summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/Makefile
AgeCommit message (Collapse)Author
2009-12-13[ARM] pxa/zeus: basic support for Arcom Zeus SBCMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removingEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: re-order platforms in Kconfig and MakefileEric Miao
Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/treo: generalisation of Treo680 codeTomáš Čech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: balloon3 (http://balloonboard.org/) base machine supportJonathan McDowell
So, again against latest pxa-linux-2.6/devel, with the following changes: * Move to __raw_readl/__raw_writel for FPGA/CPLD register access * Change Toppoly LCD config to be selectable at run time rather than compile time. * Remove currently unused irq device suspend/resume functions. * Strip out unnecessary/duplicated #includes. * Some code style cleanups. Balloon3 (http://balloonboard.org/) base machine support Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add support for the IskraTel XCEP boardMatej Kenda
Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Matej Kenda <matej.kenda@i-tech.si> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: Palm Tungsten|C initial supportMarek Vasut
This patch adds basic support for Palm Tungsten|C handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/treo680: initial supportTomas 'Sleep_Walker' Cech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: Stargate 2 board supportJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add basic support for HP iPAQ hx4700 PDAsPhilipp Zabel
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: move pwm.c to common plat-pxa directoryEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: build pwm.c according to HAVE_PWM instead of PXA_PWMEric Miao
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa: Palm Tungsten E2 basic supportMarek Vasut
This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: move common GPIO handling code into plat-pxaEric Miao
1. add common GPIO handling code into [arch/arm/plat-pxa] 2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors should implement its own <mach/gpio.h>, provide the following required definitions and '#include <plat/gpio.h>' in the end: - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory - macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance) - NR_BUILTIN_GPIO for the number of onchip GPIO - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: introduce plat-pxa for PXA common code and add DMA supportEric Miao
1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families 2. initially moved DMA code into plat-pxa 3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors should implement its own <mach/dma.h>, provide the following required definitions and '#include <plat/dma.h>' in the end: - DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Colibri PXA320 module basicsDaniel Mack
This adds basic support for Colibri PXA320 modules. The file colibri-320.c only contains settings specific to this module, such as the Ethernet interface. Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Refactor Colibri board support codeDaniel Mack
- Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack
This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: rename colibri.c to colibri-pxa270.cDaniel Mack
Namespace cleanup: rename colibri.c to colibri-pxa270.c and change some names in colibri.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add support for CSB701 baseboardDmitry Eremin-Solenikov
CSB701 is one of baseboards that can be used with CSB726 SOM. This currently adds support for button and LED on the board. More to come later. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add initial support for Cogent CSB726 boardDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-10[ARM] 5355/1: Adding support for the HTC Himalaya and its framebufferZbynek Michl
Patch adds support for the HTC Himalaya device. It includes hardware definitions and w100fb support. Signed-off-by: Zbynek Michl <Zbynek.Michl@seznam.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-10[ARM] 5354/1: mach-pxa: add AM300 platform driver v3Jaya Kumar
This patch adds support for the AM300 platform driver which uses the E-Ink broadsheetfb display driver. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-21[ARM] pxa: PalmLD initial supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa: PalmT5 initial supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa: initial support for the Imote2 platformJonathan Cameron
Changes made as suggested by Eric Miao (including fix to map_io silly mistake!). Originally designed by Intel, now sold by Crossbow (www.xbow.com). Very little actually on board. The patch includes sensors and similar as found on commonly occurring daughter boards. Some of the drivers are not in mainline as yet as they are either part of the IIO subsystem or need a lot of work before submission. What is the position wrt to putting them in i2c board configs etc? Support for these boards has been maintained outside the kernel for a long time, but now that there is a good da9030 pmic driver available the last major hurdle no longer exists. All comments welcomed. The Imote2's big brother (stargate2) will follow once any problems with this one have been cleaned up and a few bits and bobs have been added to the da903x driver. Hopefully the cc2420 driver will get cleaned up and submitted in the not too distant future as well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/gumstix: fix incorrect init done by am200Jaya Kumar
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: add basic support for HP iPAQ h5000Anton Vorontsov
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions. Kernel will able to boot, work via serial console, mount filesystems placed on flashes and run USB gadgets (g_ether by default). Other device drivers (frame buffer, LCD, touchscreen, backlight, bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ SoCs/MFDs, drivers to which will be submitted too, after massive cleanups. This machine will be used as "real user" for these new drivers. This is an updated version of the patch, which contains fixes proposed on linux-arm-kernel mailing list. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfigEric Miao
Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-07[ARM] pxa: add preliminary CPUFREQ support for PXA3xxEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branch 'viper-for-rmk' of git://www.misterjones.org/linux-2.6-armRussell King
Merge branch 'pxa-viper' into pxa-machines Conflicts: arch/arm/mach-pxa/Makefile drivers/pcmcia/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-trizeps' into pxa-machinesRussell King
Conflicts: drivers/pcmcia/Makefile
2008-10-07Merge branches 'metronomefb', 'pxa-cm2xx', 'pxa-gumstix', 'pxa-misc', ↵Russell King
'pxa-mitac', 'pxa-mp900', 'pxa-zylonite' and 'pxa-zaurus' into pxa-machines Conflicts: arch/arm/mach-pxa/poodle.c
2008-10-07[ARM] 5282/1: pxa: add CM-X255 supportMike Rapoport
Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] 5281/1: pxa: split cm-x2xx.c to cm-x2xx.c and cm-x270.cMike Rapoport
Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] 5286/2: pxa: rename cm-x270* to cm-x2xx* to allow addition of cm-x255 ↵Mike Rapoport
support Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02[ARM] 5277/1: Add basic support for MobilePro 900/cKristoffer Ericson
This patch adds basic support for the Mobilepro 900/c mini-laptop. At present it won't do much more than build and boot. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01[ARM] 5251/1: remove old LED support for Trizeps4 SOMJürgen Schindele
Remove the old led support in arch/arm/mach-pxa/leds... for TRIZEPS4 SOM. It is / will be replaced by generic led driver drivers/leds/... Signed-off-by: Jürgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26[ARM] 5238/2: Very basic Palm Zire 72 supportSergey Lapin
This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/akita: use pca953x instead of akita-ioexpEric Miao
Use generic pca953x which provides gpiolib interface instead of akita-specific akita-ioexp with non-standard interface to pins. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/spitz: use SPI-based driver for ads7846, corgi-lcd and max1111Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/corgi: use SPI-based driver for ads7846, corgi-lcd and max1111Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/poodle: use SPI based ads7846 touch screen driverEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09Basic support for the Arcom/Eurotech Viper SBC.Marc Zyngier
Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-08-26[ARM] 5215/2: Add support for CM-X300 boardMike Rapoport
This patch adds core support for CM-X300 board based on PXA300 processor Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support.Robert Jarzmik
The Mio A701 support features : - GSM support - Bluetooth support - GPS support - LED/Vibrator support - Suspend/Resume support (very dependant on Mio FlashRam) - Screen/Backlight support - Keys/Keyboard support - USB udc support - MMC/SDIO support - Flash Memory support - Battery/AC plugin support Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26[ARM] 5200/1: am200epd: use fb notifiers and gpio apiJaya Kumar
The original am200epd driver was designed with bad assumptions. It manipulated GPSR/GPLR registers directly. It relied on direct access to the pxa LCDC registers which have since conflicted with commit ce4fb7b892a6d6c6a0f87366b26fd834d2923dd7 . This patch moves it into mach-pxa and overhauls it to use a fb obtained through fb notifiers. It now uses the generic GPIO api. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-13[ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR)Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 07:21:14 +0000