summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap3evm.c
AgeCommit message (Collapse)Author
2012-12-14OMAP: board-files: fix i2c_bus for tfp410Tomi Valkeinen
The i2c handling in tfp410 driver, which handles converting parallel RGB to DVI, was changed in 958f2717b84e88bf833d996997fda8f73276f2af (OMAPDSS: TFP410: pdata rewrite). The patch changed what value the driver considers as invalid/undefined. Before the patch, 0 was the invalid value, but as 0 is a valid bus number, the patch changed this to -1. However, the fact was missed that many board files do not define the bus number at all, thus it's left to 0. This causes the driver to fail to get the i2c bus, exiting from the driver's probe with an error, meaning that the DVI output does not work for those boards. This patch fixes the issue by changing the i2c_bus number field in the driver's platform data from u16 to int, and setting the bus number to -1 in the board files for the boards that did not define the bus. The exception is devkit8000, for which the bus is set to 1, which is the correct bus for that board. The bug exists in v3.5+ kernels. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Thomas Weber <thomas@tomweber.eu> Cc: Thomas Weber <thomas@tomweber.eu> Cc: <stable@vger.kernel.org> # v3.5+ Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-08ARM: OMAP2+: board files: use SoC-specific system restart functionsPaul Walmsley
Modify the board files to use the SoC-specific system restart functions. At this point it's possible to remove omap_prcm_restart() from mach-omap2/prcm.c. While removing the prototypes for the now-unused restart functions, clean up a few more obsolete prototypes in mach-omap2/clock.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-10-24Merge branch 'omap-for-v3.8/cleanup-headers-usb' into ↵Tony Lindgren
omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap1/clock.c arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-cm-t35.c arch/arm/mach-omap2/board-igep0020.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-omap2/board-omap3logic.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/board-overo.c arch/arm/mach-omap2/board-rm680.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/twl-common.c arch/arm/mach-omap2/usb-host.c arch/arm/mach-omap2/usb-musb.c
2012-10-24ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>Felipe Balbi
In order to make single zImage work for ARM architecture, we need to make sure we don't depend on private headers. Move USB platform_data to <linux/platform_data/omap-usb.h> and add a minimal drivers/mfd/usb-omap.h. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated for local mfd/usb-omap.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-24ARM: OMAP2+: Introduce local usb.hTony Lindgren
Let's move what we can from plat/usb.h to the local usb.h for ARM common zImage support. This is needed so we can remove plat/usb.h for ARM common zImage support. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren
We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP2+: nand: unify init functionsAfzal Mohammed
Helper function for updating nand platform data has been added the capability to take timing structure arguement. Usage of omap_nand_flash_init() has been replaced by modifed one, omap_nand_flash_init was doing things similar to board_nand_init except that NAND CS# were being acquired based on bootloader setting. As CS# is hardwired for a given board, acquiring gpmc CS# has been removed, and updated with the value on board. NAND CS# used in beagle board & omap3evm was found to be CS0. Thomas Weber <thomas.weber.linux@googlemail.com> reported that value of devkit8000 to be CS0. Overo board was found to be using CS0 based on u-boot, while google grep says omap3touchbook too has CS0. Signed-off-by: Afzal Mohammed <afzal@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-10-11Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-07ARM: OMAP: omap3evm: fix new sparse warningPaul Walmsley
Commit e54adb1e79762d3591459e5b0e9b9ff578e33fdb ("ARM: OMAP: omap3evm: cleanup revision bits") adds a new sparse[1] warning: arch/arm/mach-omap2/board-omap3evm.c:90:4: warning: symbol 'get_omap3_evm_rev' was not declared. Should it be static? This symbol no longer appears to be used outside this file, so mark it static and remove the export. ... 1. https://sparse.wiki.kernel.org/index.php/Main_Page Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com>
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-09-20ARM: OMAP2+: Make gpmc-smsc911x.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-19ARM: omap: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
2012-09-16Merge 3.6-rc6 into usb-nextGreg Kroah-Hartman
This resolves the merge problems with: drivers/usb/dwc3/gadget.c drivers/usb/musb/tusb6010.c that had been seen in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_endTony Lindgren
We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: omap3evm: cleanup revision bitsIgor Grinberg
The omap3evm has its revision information bits inside the plat/board.h file. Those bits are not used anywhere in the upstream tree besides the board-omap3evm.c file. Move the OMAP3EVM_BOARD_GEN_* bits to the board file and remove the get_omap3_evm_rev() function declaration. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: cleanup struct omap_board_config_kernelIgor Grinberg
struct omap_board_config_kernel defined in the board files is always empty and does not bring any added value. Remove the struct omap_board_config_kernel instances from the board files. Also remove the omap_get_nr_config() macro and the omap_get_var_config() function as both are not used for quite a long time (if ever). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-05Merge tag 'v3.6-rc4' into asoc-omapMark Brown
Linux 3.6-rc4
2012-08-15ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for ↵Peter Ujfalusi
selected boards These boards have similar audio setup and they can all use the same driver for audio support if it is enabled in the kernel config. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-06Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"Igor Grinberg
1) The above commit introduced a common ->get_pendown_state() function into the generic code, but that function was board-specific for the OMAP3EVM and thus broke most other boards using this code. 2) The above commit was mis-merged introducing another bug which prevents the ads7846 driver probe function to succeed. The omap_ads7846_init() function frees the pendown GPIO in case there is no ->get_pendown_state() function set by the caller (board specific code), so it can be requested later by the ads7846 driver. The above commit add a common ->get_pendown_state() function without removing the gpio_free() call and thus once the ads7846 driver tries to use the pendown GPIO, it crashes as the pendown GPIO has not been requested. 3) The above commit introduces NO new functionality as get_pendown_state() function is already implemented in a suitable way by the ads7846 driver and the debounce time handling has already been fixed by commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code). This reverts commit 16aced80f6739beb2a6ff7b6f96c83ba80d331e8. Conflicts: arch/arm/mach-omap2/common-board-devices.c Solved by taking the working version prior to the above commit. Cc: Zumeng Chen <zumeng.chen@windriver.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-08-03usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.hFelipe Balbi
nop-usb-xceiv was polluting otg.h with its own function prototypes. Move those prototypes to a nop-usb-xceiv.h header. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-09ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS supportTony Lindgren
Commit cb8ca5897 (ARM: omap3evm: enable VBUS switch for EHCI tranceiver) added a new randconfig error if TWL4030_CORE is not selected: arch/arm/mach-omap2/board-omap3evm.c:368: undefined reference to `twl_i2c_read_u8' arch/arm/mach-omap2/board-omap3evm.c:370: undefined reference to `twl_i2c_write_u8' Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-06ARM: OMAP3530evm: set pendown_state and debounce time for ads7846Zumeng Chen
Currently most ads7846 config definitions for OMAP3 series boards have been moved to common-board-devices.c, and it is transparent for init. And it's no very proper to do gpio_request based on get_pendown_state since omap_ads7846_init knows everything about ads7846_config. So it's more fit to request gpio according to the right gpio_pendown and set debounce time conditionally. If we don't set proper debouce time, there are flooded interrupt counters of ads7846 responding to one time touch on screen, then the driver couldn't work very well. This patch has been validated on 3530evm. Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-06ARM: omap3evm: enable VBUS switch for EHCI tranceiverZumeng Chen
This was chosen by following the trace on the schematic from component U131 and U134 to the CPEN pin on the USB3320 device. TWL4030.GPIO2-...->(T2_GPIO2_3V3)U131-..>nUSB2_EN-..>U134-..>EXP_nUSB2_1V8 which starts EHCI tranceiver USB3320. This will set TWL4030.GPIO2 as output pin to drive EHCI tranceiver. Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-06ARM: OMAP3EVM: Adding USB internal LDOs board fileZumeng Chen
EHCI PHY requires these regulators: EVM Rev >=E --> VAUX2 EVM Rev < E --> VUSB1V5, VUSB1V8 Adding USB internal LDOs (vusb1v5 & vusb1v8) and VAUX2 to omap3evm board file. Also removing vaux2_{1/2/3} supplies as they are not used on omap3 evm. But we need not to add vaux2 in twl4030_platform_data since it will be added conditionally. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-06ARM: OMAP3EVM: Add NAND flash definitionZumeng Chen
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Zumeng Chen <zumeng.chen@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-10Merge tag 'omap-cleanup-dss-for-v3.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Clean up for omap DSS board init in preparation for adding DT support. By Tomi Valkeinen via Tomi Valkeinen (1) and Tony Lindgren (1) * tag 'omap-cleanup-dss-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: OMAPDSS: DSI: implement generic DSI pin config OMAPDSS: Taal: move reset gpio handling to taal driver OMAPDSS: TFP410: rename dvi files to tfp410 OMAPDSS: TFP410: rename dvi -> tfp410 OMAP: board-files: remove custom PD GPIO handling for DVI output OMAPDSS: panel-dvi: add PD gpio handling Resolved context conflicts in arch/arm/mach-omap2/board-omap4panda.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09OMAPDSS: TFP410: rename dvi files to tfp410Tomi Valkeinen
Now that the tfp410 driver has been renamed in the code, this patch finishes the renaming by renaming the files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAPDSS: TFP410: rename dvi -> tfp410Tomi Valkeinen
The driver for the TFP410 DPI-to-DVI chip was named quite badly as "DVI panel driver". This patch renames the code to use tfp410 name for the driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAP: board-files: remove custom PD GPIO handling for DVI outputTomi Valkeinen
Now that the panel-dvi driver handles the PD (power-down) GPIO, we can remove the custom PD handling from the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-08ARM: omap2: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP2+: clean up some cppcheck warningsPaul Walmsley
Resolve some warnings identified by cppcheck in arch/arm/mach-omap2: [arch/arm/mach-omap2/usb-tusb6010.c:129]: (style) Checking if unsigned variable 'tmp' is less than zero. [arch/arm/mach-omap2/prm_common.c:241]: (error) Possible null pointer dereference: irq_setup - otherwise it is redundant to check if irq_setup is null at line 247 [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'per_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'core_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm24xx.c:185]: (style) Variable 'only_idle' is assigned a value that is never used [arch/arm/mach-omap2/mux.c:254]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/mux.c:258]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/gpmc-onenand.c:178]: (style) Variable 'tick_ns' is assigned a value that is never used [arch/arm/mach-omap2/gpio.c:56]: (error) Possible null pointer dereference: pdata - otherwise it is redundant to check if pdata is null at line 57 [arch/arm/mach-omap2/devices.c:45]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/board-omap3evm.c:641] -> [arch/arm/mach-omap2/board-omap3evm.c:639]: (style) Found duplicate branches for if and else. [arch/arm/mach-omap2/am35xx-emac.c:95]: (style) Variable 'regval' is assigned a value that is never used [arch/arm/mach-omap2/devices.c:74]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:277]: (style) Variable 'per_prev_state' is assigned a value that is never used [arch/arm/plat-omap/dmtimer.c:352]: (error) Possible null pointer dereference: timer - otherwise it is redundant to check if timer is null at line 354 [arch/arm/plat-omap/omap_device.c:478]: (style) Variable 'c' is assigned a value that is never used [arch/arm/plat-omap/usb.c:42]: (style) Variable 'status' is assigned a value that is never used [arch/arm/mach-omap1/clock.c:197]: (style) Variable 'dpll1_rate' is assigned a value that is never used [arch/arm/mach-omap1/lcd_dma.c:60]: (style) struct or union member 'lcd_dma_info::size' is never used [arch/arm/mach-omap1/pm.c:572]: (style) Variable 'entry' is assigned a value that is never used Some of them are pretty good catches, such as gpio.c:56 and usb-tusb6010.c:129. Thanks to Jarkko Nikula for some comments on the sscanf() warnings. It seems that the kernel sscanf() ignores the field width anyway for the %d format, so those changes have been dropped from this second version. Thanks to Daniel Marjamäki <daniel.marjamaki@gmail.com> for pointing out that a variable was unnecessarily marked static in the board-omap3evm.c change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Charulatha Varadarajan <charu@ti.com> Cc: Daniel Marjamäki <daniel.marjamaki@gmail.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Charulatha Varadarajan <charu@ti.com> # for gpio.c
2012-04-03ARM: OMAP2+: smsc911x: Add fixed board regulatorsRuss Dill
Initialize fixed regulators in the board files. Trying to do this in a generic way in gpmc-smsc911x.c gets messy as the regulator may be provided by drivers, such as twl4030, for some boards. Signed-off-by: Russ Dill <russ.dill@ti.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: combined into one patch, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+: smsc911x: Remove unused rate calculationRuss Dill
Looking back into git history, this code was never used and was probably left over from a copy/paste. Signed-off-by: Russ Dill <russ.dill@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-29Merge branch 'fixes-gpio-to-irq' into fixesTony Lindgren
Conflicts: arch/arm/mach-omap1/board-htcherald.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/plat-omap/include/plat/gpio.h drivers/input/serio/ams_delta_serio.c
2012-03-29ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()Tarun Kanti DebBarma
The following commits change gpio-omap to use dynamic IRQ allocation: 25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ 384ebe1 gpio/omap: Add DT support to GPIO driver With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ is no longer valid. We must be using gpio_to_irq() instead. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-15Merge tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into next/fixes-non-critical * tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6: iomux-mx25.h slew rate adjusted for LCD __LD pins (update to v3.3-rc6) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-24ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __initTony Lindgren
Now that omap hsmmc init is split into two functions, it's safe to mark omap_hsmmc_init and omap_mux related functions to __init. This basically reverts the following fixes for the case where TWL was compiled as a module: a98f77b (ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()) 8930b4e (ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c) Additionally it fixes up the remaining section warnings for all callers of omap_mux functions. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-21OMAP3 EVM: remove out-of-bounds array access of gpio_ledsArnout Vandecappelle (Essensium/Mind)
Otherwise we can get the following warning on some compilers: arch/arm/mach-omap2/board-omap3evm.c:384:11: warning: array subscript is above array bounds The omap3evm BSP enables a GPIO LED on the twl4030 chip. However, the static gpio_leds array doesn't have an entry for it. This is most likely a copy-and-paste error, because it has been in there since the first commit of the omap3evm BSP (53c5ec31). Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> [tony@atomide.com: updated comments with the warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-20ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pinsTony Lindgren
Otherwise omap_device_build() and omap_mux related functions can't be marked as __init when twl is build as a module. If a board is using GPIO pins or regulators configured by an external chip, such as TWL PMIC on I2C bus, the board must mark those MMC controllers as deferred. Additionally both omap_hsmmc_init() and omap_hsmmc_late_init() must be called by the board. For MMC controllers using internal GPIO pins for card detect and regulators the slots don't need to be marked deferred. In this case calling omap_hsmmc_init() is sufficient. Only mark the MMC slots using gpio_cd or gpio_wd as deferred as noted by Igor Grinberg <grinberg@compulab.co.il>. Note that this patch does not change the behaviour for board-4430sdp.c board-omap4panda.c. These boards wrongly rely on the omap_hsmmc.c init function callback to configure the PMIC GPIO interrupt lines on external chip. If the PMIC interrupt lines are not configured during init, they will fail. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-13ARM: omap: resolve nebulous 'Error setting wl12xx data'Russell King
It's useful to print the error code when a called function fails so a diagnosis of why it failed is possible. In this case, it fails because we try to register some data for the wl12xx driver, but as the driver is not configured, a stub function is used which simply returns -ENOSYS. Let's do the simple thing for -rc and print the error code. Also, the return code from platform_register_device() at each of these sites was not being checked. Add some checking, and again print the error code. This should be fixed properly for the next merge window so we don't issue error messages merely because a driver is not configured. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05Merge branch 'restart' into for-linusRussell King
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: omap: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-21Merge branch 'irqchip-consolidation' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable Conflicts: arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/include/mach/omap4-common.h arch/arm/plat-omap/include/plat/irqs.h The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h and the other trivial conflicts resolved. The now empty ifdef in irqs.h was also eliminated.
2011-11-17ARM: 7159/1: OMAP: Introduce local common.h filesTony Lindgren
As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-15ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier
Convert the omap2plus platforms to be using CONFIG_MULTI_IRQ_HANDLER. Each machine is modified to provide either omap2_intc_handle_irq(), omap3_intc_handle_irq() or gic_handle_irq(). This allows for a major cleanup, removing the MULTI_OMAP setup from the interrupt path. Tested on both Panda and IGEPv2 (single kernel image) Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31arm: Add export.h to ARM specific files as required.Paul Gortmaker
These files all make use of one of the EXPORT_SYMBOL variants or the THIS_MODULE macro. So they will need <linux/export.h> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>