summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1
AgeCommit message (Collapse)Author
2009-12-11omap1: LCD_DMA: Use some define rather than a hexadecimalJanusz Krzysztofik
The patch corrects the issue introduced with one of my earlier patches: OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1] as pointed out by OMAP subsystem maintainer. Applies on top of my prevoius patch: OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2] Tested on Amstrad Delta Compile tested with omap_generic_2420_defconfig [1] http://patchwork.kernel.org/patch/57922/ [2] http://patchwork.kernel.org/patch/61952/ Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: I2C mux and clocks for omap7xxCory Maccarrone
This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: Add omap7xx USB supportCory Maccarrone
This change implements USB client side support into the HTC Herald board configuration. It uses a similar, but updated algorithm to initialize the USB as is used in the linwizard project. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: DMA: move LCD related code from plat-omap to mach-omap1Janusz Krzysztofik
All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and apparently only is available on a subset of OMAP1 chips). Move this code to mach-omap1/lcd_dma.c. Tested on OMAP1510 Amstrad Delta. Compile-tested with omap_generic_2420_defconfig. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: Use gen_nandLadislav Michl
Since omapnand driver never find its way into mainline, switch to gen_nand instead. Following patch is compile tested only, but it is based on code I wrote for NetStar board and runtime tested it there. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Cc: Imre Deak <imre.deak@nokia.com> Cc: Brian Swetland <swetland@google.com> Cc: Kevin Hilman <kjh@hilman.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: use smc91x_platdata to setup smc91xLadislav Michl
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff in smc91x driver Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: Split i2c platform init for mach-omap1 and mach-omap2Tony Lindgren
Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.cPaul Walmsley
The OMAP1 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the mpu_rate data structures out into their own files, opp.h and opp_data.c. In the long run, these mpu_rate tables should be replaced with OPP code. Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to mark omap1_clk_functions as __initdata to avoid a section warning: http://patchwork.kernel.org/patch/64366/ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-11OMAP1 clock: convert test in disable_unused() to use ENABLE_ON_INITPaul Walmsley
mach-omap1/clock.c:omap1_clk_disable_unused() contains a test that assumes that the clock structures are available in the file's namespace. After a following patch, this will no longer be the case. So we need to reimplement that test. It turns out that we already have a facility in the clock framework to handle this case - the ENABLE_ON_INIT flag - used on OMAP2/3. Remove the offending test and mark the clocks that it was intended to catch as ENABLE_ON_INIT. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP1/2/3 clock: remove paranoid checks in preparation for ↵Paul Walmsley
clock{,2xxx,3xxx}_data.c Some parts of the clock code took advantage of the fact that the statically allocated clock tree was in clock{,24xx,34xx}.c's local namespace to do some extra argument checks. These are overzealous and are more difficult to maintain when the clock tree is in a separate namespace, so, remove them. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-09OMAP: OMAPFB: split omapfb.hTomi Valkeinen
Split arch/arm/plat-omap/include/mach/omapfb.h into two files: include/linux/omapfb.h - ioctls etc for userspace and some kernel stuff for board files drivers/video/omap/omapfb.h - for omapfb internal use This cleans up omapfb.h and also makes it easier for the upcoming new DSS driver to co-exist with the old driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap1: Add board support and LCD for HTC HeraldCory Maccarrone
This patch introduces support for the HTC Herald (T-Mobile Wing, etc.) series of smart phones -- board support and LCD panel settings. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap1: omap_udc: Add clocking and disable vbus sense for omap7xxCory Maccarrone
The l3_ocpi_ck clock is needed on omap7xx processors for USB. Additionally, bit 8 of the SOFT_REQ_REG needs to be enabled for the usb_dc_ck on omap7xx, which is a different bit than that of the omap16xx-defined clock of the same name. I added a provision for the usb_dc_ck and l3_ocpi_ck clocks as dc_clk and hhc_clk, respectively, for omap7xx CPUs. Additionally, I added a check in machine_without_vbus_sense for all omap7xx devices, as presently I know of no omap7xx-based devices that have vbus sense, and it made more sense to me to use a cpu check here than to spell out each machine one at a time. Finally, DMA is disabled for omap7xx, as it causes problems with these chips. Cc: linux-usb@vger.kernel.org Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap1: mmc: Add platform init for omap7xxCory Maccarrone
The MMC mux pins normally used by omap chips in devices.c are different from what is needed by omap7xx chips. This change adds a conditional around the mux setup code to enable the correct mux pins. The omap730 and omap850 both use a different clock for the "fck" clock of the MMC interface than other omap processors based on the SOFT_REQ_REG, pin 12. The "ick" clock is the same as that used by other omap processors. * Added the missing clock definition as mmc3_ck to clock.h * Added the clock definition to omap_clks in clock.c * Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c With these changes, it is now possible to initialize and use MMC cards with omap730 and omap850 devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap: Eliminate OMAP_MAX_NR_PORTSAlexander Shishkin
Eliminate OMAP_MAX_NR_PORTS Note that also the null terminator entry for omap1 serial_platform_data needs to be now removed to avoid oopsing. Note that mach-omap1 uses struct plat_serial8250_port array, which requires a null terminator at the end, and that's why we need to use ARRAY_SIZE - 1. This is not needed on mach-omap2 as the array used is struct omap_uart_state, and does not use a null terminator. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-10Merge branch '7xx-iosplit-plat' with omap-fixesTony Lindgren
2009-10-22omap1: Fix DSP public peripherals support for ams-deltaJanusz Krzysztofik
DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?) machines as long as old dspgateway code were present in the l-o tree. For several months it is no longer included, breaking support for McBSP1 based audio on Amstrad Delta, for example. This patch, derived from the old dspgateway code, corrects the problem for the board by simply taking the DSP out of reset state, I guess. That way, things should not break when a new dsp code is added to the tree, and the change can be reverted then. If there are any reports on McBSP1 or other DSP public peripherals not working for other OMAP1 machines (I've not heard of any for now), I can prepare a more general patch providing an extra include file with a helper function defined. Created and tested against linux-2.6.32-rc5 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap1: Fix redundant UARTs pin muxing that can break other hardware supportJanusz Krzysztofik
Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart and OMAP_TAG_UART. This works for mach-omap2, but causes issues on mach-omap1 for some boards as the mach-omap1 serial.c was muxing pins based on the enabled_uart flag for 15xx. Fix this by muxing pins in board-*.c files for the 15xx boards for the uart ports that had enabled_uart flag set before the commit above. Tested on Amsdtrad Delta only. Note that in the future we should add support for powering down the uarts with a timer like mach-omap2/serial.c does. Otherwise the enabled uarts will be blocking retention-while-idle. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19omap: headers: Create headers necessary for compile under mach-omap1 and ↵Tony Lindgren
mach-omap2 Create the headers needed for compiling under mach-omap1/include/mach and mach-omap2/include/mach. This was done with the following script: #!/bin/bash mach_files="clkdev.h gpio.h hardware.h io.h irqs.h memory.h \ smp.h system.h timex.h uncompress.h vmalloc.h" omaps="mach-omap1 mach-omap2" mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" mkdir -p $plat_dir_new git add $plat_dir_new for dir in $omaps; do mach_dir_new="arch/arm/$dir/include/mach" for header in $mach_files; do file="$mach_dir_new/$header" if [ ! -f $file ]; then echo -ne "/*\n * $file\n */\n\n#include <plat/$header>\n" > $file git add $file if [ ! -f $plat_dir_new/$header ]; then git mv $mach_dir_old/$header $plat_dir_new/$header fi fi done done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19omap: headers: Move mtd-xip.h to be mach-omap1 specificTony Lindgren
These registers are omap1 specific. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19omap: Split vmalloc.h for mach-omap1 and mach-omap2Tony Lindgren
Earlier patch "omap: Remap L3, L4 to get more kernel io address space" changed the VMALLOC_END. However, this change causes problems on mach-omap1: BUG: mapping for 0xe0000000 at 0xe0000000 overlaps vmalloc space BUG: mapping for 0xe1000000 at 0xe1000000 overlaps vmalloc space Fix this by creating separate vmalloc.h files for mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2Tony Lindgren
Split entry-macro.S for mach-omap1 and mach-omap2 Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2Tony Lindgren
This also creates the include/mach subdirectories under mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-16omap: Change low-level serial init to use ioremapTony Lindgren
Change low-level serial init to use ioremap Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-07OMAP850: PM: Add an ARCH_OMAP850 checkAlistair Buxton
This just makes the same warning be printed on omap850 and omap730. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
2009-10-07OMAP7XX: Clocks: Add ck_ref and armxorAngelo Arrifano
These clocks are required for booting. Signed-off-by: Angelo Arrifano <miknix@gmail.com> Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Rename all the rest of the omap730 references in omap1 coreAlistair Buxton
This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. This updates all the remaining omap730 references in miscellaneous local variables, macros and similar. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Replace omap730 references in irqs.h and all usersAlistair Buxton
This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Update core omap1 files to use omap7xx.hAlistair Buxton
This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: McBSP: Add omap850 supportAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Clocks: Add omap850 supportAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Initial clock support was done in the Linwizard tree by Zebediah C. McClure. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: PM: Add omap850 supportAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Original omap850 support in Linwizard was done by cloning the omap730 code. That work was done by Zebediah C. McClure. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: IRQ: Remove duplicate omap850 codeAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This fixes a bug which prevents IRQs from being enabled on omap850 due to a missing check in entry-macro.S, which was found by Cory Maccarrone. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Mux: Remove duplicate omap850 codeAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: IO: Remove duplicate omap850 codeAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07OMAP7XX: Serial: Remove duplicate omap850 codeAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-09-24omap: Fix wrong jtag_id for 850Angelo Arrifano
Original message: The previous value of the jtag_id was set for the omap730. For the omap850, this value is different, and this was causing autodetection to fail. Reported-by: Cory Maccarrone <darkstar6262@gmail.com> Angelo Arrifano <miknix@gmail.com> Alistair Buxton <a.j.buxton@gmail.com> Signed-off-by: Angelo Arrifano <miknix@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP1: AMS_DELTA: add modem supportJanusz Krzysztofik
This patch adds support for modem device found on Amstrad E3 (Delta) board. Based on earlier patch by Jonathan McDowell, available at http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch. Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c. This patch is dependent on 8250 driver changes getting accepted upstream: http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove ifdefs for io.hTony Lindgren
Remove ifdefs for io.h Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS insteadTony Lindgren
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-07-25ARM: includecheck fix: mach-omap1/mcbsp.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: arch/arm/mach-omap1/mcbsp.c: mach/irqs.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-23OMAP1: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/arm/mach-omap1/board-nokia770.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-23OMAP1: Fix N770 MMC supportAndrew de Quincey
Some of the N770's MMC configuration options seem to have been dropped. This patch adds them back in again. Note that only the .ocr_mask change was /critical/, but I've added the .max_freq setting back as well, as the original sources had it. Can anyone confirm if this is unnecessary? Secondly, there is support in the original code for a 4wire/higher speed mode. As I don't have the requisite N770 hardware (I think it was a rev2 N770?) to test this, I can't really add it back. Signed-off-by: Andrew de Quincey <adq@lidskialf.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-23OMAP1: Fix compilation of arch/arm/mach-omap1/mailbox.cJonathan McDowell
This fixes the positioning of " in MODULE_AUTHOR, which is currently causing a build failure on latest git with CONFIG_OMAP_MBOX_FWK=m; the original breakage appears to date from the end of last year in a5abbbe52b7e89a7633319c5417bd4331f7ac8ed Signed-Off-By: Jonathan McDowell <noodles@earth.li> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28Merge branch 'omap-upstream' into for-nextTony Lindgren
Conflicts: arch/arm/mach-omap2/Makefile
2009-05-28ARM: OMAP1: Make 770 LCD workAndrew de Quincey
Make 770 LCD work by adding clk_add_alias(). Also remove the old unused functions. Note that the clk_add_alias() could probably be moved to arch/arm/clkdev.c later on. Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com
2009-05-28OMAP1: PM: update and decouple from OMAP2/3 PM coreKevin Hilman
Update OMAP1-specific PM infrastructure. This is a sync of what is in linux-omap for OMAP1. This mostly de-couples OMAP1 PM from OMAP2/3 PM and renames things accordingly, and removes omap2/3 specific code from OMAP1 specific headers. Original OMAP1 decoupling patch for OMAP PM branch by Paul Walmsley. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28OMAP2/3: PM: push core PM code from linux-omapKevin Hilman
This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>