summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/mux.h
AgeCommit message (Collapse)Author
2010-12-02arm: mach-omap2: remove NULL board_mux from board filesAaro Koskinen
If CONFIG_OMAP_MUX is not enabled, we can define board_mux in the header file instead of forcing every single board to define it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated for combined board-zoom files] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-17OMAP4: mux: Add CBS package data for OMAP4430 ES2Benoit Cousson
Please note that the full muxmodes are re-defined for ES2 instead of using the subset. There are 81 differences among 204 pins. The subset fixup will have to iterate over the whole list for each subset entry, which can lead to an important number of iteration. On the other hand, it will take much more memory at boot time. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17OMAP4: mux: Add CBL package data for OMAP4430 ES1Benoit Cousson
Add data for OMAP4430 generated from HW pinout & register database. The data set is split in two partitions for both core and wkup. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-17OMAP: mux: Add support for control module split in several partitionsBenoit Cousson
Starting on OMAP4, the pin mux configuration is located in two different partitions of the control module (CODE_PAD and WKUP_PAD). The first one is inside the core power domain whereas the second one is inside the wakeup. - Add the capability to add any number of partition during board init time depending of Soc partitioning. - Add some init flags as well in order to avoid explicit Soc version check inside the mux core code. - Add a comment with mux0 mode on top of omap_mux/board/<partition> if the current mux mode is not the default one. Thanks to Tony Lindgren <tony@atomide.com> for the following improvements: - Add omap_mux_get for getting the partition data so platform level device code can use it. - Fix the rx51 board code to use the new API. - Do not store the partition for each mux entry. Look up the partition for debugfs instead. Thanks to Dan Murphy <dmurphy@ti.com> for testing on OMAP4 and reporting a couple of bugs. Thanks to Anand Gadiyar <gadiyar@ti.com> for testing on OMAP3 zoom and bug report. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Murphy Dan <dmurphy@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-10-01omap: Fix omap_mux_init_signal not to trash muxnameTony Lindgren
Otherwise the muxname passed to the function will get truncated. Based on an earlier patch by rockefeller.lin@innocomm.com. Reported-by: rockefeller.lin@innocomm.com Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Add data for 2430Tony Lindgren
Add data for 2430. Big thanks to Paul Walmsley <paul@pwsan.com> for generating usable mux data out of TRMs. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Add data for 2420Tony Lindgren
Add data for 2420. Big thanks to Paul Walmsley <paul@pwsan.com> for generating usable mux data out of TRMs. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Allow compiling in new mux code on all mach-omap2 systemsTony Lindgren
Allow compiling in new mux code on all mach-omap2 systems Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Renumber package defines to make room for older 24xx packagesTony Lindgren
Only POP and SIP are known to exist for 2420, 2430 seems to only have SIP package available. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-19omap: Fix functions for dynamic remuxing of pinsTony Lindgren
Make the omap_mux_read and write available for board code, and rename omap_mux_set_board_signals into omap_mux_write_array. Also add the related prototypes and comments into mux.h. In some cases we want to change the signals dynamically, mostly for power management. Note that we cannot use the signal names as they are set __init to save memory. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add 36xx CBP package supportTony Lindgren
Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style pin multiplexing data for 34xxTony Lindgren
Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style pin multiplexing code for omap3Tony Lindgren
Initially only for 34xx. This code allows us to: - Make the code more generic as the omap internal signal names can stay the same across omap generations for some devices - Map mux registers to GPIO registers that is needed for dynamic muxing of pins during off-idle - Override bootloader mux values via kernel cmdline using omap_mux=some.signa1=0x1234,some.signal2=0x1234 - View and set the mux registers via debugfs if CONFIG_DEBUG_FS is enabled Cc: Mike Rapoport <mike@compulab.co.il> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>