summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/clock2xxx.h
AgeCommit message (Collapse)Author
2012-11-12ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK partsRajendra Nayak
Clean all #ifdef's added to OMAP2 clock code to make it COMMON clk ready, not that CONFIG_COMMON_CLK is enabled. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: also drop CONFIG_COMMON_CLK tests around APLL recalc_rate functions] Signed-off-by: Mike Turquette <mturquette@ti.com> [paul@pwsan.com: remove some ifdefs in mach-omap2/io.c] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-12ARM: OMAP2xxx: clock: add APLL rate recalculation functionsPaul Walmsley
OMAP2420 and OMAP2430 chips each have two on-chip APLLs. When locked, one APLL generates a 96 MHz rate; the other, a 54 MHz rate. Previously we treated these clocks as fixed-rate clocks at the locked rates, but this isn't quite right. The locked rate should be returned when the APLL is locked, and a zero rate should be returned when the APLL is stopped. This patch adds the infrastructure that will be used by the CCF changes. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Mike Turquette <mturquette@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2012-11-12ARM: OMAP2: clock: Convert to common clkRajendra Nayak
Convert all OMAP2 specific platform files to use COMMON clk and keep all the changes under the CONFIG_COMMON_CLK macro check so it does not break any existing code. At a later point switch to COMMON clk and get rid of all old/legacy code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@ti.com> [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-08ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()Paul Walmsley
Convert the OMAP2xxx APLL code to use omap2_cm_wait_module_ready(), and move the low-level CM register manipulation functions to mach-omap2/cm2xxx.c. The objectives here are to remove the dependency on the deprecated omap2_cm_wait_idlest() function in mach-omap2/prcm.c, so that code can be removed later; and move low-level register accesses to the CM IP block to the CM code, which will soon be moved into drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08ARM: OMAP2xxx: clock: move virt_prcm_set code into clkt2xxx_virt_prcm_set.cPaul Walmsley
Collect all of the virt_prcm_set-specific clocktype code into mach-omap2/clkt2xxx_virt_prcm_set.c. Remove its dependency on the 'sclk' and 'vclk' global variables. Those variables will be removed by subsequent patches. This is part of the process of cleaning up the OMAP2xxx clock code and preparing for the removal of the omap_prcm_restart() function. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08ARM: OMAP2xxx: clock: remove global 'dclk' variablePaul Walmsley
Remove the global 'dclk' variable, instead replacing it with a variable local to the dpllcore clock type C file. This removes some of the special-case code surrounding the OMAP2xxx clock init. This patch is a prerequisite for the removal of the omap_prcm_restart() code from arch/arm/mach-omap2/prcm.c. It also cleans up some special-case OMAP2xxx clock code in the process. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2011-03-09OMAP: clock: fix compile warningFelipe Balbi
if building kernels without OMAP2 support, we will see a warning such as: arch/arm/mach-omap2/io.c: In function 'omap2_init_common_infrastructure': arch/arm/mach-omap2/io.c:389:3: warning: statement with no effect arch/arm/mach-omap2/io.c:391:3: warning: statement with no effect Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-01-27omap: Start using CONFIG_SOC_OMAPTony Lindgren
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2010-02-24OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own filesPaul Walmsley
In preparation for multi-OMAP2 kernels, split mach-omap2/clock2xxx_data.c into mach-omap2/clock2420_data.c and mach-omap2/clock2430_data.c. 2430 uses a different device space physical memory layout than past or future OMAPs, and we use a different virtual memory layout as well, which causes trouble for architecture-level code/data that tries to support both. We tried using offsets from the virtual base last year, but those patches never made it upstream; so after some discussion with Tony about the best all-around approach, we'll just grit our teeth and duplicate the structures. The maintenance advantages of a single kernel config that can compile and boot on OMAP2, 3, and 4 platforms are simply too compelling. This approach does have some nice benefits beyond multi-OMAP 2 kernel support. The runtime size of OMAP2420-specific and OMAP2430-specific kernels is smaller, since unused clocks for the other OMAP2 chip will no longer be compiled in. (At some point we will mark the clock data __initdata and allocate it during registration, which will eliminate the runtime memory advantage.) It also makes the clock trees slightly easier to read, since 2420-specific and 2430-specific clocks are no longer mixed together. This patch also splits 2430-specific clock code into its own file, mach-omap2/clock2430.c, which is only compiled in for 2430 builds - mostly for organizational clarity. While here, fix a bug in the OMAP2430 clock tree: "emul_ck" was incorrectly marked as being 2420-only, when actually it is present on both OMAP2420 and OMAP2430. Thanks to Tony for some good discussions about how to approach this problem. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2010-01-29OMAP2/3/4 clock: rename and clean the omap2_clk_init() functionsPaul Walmsley
Rename the omap2_clk_init() in the OMAP2, 3, and 4 clock code to be omap2xxx_clk_init(), omap3xxx_clk_init(), etc. Remove all traces of the (commented) old virt_prcm_set code from omap3xxx_clk_init() and omap4xxx_clk_init(), since this will be handled with the OPP code that is cooking in the PM branch. After this patch, there should be very little else in the clock code that blocks a multi-OMAP 2+3 kernel. (OMAP2420+OMAP2430 still has some outstanding issues that need to be resolved; this is pending on some additions to the hwmod data.) Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-onlyPaul Walmsley
omap2_clk_prepare_for_reboot() is only applicable to OMAP2xxx chips, so rename it to omap2xxx_clk_prepare_for_reboot() and only call it when running on OMAP2xxx chips. Remove the old stub in the OMAP3 clock code. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-28OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.cPaul Walmsley
Move the sys_clk clock functions from clock2xxx.c to mach-omap2/clkt2xxx_sys.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the sys_clk are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the sys_clk clock alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-28OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.cPaul Walmsley
Move the osc_clk clock functions from clock2xxx.c to mach-omap2/clkt2xxx_osc. This is intended to make the clock code easier to understand, since all of the functions needed to manage the osc_clk are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for osc_clk clocks alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-28OMAP2xxx clock: move the APLL clock code into mach-omap2/clkt2xxx_apll.cPaul Walmsley
Move the APLL-related clock functions from clock2xxx.c to mach-omap2/clkt2xxx_apll.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage APLLs are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for APLL clocks alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2009-12-11OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*Paul Walmsley
The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com>