summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/clock34xx.c
AgeCommit message (Collapse)Author
2012-11-12ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK partsRajendra Nayak
Clean all #ifdef's added to OMAP3 clock code to make it COMMON clk ready, not that CONFIG_COMMON_CLK is enabled. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@ti.com> [paul@pwsan.com: remove some ifdefs in mach-omap2/io.c] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-12ARM: OMAP3: clock: Convert to common clkRajendra Nayak
Convert all OMAP3 specific platform files to use COMMON clk and keep all the changes under the CONFIG_COMMON_CLK macro check so it does not break any existing code. At a later point switch to COMMON clk and get rid of all old/legacy code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-24Merge tag 'omap-cleanup-a-for-3.8' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm The first set of OMAP PRM/CM-related cleanup patches for 3.8. Prepares for the future move of the PRM/CM code to drivers/. Also includes some prcm.[ch] cleanup patches from the WDTIMER cleanup series that don't need external acks. Basic test logs for this branch on top of v3.7-rc2 are here: http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121021123719/ But due to the number of unrelated regressions present in v3.7-rc[12], it's not particularly usable as a testing base. With reverts, fixes, and workarounds applied as documented in: http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/README.txt the following test logs were obtained: http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121020231757/ which indicate that the series tests cleanly. Conflicts: arch/arm/mach-omap2/Makefile arch/arm/mach-omap2/clockdomain2xxx_3xxx.c arch/arm/mach-omap2/pm24xx.c
2012-10-21ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific filesPaul Walmsley
Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-18ARM: OMAP: remove plat/clock.hPaul Walmsley
Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: fixed to remove duplicate clock.h includes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-07OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocksPaul Walmsley
Mark each interface clock with a corresponding CM_AUTOIDLE bit with a clkops that has the allow_idle/deny_idle function pointers populated. This allows the OMAP clock framework to enable and disable autoidle for these clocks. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2010-12-21OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley
In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-24OMAP3/4 clock: split into per-chip family filesPaul Walmsley
clock34xx_data.c now contains data for the OMAP34xx family, the OMAP36xx family, and the OMAP3517 family, so rename it to clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the chip family-specific clock functions to clock34xx.c, clock36xx.c, or clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3 superset. The main goal here is to prepare to compile chip family-specific clock functions only for kernel builds that target that chip family. To get to that point, we also need to add CONFIG_SOC_* options for those other chip families; that will be done in future patches, planned for 2.6.35. OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL clkops structure. The OMAP4 variant of this clkops structure has been removed, and since there was nothing else currently in clock44xx.c, it too has been removed -- it can always be added back later when there is some content for it. (The OMAP4 clock autogeneration scripts have been updated accordingly.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ranjith Lohithakshan <ranjithl@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2010-02-24OMAP3630: Clock: Workaround for DPLL HS divider limitationMike Turquette
This patch implements a workaround for the DPLL HS divider limitation in OMAP3630 as given by Errata ID: i556. Errata: When PWRDN bit is set, it resets the internal HSDIVIDER divide-by value (Mx). The reset value gets loaded instead of the previous value. The following HSDIVIDERs exhibit above behavior: . DPLL4 : M6 / M5 / M4 / M3 / M2 (CM_CLKEN_PLL[31:26] register bits) . DPLL3 : M3 (CM_CLKEN_PLL[12] register bit). Work Around: It is mandatory to apply the following sequence to ensure the write value will be loaded in DPLL HSDIVIDER FSM: The global sequence when using PWRDN bit is the following: . Disable Mx HSDIVIDER clock output related functional clock enable bits (in CM_FCLKEN_xxx / CM_ICLKEN_xxx) . Enable PWRDN bit of HSDIVIDER . Disable PWRDN bit of HSDIVIDER . Read current HSDIVIDER register value . Write different value in HSDIVIDER register . Write expected value in HSDIVIDER register . Enable Mx HSDIVIDER clock output related functional clocks (CM_FCLKEN_xxx / CM_ICLKEN_xxx) Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Vijaykumar GN <vijaykumar.gn@ti.com> [paul@pwsan.com: updated patch to apply; made workaround function static; marked as being 36xx-specific] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP3 clock: Check return values for clk_get()Sanjeev Premi
This patch checks if clk_get() returned success for the clocks used in function omap2_clk_arch_init(). This version incorporates review comments from Kevin Hilman and Paul Walmsley. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24AM35xx: Add clock support for new modules on AM35xxRanjith Lohithakshan
This patch adds clock support for the following AM35xx modules - Ethernet MAC - CAN Controller (HECC) - New MUSB OTG Controller with integrated Phy - Video Processing Front End (VPFE) - Additional UART (UART4) Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP2/3 clock: Extend find_idlest() to pass back idle state valueRanjith Lohithakshan
Current implementation defines clock idle state indicators based on the cpu information (cpu_is_omap24xx() or cpu_is_omap34xx()) in a system wide manner. This patch extends the find_idlest() function in clkops to pass back the idle state indicator for that clock, thus allowing idle state indicators to be defined on a per clock basis if required. This is specifically needed on AM35xx devices as the new IPSS clocks indicates the idle status (0 is idle, 1 is ready) in a way just opposite to how its handled in OMAP3 (0 is ready, 1 is idle). Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> [paul@pwsan.com: updated to apply after commit 98c45457 et seq.] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-15omap3/4: Fix compile for multi-omap for clkops_noncore_dpll_opsTony Lindgren
Rename clkops_noncore_dpll_ops for omap3 and omap4. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-29OMAP2/3/4 clock: rename and clean the omap2_clk_init() functionsPaul Walmsley
Rename the omap2_clk_init() in the OMAP2, 3, and 4 clock code to be omap2xxx_clk_init(), omap3xxx_clk_init(), etc. Remove all traces of the (commented) old virt_prcm_set code from omap3xxx_clk_init() and omap4xxx_clk_init(), since this will be handled with the OPP code that is cooking in the PM branch. After this patch, there should be very little else in the clock code that blocks a multi-OMAP 2+3 kernel. (OMAP2420+OMAP2430 still has some outstanding issues that need to be resolved; this is pending on some additions to the hwmod data.) Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-onlyPaul Walmsley
omap2_clk_prepare_for_reboot() is only applicable to OMAP2xxx chips, so rename it to omap2xxx_clk_prepare_for_reboot() and only call it when running on OMAP2xxx chips. Remove the old stub in the OMAP3 clock code. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2/3 clock: remove unnecessary includes and clean up headerPaul Walmsley
Now that almost all of the code has been removed from clock2xxx.c and clock34xx.c, many of the includes are now unnecessary and can be removed. While we're here, standardize the initial comment blocks. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-01-29OMAP2/3 clock: clean up omap*_clk_arch_init()Paul Walmsley
In the OMAP3xxx clock code, remove the #ifdef CONFIG_ARCH_OMAP3 in clock34xx.c, since this file is only compiled for OMAP3xxx builds. Also, rename omap2_clk_arch_init in this file to omap3xxx_clk_arch_init() to pave the way for multi-OMAP kernels. Ensure that it is not executed on non-OMAP3xxx systems. In the OMAP2xxx clock code, rename omap2_clk_arch_init in this file to omap2xxx_clk_arch_init() to pave the way for multi-OMAP kernels. Ensure that it is not executed on non-OMAP2xxx systems. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-28OMAP3 clock: split out DPLL3 M2 divider functions into ↵Paul Walmsley
mach-omap2/clkt34xx_dpll3m2.c Split the DPLL3 M2 divider clock functions out of clock34xx.c and move them into mach-omap2/clkt34xx_dpll3m2.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the OMAP3 DPLL3 M2 divider are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the DPLL3 M2 clock alone. This should reduce unnecessary console noise when debugging DVFS. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap34xx/ directory, rather than shared with other chip types that don't use this clock type. This patch also lays the groundwork to skip compilation of this code on OMAP3 chips that don't support DVFS (e.g., AM35xx) via the Makefile, rather than via #ifdefs. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jouni Högander <jouni.hogander@nokia.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-26OMAP2/3/4 clock: combine all omap2_clk_functionsPaul Walmsley
The struct clk_functions for OMAP2, 3, and 4 are all essentially the same, so combine them. This removes one multi-OMAP kernel impediment and saves memory on multi-OMAP builds. The stubs for omap2_clk_{init,exit}_cpufreq() code will removed once the OPP layer code that's currently in Kevin's PM branch is merged. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-08OMAP2: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/arm/mach-omap2/clock34xx.c arch/arm/mach-omap2/io.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11ARM: OMAP4: PM: Move DPLL control apis to dpll.cRajendra Nayak
This patch moves all the dpll control api's to a common file dpll.c. This is in preperation of omap4 support wherein most of these api's can be reused. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11OMAP3 clock: convert clock34xx.h to clock34xx_data.cPaul Walmsley
The OMAP3 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk>
2009-12-11OMAP2/3: move SDRC macros to mach-omap2/sdrc.hPaul Walmsley
clock34xx.c contains some macros which probably belong in mach-omap2/sdrc.h. Move those macros to mach-omap2/sdrc.h. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP1/2/3 clock: remove paranoid checks in preparation for ↵Paul Walmsley
clock{,2xxx,3xxx}_data.c Some parts of the clock code took advantage of the fact that the statically allocated clock tree was in clock{,24xx,34xx}.c's local namespace to do some extra argument checks. These are overzealous and are more difficult to maintain when the clock tree is in a separate namespace, so, remove them. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-09OMAP: OMAPFB: add omapdss deviceTomi Valkeinen
The upcoming new display subsystem driver is divided to two devices, omapdss and omapfb, of which omapdss handles the actual hardware. This patch adds a dummy omapdss platform device for the current omapfb driver, which is then used to get the clocks. This will make it possible for the current and the new display drivers to co-exist. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com>
2009-12-08Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits) arm: omap: Add omap3_defconfig AM35xx: Defconfig for AM3517 EVM board AM35xx: Add support for AM3517 EVM board omap: 3630sdp: defconfig creation omap: 3630sdp: introduce 3630 sdp board support omap3: Add defconfig for IGEP v2 board omap3: Add minimal IGEP v2 support omap3: Add CompuLab CM-T35 defconfig omap3: Add CompuLab CM-T35 board support omap3: rx51: Add wl1251 wlan driver support omap3: rx51: Add SDRAM init omap1: Add default kernel configuration for Herald omap1: Add board support and LCD for HTC Herald omap: zoom2: update defconfig for LL_DEBUG_NONE omap: zoom3: defconfig creation omap3: zoom: Introduce zoom3 board support omap3: zoom: Drop i2c-1 speed to 2400 omap3: zoom: rename zoom2 name to generic zoom omap3: zoom: split board file for software reuse omap3evm: MIgrate to smsc911x ethernet driver ... Fix trivial conflict (two unrelated config options added next to each other) in arch/arm/mach-omap2/Makefile
2009-12-02ARM: 5843/1: OMAP3: add AMBA devices for ETM and ETBAlexander Shishkin
This enables on-chip tracing components found in omap3xxx. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-22Merge 7xx-iosplit-plat-merge with omap-fixesTony Lindgren
Merge branch '7xx-iosplit-plat-merge' into omap-for-linus
2009-11-17omap3: clock: Fix the DPLL freqsel computationsRajendra Nayak
Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped track down this bug. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar <h-bayrakdar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-05omap: Lock DPLL5 at bootRajendra Nayak
Lock DPLL5 at 120MHz at boot. The USBHOST 120MHz f-clock and USBTLL f-clock are the only users of this DPLL, and 120MHz is is the only recommended rate for these clocks. With this patch, the 60 MHz ULPI clock is generated correctly. Tested on an OMAP3430 SDP. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-09-03OMAP3 clock: Fixed processing of bootarg 'mpurate'Sanjeev Premi
The argument 'mpurate' had no effect on the MPU frequency. This patch fixes the same. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSBPaul Walmsley
Fix two bugs in the OMAP3 clock tree pertaining to the SSI, DSS, USBHOST, and HSOTGUSB devices. These devices are both interconnect initiators and targets. Without this patch, clk_enable()s on clocks for these modules can be very high latency (potentially up to ~200 milliseconds) and message such as the following are generated: Clock usbhost_48m_fck didn't enable in 100000 tries Two bugs are fixed by this patch. First, OMAP hardware only supports target CM_IDLEST register bits on ES2+ chips and beyond. ES1 chips should not wait for these clocks to enable. So, split the appropriate clocks into ES1 and ES2+ variants, so that kernels running on ES1 devices won't try to wait. Second, the current heuristic in omap2_clk_dflt_find_idlest() will fail for these clocks. It assumes that the CM_IDLEST bit to wait upon is the same as the CM_*CLKEN bit, which is false[1]. Fix by implementing custom clkops .find_idlest function pointers for the appropriate clocks that return the correct slave IDLEST bit shift. This was originally fixed in the linux-omap kernel during 2.6.29 in a slightly different manner[2][3]. In the medium-term future, all of the module IDLEST code will eventually be moved to the omap_hwmod code. Problem reported by Jarkko Nikula <jhnikula@gmail.com>: http://marc.info/?l=linux-omap&m=124306184903679&w=2 ... 1. See for example 34xx TRM Revision P Table 4-213 and 4-217 (for the DSS case). 2. http://www.spinics.net/lists/linux-omap/msg05512.html et seq. 3. http://lkml.indiana.edu/hypermail/linux/kernel/0901.3/01498.html Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com>
2009-07-24OMAP3 SDRC: add support for 2 SDRAM chip selectsJean Pihet
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3: Add support for DPLL3 divisor values higher than 2Tero Kristo
Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control. Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
2009-06-19OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock changePaul Walmsley
Program the SDRC_MR_0 register as well during SDRC clock changes. This register allows selection of the memory CAS latency. Some SDRAM chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency at lower clock rates. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock: add a short delay when lowering CORE clk ratePaul Walmsley
When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2 divider, add a short delay before returning to SDRAM to allow the SDRC time to stabilize. Without this delay, the system is prone to random panics upon re-entering SDRAM. This time delay varies based on MPU frequency. At 500MHz MPU frequency at room temperature, 64 loops seems to work okay; so add another 32 loops for environmental and process variation. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock: initialize SDRC timings at kernel startPaul Walmsley
On the OMAP3, initialize SDRC timings when the kernel boots. This ensures that the kernel is running with known, optimized SDRC timings, rather than whatever was configured by the bootloader. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-28OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM initKevin Hilman
Add D2D clocks (modem_fck, sad2d_ick, mad2d_ick) to clock framework and ensure that auto-idle bits are set for these clocks during PRCM init. Also add omap3_d2d_idle() function called durint PRCM setup which ensures D2D pins are MUX'd correctly to enable retention for standalone (no-modem) devices. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-26Merge branch 'omap-clock-upstream' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
for-next
2009-05-16ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2Tony Lindgren
This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak <imre.deak@nokia.com> Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-12OMAP2xxx clock: rename clk_init_one() to clk_preinit()Paul Walmsley
Rename clk_init_one() to clk_preinit() to distinguish its function from clk_init() and the individual struct clk init functions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12OMAP3 clock: use pr_debug() rather than pr_info() in some clock change codePaul Walmsley
The CORE DPLL M2 frequency change code should use pr_debug(), not pr_info(), for its debug messages. Same with omap2_clksel_round_rate_div(). While here, convert a few printk(KERN_ERR .. into pr_err(). Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHzPaul Walmsley
According to the 34xx TRM Rev. K section 11.2.4.4.11.1 "Purpose of the DLL/CDL Module," the SDRC delay-locked-loop can be locked at any SDRC clock frequency from 83MHz to 166MHz. CDP code unconditionally unlocked the DLL whenever shifting to a lower SDRC speed, but this seems unnecessary and error-prone, as the DLL is no longer able to compensate for process, voltage, and temperature variations. Instead, only unlock the DLL when the SDRC clock rate would be less than 83MHz. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12ARM: OMAP2/3: Add name for musb clocksTony Lindgren
With the clkdev, musb_core.c needs to register clock with name "ick". Once all the platforms using the musb driver have been converted to use clockdev, the clock name does not need to be passed from the low-level init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-02-19[ARM] omap: add support for bypassing DPLLsRussell King
This roughly corresponds with OMAP commits: 7d06c48, 3241b19, 88b5d9b, 18a5500, 9c909ac, 5c6497b, 8b1f0bd, 2ac1da8. For both OMAP2 and OMAP3, we note the reference and bypass clocks in the DPLL data structure. Whenever we modify the DPLL rate, we first ensure that both the reference and bypass clocks are enabled. Then, we decide whether to use the reference and DPLL, or the bypass clock if the desired rate is identical to the bypass rate, and program the DPLL appropriately. Finally, we update the clock's parent, and then disable the unused clocks. This keeps the parents correctly balanced, and more importantly ensures that the bypass clock is running whenever we reprogram the DPLL. This is especially important because the procedure for reprogramming the DPLL involves switching to the bypass clock. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14[ARM] omap: arrange for clock recalc methods to return the rateRussell King
linux-omap source commit 33d000c99ee393fe2042f93e8422f94976d276ce introduces a way to "dry run" clock changes before they're committed. However, this involves putting logic to handle this into each and every recalc function, and unfortunately due to the caching, led to some bugs. Solve both of issues by making the recalc methods always return the clock rate for the clock, which the caller decides what to do with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] OMAP2/3 clock: don't tinker with hardirqs when they are supposed to be ↵Paul Walmsley
disabled Clock rate change code executes inside a spinlock with hardirqs disabled. The only code that should be messing around with the hardirq state should be the plat-omap/clock.c code. In the omap2_reprogram_dpllcore() case, this probably just wastes cycles, but in the omap3_core_dpll_m2_set_rate() case, this is a nasty bug. linux-omap source commit is b9b6208dadb5e0d8b290900a3ffa911673ca97ed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: create a proper tree of clocksRussell King
Traditionally, we've tracked the parent/child relationships between clk structures by setting the child's parent member to point at the upstream clock. As a result, when decending the tree, we have had to scan all clocks to find the children. Avoid this wasteful scanning by keeping a list of the clock's children. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: clks: call recalc after any rate changeRussell King
This implements the remainder of: OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c from Paul Walmsley which is not covered by the previous: [ARM] omap: move clock propagation into core omap clock code [ARM] omap: remove unnecessary calls to propagate_rate() [ARM] omap: move propagate_rate() calls into generic omap clock code commits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>