summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/pm.c
AgeCommit message (Collapse)Author
2012-05-08ARM: omap2: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
2012-03-29ARM: OMAP: pm: fix compilation breakGovindraj.R
Fix the compilation break observed on latest mainline caused by 9f97da78 (Disintegrate asm/system.h for ARM): arch/arm/mach-omap1/pm.c: In function 'omap_pm_prepare': arch/arm/mach-omap1/pm.c:587: error: implicit declaration of function 'disable_hlt' arch/arm/mach-omap1/pm.c: In function 'omap_pm_finish': arch/arm/mach-omap1/pm.c:624: error: implicit declaration of function 'enable_hlt' arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:681: error: 'arm_pm_idle' undeclared (first use in this function) ... arch/arm/mach-omap2/pm.c: In function 'omap_pm_begin': arch/arm/mach-omap2/pm.c:239: error: implicit declaration of function 'disable_hlt' arch/arm/mach-omap2/pm.c: In function 'omap_pm_end': arch/arm/mach-omap2/pm.c:247: error: implicit declaration of function 'enable_hlt' Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated to fix omap1 too] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-27Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
2012-03-15Merge tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into next/fixes-non-critical * tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6: iomux-mx25.h slew rate adjusted for LCD __LD pins (update to v3.3-rc6) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-13Merge branch 'next/cleanup-exynos-clock' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup * 'next/cleanup-exynos-clock' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs (includes an update to v3.3-rc6)
2012-03-08Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dtOlof Johansson
* 'dt' of git://github.com/hzhuang1/linux: (6 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support (plus update to v3.3-rc6)
2012-03-07Merge branch 'fixes-non-critical-part2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical * 'fixes-non-critical-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3+: PM: VP: fix integer truncation error ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices() ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected ARM: OMAP1: Fix section mismatch for omap1_init_early() ARM: OMAP1: Fix typo in lcd_dma.c ARM: OMAP: mailbox: trivial whitespace fix ARM: OMAP: Remove definition cpu_is_omap4430() ARM: OMAP2+: included some headers twice ARM: OMAP: clock.c: included linux/debugfs.h twice ARM: OMAP: don't build hwspinlock in vain ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided ARM: omap: pandora: fix usbhs platform data ARM: OMAP: sram: Add am33xx SRAM support (minimal) ARM: OMAP2+: id: Add am33xx SoC type detection ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support
2012-03-06ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices()Kevin Hilman
Fix the below warning by making omap2_init_processor_devices() __init. It is called by an __init function and calls only __init functions, so it should also be init. WARNING: arch/arm/mach-omap2/built-in.o(.text+0x183c): Section mismatch in reference from the function omap2_init_processor_devices() to the function .init.text:_init_omap_device() The function omap2_init_processor_devices() references the function __init _init_omap_device(). This is often because omap2_init_processor_devices lacks a __init annotation or the annotation of _init_omap_device is wrong. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-05ARM: OMAP2+: PM: share some suspend-related functions across OMAP2, 3, 4Paul Walmsley
The platform_suspend_ops can be shared across OMAP2, 3, and 4, along with all of the functions referenced in that structure. This patch shares them. It also removes the suspend_state file-scoped variable in the OMAP2 and 3 PM code; it does not appear to be actually needed by anything. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [khilman@ti.com: minor rework needed due to rebase/merge with conflicting changes] Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP2+: PM: share clkdms_setup() across OMAP2, 3, 4Paul Walmsley
clkdms_setup() is identical across OMAP2, 3, and 4, so share it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP2+: PM: clean up omap_set_pwrdm_state()Paul Walmsley
Clean up a few different parts of omap_set_pwrdm_state(): - Remove a superfluous call to pwrdm_state_switch(). Not needed unless LOWPOWERSTATECHANGE is used, because the state switch code is called by either clkdm_sleep() or clkdm_allow_idle(). - Add code to wait for the power state transition in the OMAP4+ low power state change. This is speculative, so I would particularly appreciate feedback on this part. - Remove a superfluous call to pwrdm_read_pwrst(). - Update variable names to be more meaningful (hopefully) and precise. - Fix an error path bug that would not place the clockdomain back into hardware-supervised idle or sleep mode if the power state could not be programmed. The documentation for this function still needs major improvements; that's left for a later patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-02-24ARM: OMAP: convert omap_device_build() and callers to __initKevin Hilman
Building omap_devices should only be done at init time, and since omap_device_build() is using early_platform calls which are also __init, this ensures that omap_device isn't trying to use functions that disappear. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-16ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DTBenoit Cousson
In the case of DT, the PMIC and SR initialization will be done using a completely different mechanism. Disable this part if a DT blob is available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-14ARM: OMAP: add RCU locking to omap2_set_init_voltage.NeilBrown
opp_find_freq_ceil and opp_get_voltage are documented as requiring rcu_lock to be held. So hold it. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-12-05Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-11-23ARM: OMAP: PM: only register TWL with voltage layer when device is presentKevin Hilman
Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-17ARM: 7159/1: OMAP: Introduce local common.h filesTony Lindgren
As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31arm: Add export.h to ARM specific files as required.Paul Gortmaker
These files all make use of one of the EXPORT_SYMBOL variants or the THIS_MODULE macro. So they will need <linux/export.h> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-04arm/dts: OMAP3+: Add mpu, dsp and iva nodesBenoit Cousson
Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PMBenoit Cousson
Since the device pointer is now retrieved using the hwmod name, remove the static variables used to store the device pointers for DSP, MPU, IVA and L3 devices for PM/DVFS usage. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP2+: pm: Use hwmod name instead of dev pointerBenoit Cousson
Replace the struct device parameter of omap2_set_init_voltage by the hwmod name. It will avoid having to store explicitely the device pointer into a static variable. Moreover, it will be a little bit more scalable if we introduce new DVFS devices. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04Merge branches 'cleanup-part3', 'voltage', 'dmtimer' and 'l3' into dt-baseTony Lindgren
2011-09-22Merge branch 'for_3.2/pm-cleanup' of ↵Tony Lindgren
git://gitorious.org/khilman/linux-omap-pm into cleanup
2011-09-15OMAP: omap_device: when building return platform_device instead of omap_deviceKevin Hilman
All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: voltage: rename scale and reset functions using voltdm_ prefixKevin Hilman
Rename voltage scaling related functions to use voltdm_ prefix intead of omap_voltage_, and cleanup kerneldoc comments in the process. s/omap_voltage_scale_vdd/voltdm_scale/ s/omap_voltage_reset/voltdm_reset/ Also, in voltdm_reset() s/target_uvdc/target_volt/ to be consistent with naming throughout the file. No functional changes. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva"Kevin Hilman
This voltage domain (a.k.a. VDD1) contains both the MPU and the IVA, so rename appropriately. Also fixup any users of the "mpu" name to use "mpu_iva" Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: start towards a new voltagedomain layerKevin Hilman
Start cleaning up the voltage layer to have a voltage domain layer that resembles the structure of the existing clock and power domain layers. To that end: - move the 'struct voltagedomain' out of 'struct omap_vdd_info' to become the primary data structure. - convert any functions taking a pointer to struct omap_vdd_info into functions taking a struct voltagedomain pointer. - convert the register & initialize of voltage domains to look like that of powerdomains - convert omap_voltage_domain_lookup() to voltdm_lookup(), modeled after the current powerdomain and clockdomain lookup functions. - omap_voltage_late_init(): only configure VDD info when the vdd_info struct is non-NULL Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-30OMAP2+: PM: clean up error messages: replace printk with pr_err.Johan Hovold
Also, clean up error messages by adding missing whitespace, fixing capitalisations, removing double newlines, and reducing verbosity. Signed-off-by: Johan Hovold <jhovold@gmail.com> [khilman@ti.com: minor changelog/subject edits] Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-30OMAP2+: PM: fix typos in misc. comment and error messagesJohan Hovold
Fix misc. typos in various comment and error message. Signed-off-by: Johan Hovold <jhovold@gmail.com> [khilman@ti.com: minor changelog/subject edits] Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-19OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain ↵Santosh Shilimkar
force wakeup While using clockdomain force wakeup method, not waiting for powerdomain to be effectively ON may end up locking the clockdomain FSM until a next wakeup event occurs. One such issue was seen on OMAP4430, where L4_PER was periodically getting stuck in in-transition state when transitioning from from OSWR to ON. This issue was reported and investigated by Patrick Titiano <p-titiano@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reported-by: Patrick Titiano <p-titiano@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: updated to apply; added transition wait on clkdm_deny_idle(); remove two superfluous pwrdm_wait_transition() calls] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10OMAP2+: PM: idle clkdms only if already in idleRajendra Nayak
The omap_set_pwrdm_state function forces clockdomains to idle, without checking the existing idle state programmed, instead based solely on the HW capability of the clockdomain to support idle. This is wrong and the clockdomains should be idled post a state_switch *only* if idle transitions on the clockdomain were already enabled. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP2+: PM: Initialise sleep_switch to a non-valid valueRajendra Nayak
sleep_switch which is initialised to 0 in omap_set_pwrdm_state happens to be a valid sleep_switch type (FORCEWAKEUP_SWITCH) which are defined as: #define FORCEWAKEUP_SWITCH 0 #define LOWPOWERSTATE_SWITCH 1 This causes the function to wrongly program some clock domains even when the Powerdomain is in ON state. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-26OMAP4: Intialize IVA Device in addition to DSP device.Shweta Gulati
OMAP4 has two different Devices IVA and DSP. DSP is bound with IVA for DVFS. The registration of IVA dev in API 'omap2_init_processor_devices' was missing. Init dev for 'iva_dev' is added. This also fixes the following error seen during boot as omap2_set_init_voltage can now find the iva device omap2_set_init_voltage: Invalid parameters! omap2_set_init_voltage: Unable to put vdd_iva to its init voltage Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-11Merge branch 'integration-2.6.39-for-tony' of ↵Tony Lindgren
git://git.pwsan.com/linux-integration into omap-for-linus Conflicts: arch/arm/mach-omap2/pm34xx.c
2011-03-09OMAP3: PM: Initialize IVA only if availableSanjeev Premi
IVA device is not present in many OMAP3 variants. This patch ensures that initialization is tied to the presence of IVA on the device. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-07OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.hPaul Walmsley
At this point in time, there's no reason for this header file to be in plat-omap/include/plat/voltage.h. It should not be included by device drivers, and the code that uses it is currently all under mach-omap2/. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25OMAP: clockdomain: Arch specific funcs for hwsup control of clkdmRajendra Nayak
Define the following architecture specific funtions for omap2/3/4 .clkdm_allow_idle .clkdm_deny_idle Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_allow_idle as clkdm_allow_idle and omap2_clkdm_deny_idle as clkdm_deny_idle. Make the _clkdm_add_autodeps and _clkdm_del_autodeps as non-static so they can be accessed from OMAP2/3 platform specific code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdmRajendra Nayak
Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-22OMAP4: PM: Program correct init voltages for scalable VDDsThara Gopinath
By default the system boots up at nominal voltage for every voltage domain in the system. This patch puts vdd_mpu, vdd_iva and vdd_core to the correct boot up voltage as per the opp tables specified. This patch implements this by matching the rate of the main clock of the voltage domain with the opp table and picking up the correct voltage. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22OMAP4: Register voltage PMIC parameters with the voltage layerThara Gopinath
TWL6030 is the power IC used along with OMAP4 in OMAP4 SDPs, blaze boards and panda boards. This patch registers the OMAP4 PMIC specific information with the voltage layer. This also involves implementing a different formula for voltage to vsel and vsel to voltage calculations from TWL4030. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22OMAP3: PM: Program correct init voltages for VDD1 and VDD2Thara Gopinath
By default the system boots up at nominal voltage for every voltage domain in the system. This patch puts VDD1 and VDD2 to the correct boot up voltage as per the opp tables specified. This patch implements this by matching the rate of the main clock of the voltage domain with the opp table and picking up the correct voltage. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22OMAP3: PM: Register TWL4030 pmic info with the voltage driver.Thara Gopinath
This patch registers the TWL4030 PMIC specific informtion with the voltage driver. Failing this patch the voltage driver is unware of the formula to use for vsel to voltage and vice versa conversion and lot of other PMIC dependent parameters. This file is based on the arch/arm/plat-omap opp_twl_tpl.c file by Paul Walmsley. The original file is replaced by this file. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22OMAP3: PM: Adding smartreflex device file.Thara Gopinath
This patch adds support for device registration of various smartreflex module present in the system. This patch introduces the platform data for smartreflex devices which include the efused n-target vaules, a parameter to indicate whether smartreflex autocompensation needs to be enabled on init or not. An API omap_enable_smartreflex_on_init is provided for the board files to enable smartreflex autocompensation during system boot up. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22OMAP3: PM: Adding voltage driver support.Thara Gopinath
This patch adds voltage driver support for OMAP3. The driver allows configuring the voltage controller and voltage processors during init and exports APIs to enable/disable voltage processors, scale voltage and reset voltage. The driver maintains the global voltage table on a per VDD basis which contains the various voltages supported by the VDD along with per voltage dependent data like smartreflex efuse offset, errminlimit and voltage processor errorgain. The driver also allows the voltage parameters dependent on the PMIC to be passed from the PMIC file through an API. The driver allows scaling of VDD voltages either through "vc bypass method" or through "vp forceupdate method" the choice being configurable through the board file. This patch contains code originally in linux omap pm branch smartreflex driver. Major contributors to this driver are Lesly A M, Rajendra Nayak, Kalle Jokiniemi, Paul Walmsley, Nishant Menon, Kevin Hilman. The separation of PMIC parameters into a separate structure which can be populated from the PMIC file is based on the work of Lun Chang from Motorola in an internal tree. Signed-off-by: Thara Gopinath <thara@ti.com> [khilman: fixed link error for OMAP2-only defconfig] Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP4: PM: Do not assume clkdm supports hw transitionsRajendra Nayak
omap_set_pwrdm_state today assumes a clkdm supports hw_auto transitions and hence leaves some which do not support this in sw wkup state preventing low power transitions. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21OMAP4: PM: Use the low-power state change feature on OMAP4Rajendra Nayak
For pwrdm's which support LOWPOWERSTATECHANGE, do not try waking up the domain to put it back to deeper sleep state. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21OMAP2+: powerdomain: move header file from plat-omap to mach-omap2Paul Walmsley
The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-21OMAP2+: clockdomain: move header file from plat-omap to mach-omap2Paul Walmsley
The OMAP clockdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/clockdomain.h to mach-omap2/clockdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access clockdomain code and data directly. DSPBridge also uses the clockdomain headers for some reason, so, modify it also. The DSPBridge code should not be including the clockdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>