summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-realview
AgeCommit message (Collapse)Author
2011-10-25Merge branch 'misc' into for-linusRussell King
Conflicts: arch/arm/mach-integrator/integrator_ap.c
2011-10-20ARM: smp: fix clipping of number of CPUsRussell King
Rather than clipping the number of CPUs using the compile-time NR_CPUS constant, use the runtime nr_cpu_ids value instead. This allows the nr_cpus command line option to work as expected. Cc: <stable@kernel.org> Reported-by: Mark Salter <msalter@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_romLinus Walleij
This exposes the PB1176 ROM if you compile in the MTD physmap mapping and also the map_rom chiptype. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: platform fixups: remove mdesc argument to fixup functionRussell King
Get rid of the mdesc pointer in the fixup function call. No one uses the mdesc pointer, it shouldn't be modified anyway, and we can't wrap it, so let's remove it. Platform files found by: $ regexp=$(git grep -h '\.fixup.*=' arch/arm | sed 's!.*= *\([^,]*\),* *!\1!' | sort -u | tr '\n' '|' | sed 's,|$,,;s,|,\\|,g') $ git grep $regexp arch/arm Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7022/1: allow to detect conflicting zreladdrsSascha Hauer
Boards used to specify zreladdr in their Makefile.boot with zreladdr-y := x, so conflicting zreladdrs were silently overwritten. This patch changes this to zreladdr-y += x, so that we end up with multiple words in zreladdr in such a case. We can detect this later and complain if necessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12ARM: realview: ensure visibility of writes during resetWill Deacon
The various reset routines in mach-realview rely on an FPGA to power-cycle the board after writing some magic runes to memory-mapped registers. This patch adds a dsb() following the writes, so that they become visible before we mdelay(1000) in the arch_reset code. Without this patch, the timeout would expire sporadically, causing the reset to fail. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-22Merge branch 'devel-stable' into for-nextRussell King
Conflicts: arch/arm/kernel/entry-armv.S
2011-07-18ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-07ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus=1Stephen Boyd
If an ARM system has multiple cpus in the same socket and the kernel is booted with maxcpus=1, secondary cpus are possible but not present due to how platform_smp_prepare_cpus() is called. Since most typical ARM processors don't actually support physical hotplug, initialize the present map to be equal to the possible map in generic ARM SMP code. Also, always call platform_smp_prepare_cpus() as long as max_cpus is non-zero (0 means no SMP) to allow platform code to do any SMP setup. After applying this patch it's possible to boot an ARM system with maxcpus=1 on the command line and then hotplug in secondary cpus via sysfs. This is more in line with how x86 does things. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: 6986/1: mach-realview: add TCM support for PB1176Linus Walleij
Enable TCM support on the RealView PB1176 - we have now taken the precautions necessary to support even multi-board builds of RealView systems with TCM enabled. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23clockevents: ARM sp804: allow clockevent name to be specifiedRussell King
This allows platforms to specify the clcokevent name upon registration. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: obtain sp804 timer rate via clksRussell King
This allows platforms to specify the rate of the SP804 clocksource via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: allow clocksource name to be specifiedRussell King
This allows platforms to specify the clocksource name upon registration, which is necessary should they wish to register more than one sp804 clocksource. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: consolidate SMP cross call implementationRussell King
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a ↵Marc Zyngier
map_info The set_vpp() method provided by physmap passes a map_info back to the platform code, which has little relevance as far as the platform is concerned (this parameter is completely unused). Instead, pass the platform_device, which can be used in the pismo driver to retrieve some important information in a nicer way, instead of the hack that was in place. The empty set_vpp function in board-at572d940hf_ek.c is left untouched, as the board/SoC is scheduled for removal. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6903/1: Realview: Use physmap driver instead of integrator-flashMarc Zyngier
Tested on a PB11-MPCore. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accessesCatalin Marinas
Since mandatory barriers may be used (explicitly or implicitly via readl etc.) to ensure the ordering between Device and Normal memory accesses, a DMB is not enough. This patch converts it to a DSB. Cc: Colin Cross <ccross@android.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizesRussell King
Rather than each platform providing its own function to adjust the zone sizes, use the new ARM_DMA_ZONE_SIZE definition to perform this adjustment. This ensures that the actual DMA zone size and the ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS definitions are consistent with each other, and moves this complexity out of the platform code. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESSRussell King
The values of ISA_DMA_THRESHOLD and MAX_DMA_ADDRESS are related; one is the physical/bus address, the other is the virtual address. Both need to be kept in step, so rather than having platforms define both, allow them to define a single macro which sets both of these macros appropraitely. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-26ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tilePawel Moll
The second GIC, present when EB board is used with a MPCore tile, was initialised starting with irq number 64, which made interrupts 64-95 in the primary GIC unusable. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-20Merge branches 'fixes', 'pgt-next' and 'versatile' into develRussell King
2011-03-16Merge branch 'p2v' into develRussell King
Conflicts: arch/arm/kernel/module.c arch/arm/mach-s5pv210/sleep.S
2011-02-19ARM: realview/vexpress: consolidate SMP bringup codeRussell King
Realview and Versatile Express share the same SMP bringup code, so consolidate the two implementations. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: realview/vexpress: consolidate localtimer supportRussell King
Realview and Versatile Express local timer support is identical, so consolidate the implementations. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: realview: remove old AMBA device DMA definitionsRussell King
The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA support makes no use of them either, so they can be removed. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: realview: use new init_early for clock tree and sched_clock initRussell King
Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: realview: switch Realview to use consolidated CLCDRussell King
This switches Realview platforms to use the consolidated CLCD panel support, including the display capabilities. As Realview uses a PL111, it can support the full range of pixel formats - 444, 5551, 565 in both RGB and BGR mode. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17ARM: P2V: avoid initializers and assembly using PHYS_OFFSETRussell King
As PHYS_OFFSET will be becoming a variable, we can't have it used in initializers nor assembly code. Replace those in generic code with a run-time initialization. Replace those in platform code using the individual platform specific PLAT_PHYS_OFFSET. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-02ARM: v6k: Realview EB 11MPCore and PB11MPCore use V6K architecture CPUsRussell King
Make Realview EB ARM11MPCore and PB11MPCore select the new V6K CPU option. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25ARM: realview: name configuration options after actual board namesRussell King
As no one seems to really know which configuration options tie up with which boards, I thought I'd do some investigation and try to work it out. After discussion with some folk in linaro, I think I have this nailed. The names are updated to use the name on the front of the appropriate board user guide for the various baseboards, which I've taken to be the official name for each board. I haven't significantly updated the descriptions for the tiles as that is even less clear - as far as I can see on ARMs website, there is no Cortex-A9 tile for Realview EB - only ARM11MPCore, ARM1156T2F-S, ARM1176TZF-S and Cortex-R4F. So exactly what this 'Multicore Cortex-A9 Tile' is... Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25ARM: realview,vexpress: fix section mismatch warning for pen_releaseRussell King
Fix two section mismatch warnings in the platform SMP bringup code for Realview and Versatile Express: WARNING: arch/arm/mach-realview/built-in.o(.text+0x8ac): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release The function write_pen_release() references the variable __cpuinitdata pen_release. This is often because write_pen_release lacks a __cpuinitdata annotation or the annotation of pen_release is wrong. WARNING: arch/arm/mach-vexpress/built-in.o(.text+0x7b4): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release The function write_pen_release() references the variable __cpuinitdata pen_release. This is often because write_pen_release lacks a __cpuinitdata annotation or the annotation of pen_release is wrong. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-06Merge branch 'misc' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2011-01-06Merge branch 'smp' into miscRussell King
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/mm/ioremap.c
2011-01-05Merge branch 'clksrc' into develRussell King
Conflicts: arch/arm/mach-vexpress/v2m.c arch/arm/plat-omap/counter_32k.c arch/arm/plat-versatile/Makefile
2011-01-05Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and ↵Russell King
'versatile' into devel
2010-12-22ARM: versatile: convert sched_clock() to use new infrastructureRussell King
Convert versatile platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: fix hard-coded control register constantsRussell King
Use the definition we've provided in asm/system.h rather than numeric constants. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: fix reporting of spurious wakeupsRussell King
The original scheme for reporting spurious wakeups was broken - it tried to use printk() from a context which wasn't coherent with the other CPUs, which risks corrupting the printk() data. Fix this by noting the number spurious wakeups, and only report them when we are properly woken - when we will be coherent with the rest of the system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: Fix subtle race in CPU pen_release hotplug codeRussell King
There is a subtle race in the CPU hotplug code, where a CPU which has been offlined can online itself before being requested, which results in things going astray on the next online/offline cycle. What happens in the normal online/offline/online cycle is: CPU0 CPU3 requests boot of CPU3 pen_release = 3 flush cache line checks pen_release, reads 3 starts boot pen_release = -1 ... requests CPU3 offline ... ... dies ... checks pen_release, reads -1 requests boot of CPU3 pen_release = 3 flush cache line checks pen_release, reads 3 starts boot pen_release = -1 However, as the write of -1 of pen_release is not fully flushed back to memory, and the checking of pen_release is done with caches disabled, this allows CPU3 the opportunity to read the old value of pen_release: CPU0 CPU3 requests boot of CPU3 pen_release = 3 flush cache line checks pen_release, reads 3 starts boot pen_release = -1 ... requests CPU3 offline ... ... dies ... checks pen_release, reads 3 starts boot pen_release = -1 requests boot of CPU3 pen_release = 3 flush cache line Fix this by grouping the write of pen_release along with its cache line flushing code to ensure that any update to pen_release is always pushed out to physical memory. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: remove smp_mpidr.hRussell King
With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we now do not use hard_smp_processor_id(), we no longer need to read the hardware processor ID. Remove the include providing this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: remove bug checks in platform_cpu_die()Russell King
platform_cpu_die() is entered from the CPU's own idle thread, which can not be migrated to other CPUs. Moreover, the 'cpu' argument comes from the thread info, which will always be the 'current' CPU. So remove this useless bug check. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: move cpu_killed completion to core codeRussell King
We always need to wait for the dying CPU to reach a safe state before taking it down, irrespective of the requirements of the platform. Move the completion code into the ARM SMP hotplug code rather than having each platform re-implement this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: consolidate trace_hardirqs_off() into common SMP codeRussell King
All platforms call trace_hardirqs_off() in their secondary startup code, so move this into the core SMP code - it doesn't need to be in the per-platform code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: consolidate the common parts of smp_prepare_cpus()Russell King
There is a certain amount of smp_prepare_cpus() which doesn't belong in the platform support code - that is, code which is invariant to the SMP implementation. Move this code into arch/arm/kernel/smp.c, and add a platform_ prefix to the original function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: get rid of references to poke_milo and MiloRussell King
Milo is an old boot loader, which is no longer relevant for these platforms. References to it are misleading. Move the code out of poke_milo(), and remove references to milo in comments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: get rid of get_core_count()Russell King
We don't need this small function as well as scu_get_core_count() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: Clean up ncores sanity checksRussell King
scu_get_core_count() never returns zero cores, so we don't need to check and correct if ncores is zero. Tegra was missing the check against NR_CPUS, leading to a potential bitfield overflow if this becomes the case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: move CPU number sanity checks to smp_init_cpus()Russell King
Ensure that the number of CPUs is sanity checked before setting the number of possible CPUs. This avoids any chance of overflowing the cpu_possible bitmap. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 00:05:22 +0000