summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/colibri-pxa300.c
AgeCommit message (Collapse)Author
2011-02-09ARM: pxa/colibri: use correct SD detect pinBjørn Forsman
The use of wrong SD detect pin was introduced by this commit: ARM: pxa: Push Colibri evalboard MFP into module files This fixes it. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa/colibri: setup pins for USB host port 3Bjorn Forsman
Tested on a Colibri Evaluation Board Rev.2.1 with a Colibri PXA310 module. Signed-off-by: Bjorn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-12-20ARM: pxa: Rename Colibri evalboardMarek Vasut
Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with all Colibri modules. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Add M41T00 RTC support into Colibri evalboardMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Push Colibri evalboard MFP into module filesMarek Vasut
This change -- pushing the MFP configuration back into Module files -- is necessary because some evalboards can be used with multiple modules, where MFP differs from module to module. Therefore MFP isn't board-specific, but module-specific and the module should preconfigure itself for the board. (And there is also the C preprocesor limitation and conflicting #define-s) Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()Marek Vasut
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA25x/PXA27x and PXA3xx memory mapping. Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io() and pxa3xx_map_io() is included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-07-13[ARM] pxa/colibri-pxa300: fix AC97 initpieterg
The wrong CONFIG defines were checked, and the <mach/audio.h> include was missing Signed-off-by: pieter <p.grimmerink@inepro.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: allow platforms to control which uarts are registeredRussell King
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boardsDaniel Mack
NAND feature will be enabled when the appropriate config option is set. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-04-04[ARM] pxa/colibri: get rid of set_irq_type()Daniel Mack
In commit 47cb035560a41bd1bd3db506eeab93088815203e, the ax88796 driver learned to take IRQ flags from platform_device definition. Use that here to get rid of the set_irq_type() hack. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa/colibri: provide MAC address from ATAG_SERIALDaniel Mack
In 67fca028f1535e510689d2e444b0289e264e05c1, the ax88796 ethernet driver learned a way to let the platform data hand in the MAC address. Use it here as the original Colibri bootloader passes in a MAC address via ATAG_SERIAL. Reported-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-28[ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pinsDaniel Mack
Reported-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: AC97 pin functions for Colibri PXA310/320Daniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Add Colibri LCD functionsDaniel Mack
This adds LCD functions for Colibri PXA300 and Colibri PXA320 and configures a LQ043T3DX02 panel. Original-code-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Refactor Colibri board support codeDaniel Mack
- Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Fix Colibri AX88796 configurationDaniel Mack
Broaden the AX88796 register mask to allow access to the reset register. Remove unnecessary value definitions and the second resource block. Diagnosed-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add USB support for Colibri PXA300Daniel Mack
This adds support for USB OHCI for Toradex' Colibri PXA300 modules as connected on the evaluation board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add MMC support for Colibri PXA300Daniel Mack
Added MMC support for Toradex' Colibri PXA300 module. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack
This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>