summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/Kconfig
AgeCommit message (Collapse)Author
2010-08-05[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27xMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/palm: Introduce Palm27xMarek Vasut
This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa: removing dead CORGI_SSP_DEPRECATEDChristoph Egger
CORGI_SSP_DEPRECATED doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: PXA_SHARPSL_DETECT_MACH_ID to include head-sharpsl.SEric Miao
With kexec-based kernel boot loader on Zaurus, the machine ID is actually correctly passed, and head-sharpsl.S is not necessary. Introduce PXA_SHARPSL_DETECT_MACH_ID, and include head-sharpsl.S only when that's explicitly enabled. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: move hidden Kconfig options to right place and vice versaEric Miao
1. TOSA related un-hidden options moved to right under MACH_TOSA 2. SHARPSL_PM related hidden options moved to the end of Kconfig Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18[ARM] pxa/income: Add Income SBC supportMarek Vasut
This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak. [daniel - rebased the code to follow the module/board split] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Pavel Revak <palo@bielyvlk.sk> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18[ARM] pxa/colibri270: Split module and base board codeDaniel Mack
Follow the idea of several MX31 based boards and split code that is related to the module from code that is baseboard specific. This makes adding new base board support easier, while avoiding code duplication. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/vpac270: add ide supportMarek Vasut
This patch adds support for the on-board IDE channel. I tested this with a CDROM connected over 2.5-3.5 IDE reduction with external power supplied to the CDROM. This was not tested with the Voipac 270-HDD-000 (official Voipac HDD module), but I expect no problems. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add basic support for Voipac PXA270 SBCMarek
This patch adds basic support for the Voipac PXA270 SBC. The device consists of the following hardware: - PXA270 @ 520 MHz - 256MB RAM (sparsemem, 2*128MB regions) - 64MB NOR flash - 640x480 LCD - Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add basic support for the Aeronix Zipit Z2 handheldMarek Vasut
This patch adds support for the Zipit Z2. The parts missing from this patch are the battery support, SPI driver for the LCD and support for the Silicon Serial ID chip. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to mach/KconfigEric Miao
Tosa is now able to use generic matrix keypad driver instead of the deprecated tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful. Move it to mach/Kconfig. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove incorrect select PXA_SSP in KconfigEric Miao
PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select' from Kconfig and make SOC_PXA_SSP to select. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: move ssp into common plat-pxaHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove the now legacy SSP APIEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.cEric Miao
The only use of corgi_ssp.c is corgi_ts.c, which is now deprecated and removed. Remove corgi_ssp.c and corgi_lcd.c and their relevant function declarations and data structures. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz>
2010-03-22[ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pmEric Miao
sharpsl_pm.c actually depends on max1111 driver being built-in when not using legacy ssp code. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] pxa: remove unnecessary 'select FB_W100' from some platformsEric Miao
Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP APIEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: add support for Embedian MXM-8x10Edwin Peer
Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: remove unused IRQs and avoid unnecessary cascadeEric Miao
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*. IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as IRQ_LOCOMO_KEY. IRQ_LOCOMO_GPIO and the demultiplex handler should really be living somewhere else. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-27Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into ↵Russell King
devel-stable
2009-12-29[ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310Marek Vasut
This has to be selected, otherwise some peripherals don't get initialized. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-18[ARM] pxa/raumfeld: add platform supportDaniel Mack
This adds support for Raumfeld's 'Controller', 'Connector', 'Speaker S' and 'Speaker M' devices. They're all based on PXA303 SoCs. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-16[ARM] pxa/cm-x300: add PWM backlight supportIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-16revert "[ARM] pxa/cm-x300: add PWM backlight support"Eric Miao
Commit db205463fd24c0972ad2c4e4fafb1c76e51b4380 was incorrectly applied, and reverted here to re-apply. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13[ARM] pxa/zeus: make Viper pcmcia support more generic to support ZeusMarc Zyngier
The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13[ARM] pxa/zeus: basic support for Arcom Zeus SBCMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add PWM backlight supportIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: make CPU_PXA* to be selectable hidden optionsEric Miao
CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: select CPU_PXA310 for MACH_COLIBRI300Eric Miao
MACH_COLIBRI300 is supposed to support both PXA300 and PXA310, select the missing CPU_PXA310. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de>
2009-12-01[ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removingEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: re-order platforms in Kconfig and MakefileEric Miao
Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/treo: add Palm Centro 685 supportTomáš Čech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/treo: generalisation of Treo680 codeTomáš Čech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: balloon3 (http://balloonboard.org/) base machine supportJonathan McDowell
So, again against latest pxa-linux-2.6/devel, with the following changes: * Move to __raw_readl/__raw_writel for FPGA/CPLD register access * Change Toppoly LCD config to be selectable at run time rather than compile time. * Remove currently unused irq device suspend/resume functions. * Strip out unnecessary/duplicated #includes. * Some code style cleanups. Balloon3 (http://balloonboard.org/) base machine support Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add support for the IskraTel XCEP boardMatej Kenda
Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Matej Kenda <matej.kenda@i-tech.si> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: Palm Tungsten|C initial supportMarek Vasut
This patch adds basic support for Palm Tungsten|C handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/ezx: set IRQ_BOARD_END for EZXDaniel Ribeiro
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add cpu_is_pxa950() and Kconfig optionsHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/treo680: initial supportTomas 'Sleep_Walker' Cech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specificDmitry Eremin-Solenikov
collie_pm was the only non-PXA user of sharpsl_pm. Now as it's gone we can merge code into one single file to allow further cleanup. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: Stargate 2 board supportJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add basic support for HP iPAQ hx4700 PDAsPhilipp Zabel
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use itPhilipp Zabel
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: build pwm.c according to HAVE_PWM instead of PXA_PWMEric Miao
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-03[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930".Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-04[ARM] pxa: Palm Tungsten E2 basic supportMarek Vasut
This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Colibri PXA320 module basicsDaniel Mack
This adds basic support for Colibri PXA320 modules. The file colibri-320.c only contains settings specific to this module, such as the Ethernet interface. Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Refactor Colibri board support codeDaniel Mack
- Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack
This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 06:52:32 +0000