1_select_table_rate() and omap1_round_to_table_rate() call clk_get_rate() with the clockfw spinlock held. Fix by accessing the rate directly from the internal clock framework functions. Thanks to Tony Lindgren <tony@atomide.com> for reporting and testing the fix. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.cPaul Walmsley
The OMAP1 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the mpu_rate data structures out into their own files, opp.h and opp_data.c. In the long run, these mpu_rate tables should be replaced with OPP code. Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to mark omap1_clk_functions as __initdata to avoid a section warning: http://patchwork.kernel.org/patch/64366/ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-11OMAP1 clock: convert test in disable_unused() to use ENABLE_ON_INITPaul Walmsley
mach-omap1/clock.c:omap1_clk_disable_unused() contains a test that assumes that the clock structures are available in the file's namespace. After a following patch, this will no longer be the case. So we need to reimplement that test. It turns out that we already have a facility in the clock framework to handle this case - the ENABLE_ON_INIT flag - used on OMAP2/3. Remove the offending test and mark the clocks that it was intended to catch as ENABLE_ON_INIT. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP1/2/3 clock: remove paranoid checks in preparation for ↵Paul Walmsley
clock{,2xxx,3xxx}_data.c Some parts of the clock code took advantage of the fact that the statically allocated clock tree was in clock{,24xx,34xx}.c's local namespace to do some extra argument checks. These are overzealous and are more difficult to maintain when the clock tree is in a separate namespace, so, remove them. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-11-22omap1: omap_udc: Add clocking and disable vbus sense for omap7xxCory Maccarrone
The l3_ocpi_ck clock is needed on omap7xx processors for USB. Additionally, bit 8 of the SOFT_REQ_REG needs to be enabled for the usb_dc_ck on omap7xx, which is a different bit than that of the omap16xx-defined clock of the same name. I added a provision for the usb_dc_ck and l3_ocpi_ck clocks as dc_clk and hhc_clk, respectively, for omap7xx CPUs. Additionally, I added a check in machine_without_vbus_sense for all omap7xx devices, as presently I know of no omap7xx-based devices that have vbus sense, and it made more sense to me to use a cpu check here than to spell out each machine one at a time. Finally, DMA is disabled for omap7xx, as it causes problems with these chips. Cc: linux-usb@vger.kernel.org Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap1: mmc: Add platform init for omap7xxCory Maccarrone
The MMC mux pins normally used by omap chips in devices.c are different from what is needed by omap7xx chips. This change adds a conditional around the mux setup code to enable the correct mux pins. The omap730 and omap850 both use a different clock for the "fck" clock of the MMC interface than other omap processors based on the SOFT_REQ_REG, pin 12. The "ick" clock is the same as that used by other omap processors. * Added the missing clock definition as mmc3_ck to clock.h * Added the clock definition to omap_clks in clock.c * Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c With these changes, it is now possible to initialize and use MMC cards with omap730 and omap850 devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-07OMAP7XX: Clocks: Add ck_ref and armxorAngelo Arrifano
These clocks are required for booting. Signed-off-by: Angelo Arrifano <miknix@gmail.com> Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Rename all the rest of the omap730 references in omap1 coreAlistair Buxton
This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. This updates all the remaining omap730 references in miscellaneous local variables, macros and similar. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Update core omap1 files to use omap7xx.hAlistair Buxton
This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Clocks: Add omap850 supportAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Initial clock support was done in the Linwizard tree by Zebediah C. McClure. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-05-12OMAP2xxx clock: rename clk_init_one() to clk_preinit()Paul Walmsley
Rename clk_init_one() to clk_preinit() to distinguish its function from clk_init() and the individual struct clk init functions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-04-06[ARM] omap: fix omap1 clock usecount decrement bugRussell King
Same fix as per a7f8c59, but for OMAP1 instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14[ARM] omap: arrange for clock recalc methods to return the rateRussell King
linux-omap source commit 33d000c99ee393fe2042f93e8422f94976d276ce introduces a way to "dry run" clock changes before they're committed. However, this involves putting logic to handle this into each and every recalc function, and unfortunately due to the caching, led to some bugs. Solve both of issues by making the recalc methods always return the clock rate for the clock, which the caller decides what to do with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: create a proper tree of clocksRussell King
Traditionally, we've tracked the parent/child relationships between clk structures by setting the child's parent member to point at the upstream clock. As a result, when decending the tree, we have had to scan all clocks to find the children. Avoid this wasteful scanning by keeping a list of the clock's children. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: Fix omap1 clock issuesTony Lindgren
This fixes booting, and is a step toward fixing things properly: - Make enable_reg u32 instead of u16 [rmk: virtual addresses are void __iomem *, not u32] - Get rid of VIRTUAL_IO_ADDRESS for clocks - Use __raw_read/write instead of omap_read/write for clock registers This patch adds a bunch of compile warnings until omap1 clock also uses offsets. linux-omap source commit is 9d1dff8638c9e96a401e1885f9948662e9ff9636. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: spi: arrange for omap_uwire to use connection IDRussell King
... which now means no driver requests the "armxor_ck" clock directly. Also, fix the error handling for clk_get(), ensuring that we propagate the error returned from clk_get(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: i2c: remove conditional ick clocksRussell King
By providing a dummy ick for OMAP1510 and OMAP310, we avoid having SoC conditional clock information in i2c-omap.c. Also, fix the error handling by making sure we propagate the error returned via clk_get(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: i2c: use short connection idsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: mcbsp: convert to use fck/ick clocks directlyRussell King
Rather than introducing a special 'mcbsp_clk' with code behind it in mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp driver to be like any other driver. mcbsp requests its fck and ick clocks directly, and the SoC specific code deals with selecting the correct clock. There is one oddity to deal with - OMAP1 fiddles with the DSP clocks and DSP reset, so we move this to the two callback functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: MMC: provide a dummy ick for OMAP1Russell King
Eliminate the OMAP1 vs OMAP2 clock knowledge in the MMC driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: MMC: convert clocks to match by devid and conidRussell King
Convert OMAP MMC driver to match clocks using the device ID and a connection ID rather than a clock name. This allows us to eliminate the OMAP1/OMAP2 differences for the function clock. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: watchdog: provide a dummy ick for OMAP1Russell King
Eliminate the OMAP1 vs OMAP2 clock knowledge in the watchdog driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: watchdog: convert clocks to match by devid and conidRussell King
This eliminates the need for separate OMAP24xx and OMAP34xx clock requesting code sections. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: provide a dummy clock nodeRussell King
By providing a dummy clock node, we can eliminate the SoC conditional clock handing in the OMAP drivers, moving this knowledge out of the driver and into the machine clock support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: convert OMAP1 to use clkdevRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: handle RATE_CKCTL via .set_rate/.round_rate methodsRussell King
It makes no sense to have the CKCTL rate selection implemented as a flag and a special exception in the top level set_rate/round_rate methods. Provide CKCTL set_rate/round_rate methods, and use these for where ever RATE_CKCTL is used and they're not already overridden. This allows us to remove the RATE_CKCTL flag. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: move propagate_rate() calls into generic omap clock codeRussell King
propagate_rate() is recursive, so it makes sense to minimise the amount of stack which is used for each recursion. So, rather than recursing back into it from the ->recalc functions if RATE_PROPAGATES is set, do that test at the higher level. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: remove unnecessary calls to propagate_rate()Russell King
We've always called propagate_rate() in the parent function to the .set_rate methods, so there's no point having the .set_rate methods also call this heavy-weight function - it's mere duplication of what's happening elsewhere. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: move clock propagation into core omap clock codeRussell King
Move the clock propagation calls for set_parent and set_rate into the core omap clock code, rather than having these calls scattered throughout the OMAP1 and OMAP2 implementations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: provide a NULL clock operations structureRussell King
... and use it for clocks which are ALWAYS_ENABLED. These clocks use a non-NULL enable_reg pointer for other purposes (such as selecting clock rates.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-02[ARM] omap: introduce clock operations structureRussell King
Collect up all the common enable/disable clock operation functions into a separate operations structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14Merge branch 'omap-all' into develRussell King
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05[ARM] omap: fix lots of 'Using plain integer as NULL pointer'Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05[ARM] omap: DSP registers don't need to be castedRussell King
We're now assigning/comparing void __iomem pointers with void __iomem pointer variables. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-08ARM: OMAP1: Change the comments to C styleDavid Cohen
Change the comments to C style Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: add SoSSI clockImre Deak
This is needed, so that disabling the SoSSI clock during idle can be prevented. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap1510->15xx conversions needed for sx1Vladimir Ananiev
Convert 1510->15xx in generic omap code, so that sx1 can work. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix CONFIG_DEBUG_LLDirk Behme
Fix broken CONFIG_DEBUG_LL. In case of low level debugging reconfigure some clocks early. See http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093 too. Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>