summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/dpll3xxx.c
AgeCommit message (Collapse)Author
2011-10-07ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rateJon Hunter
This is a continuation of Mike Turquette's patch "OMAP3+: use DPLL's round_rate when setting rate". omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call omap2_get_dpll_rate() explicitly. It may be necessary for some DPLLs to use a different function and so use the DPLLs recalc() function pointer instead. An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier in addition to the usual MN multipler and dividers and therefore uses a different round_rate and recalc function. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Cc: Mike Turquette <mturquette@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> [paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL handling" patch; also reported by Misael] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP3+: dpll: assign clk rate from rounded rate during rate setMike Turquette
The rounded rate can differ from target rate, so to better reflect reality set clk->rate equal to the rounded rate when setting DPLL frequency. This avoids issues where the DPLL frequency is slightly different than what debugfs clock tree reports using the old target rate. An example of a clock that requires this is DPLL_ABE on OMAP4 which can have a 4x multiplier on top of the usual MN dividers depending on register settings. This requires a special round_rate function that might yield a rate different from the initial target. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP3+: dpll: use DPLL's round_rate when setting rateMike Turquette
omap3_noncore_dpll_set_rate uses omap2_dpll_round_rate explicitly. Instead use the struct clk pointer's round_rate function to allow for DPLL's with special needs. An example of a clock that requires this is DPLL_ABE on OMAP4 which can have a 4x multiplier on top of the usual MN dividers depending on register settings. This requires a special round_rate function that might yield a rate different from the initial target. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: split rate assignment portion into a separate patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-01-06Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2010-12-21OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4Jon Hunter
J-Type DPLLs have additional configuration parameters that need to be programmed when setting the multipler and divider for the DPLL. These parameters being the sigma delta divider (SD_DIV) for the DPLL and the digital controlled oscillator (DCO) to be used by the DPLL. The current code is implemented specifically to configure the OMAP3630 PER J-Type DPLL. The OMAP4430 USB DPLL is also a J-Type DPLL and so this code needs to be updated to work for both OMAP3 and OMAP4 devices and any other future devices that have J-TYPE DPLLs. For the OMAP3630 PER DPLL both the SD_DIV and DCO paramenters are used but for the OMAP4430 USB DPLL only the SD_DIV field is used. The current implementation will only program the SD_DIV and DCO fields if the DPLL has both and hence this does not work for OMAP4430. In order to make the code more generic add two new fields to the dpll_data structure for the SD_DIV field and DCO field bit-masks and only program these fields if the masks are defined for a specific DPLL. This simplifies the code and allows us to remove the flag DPLL_NO_DCO_SEL. Tested on OMAP36xx Zoom3 and OMAP4 Blaze. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: removed explicit inlining and added '_' prefix on lookup_*() functions; added testing info to commit message; added 35xx comments back in] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley
In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-11-26ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16fix typos concerning "hierarchy"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-24OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, ↵Paul Walmsley
includes, documentation The maximum DPLL multiplier (M) values for OMAP2xxx and OMAP3xxx are one increment higher than they should be. See for example the OMAP242x TRM Rev X Section 5.10.6 "Clock Generator Registers" and the OMAP36xx TRM Rev C Table 3-202 "CM_CLKSEL1_PLL". Programming a 0 into the DPLL's M register bitfield is valid for OMAP2/3 and indicates that the DPLL should enter MN-bypass mode. Also, increase the minimum multiplier (M) value for the DPLL rate rounding code from 1 to 2, to ensure that it does not inadvertently put the DPLL into bypass. Note that the register documentation in the OMAP2xxx and OMAP3xxx TRMs does not make clear that the actual DPLL divider value (the "N") is the content of the appropriate register bitfield for the N value, _plus one_. (In other words, an N register bitfield of 0 indicates a DPLL divider value of 1.) This is only clearly documented in the OMAP4430 TRM, in, for example, OMAP4430 TRM Rev A Table 3-1167 "CM_CLKSEL_DPLL_USB". While here, update copyrights, add kerneldoc for struct dpll_data, drop the unused struct dpll_data.max_tolerance field, remove some unnecessary #includes in DPLL-related code, and replace the #include of <linux/module.h> with <linux/list.h>, which is what was really needed. The OMAP4 clock autogenerator script has been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-02-24OMAP3 clock: introduce DPLL4 JtypeRichard Woodruff
DPLL4 for 3630 introduces a changed block called j type dpll, requiring special divisor bits and additional reg fields. To allow for silicons to use this, this is introduced as a flag and is enabled for 3630 silicon. OMAP4 also has j type dpll for usb. Tested with 3630 ZOOM3 and OMAP3430 ZOOM2 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Vishwanath BS <Vishwanath.bs@ti.com> [paul@pwsan.com: added some comments; updated copyrights and credits; fixed some style issues] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP3 clock: Remove FreqSel for 3630Vishwanath BS
DPLL_FREQSEL field in CLKEN_PLL register is no longer valid for OMAP3630. So remove references to that. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> [paul@pwsan.com: added comment fix from Sergei Shtylyov] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP3 DPLL: reorganize static functionsPaul Walmsley
Move all static functions up to the top of the file to match the practice in other OMAP clock code. Make omap3_noncore_dpll_program() static (noted by sparse) and prepend an underscore to the function name to mark that it is file-local. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-26OMAP3 clock: move OMAP3-specific DPLL functions to dpll3xxx.cPaul Walmsley
Mark the OMAP3-specific DPLL functions as being OMAP3-specific by moving them from mach-omap2/dpll.c to mach-omap2/dpll3xxx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>