summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-rpc
AgeCommit message (Collapse)Author
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-13Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
Conflicts: arch/arm/mach-at91/gpio.c
2009-02-24Add i2c_board_info for RiscPC PCF8583Russell King
Add the necessary i2c_board_info structure to fix the lack of PCF8583 RTC on RiscPC. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
2009-02-21Merge branch 'dma' into develRussell King
Conflicts: arch/arm/plat-mxc/dma-mx1-mx2.c
2009-02-21[ARM] dma: RiscPC: don't modify DMA SG entriesRussell King
We should not be modifying the scatterlist passed to us from the driver code; doing so breaks assumptions made by the DMA API code, and could cause problems if the driver retries a transfer using an old scatterlist. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-21[ARM] dma: move IOMD and floppy DMA structures to RiscPC DMA codeRussell King
There's no point these being in a generic include file when they're only used in arch/arm/mach-rpc/dma.c. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-11[ARM] dma: Use sensible DMA parameters for Acorn driversRussell King
The hardware supports transfers up to a page boundary per buffer. Currently, we work around that in the DMA code by splitting each buffer up as we run through the scatterlist. Avoid this by telling the block layers about the hardware restriction. Eventually, this will allow us to phase out the splitting code, but not until the old IDE layer allows us to control the value it gives to blk_queue_segment_boundary(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-11[ARM] dma: convert IOMD DMA to use sg_next()Russell King
... rather than incrementing the sg pointer. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-11[ARM] dma: move RiscPC specific DMA data out of dma_structRussell King
Separate the RiscPC specific (IOMD and floppy FIQ) data out of the core DMA structure by making the IOMD and floppy DMA supersets. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-11[ARM] dma: rejig DMA initializationRussell King
Rather than having the central DMA multiplexer call the architecture specific DMA initialization function, have each architecture DMA initialization function use core_initcall(), and register each DMA channel separately with the multiplexer. This removes the array of dma structures in the central multiplexer, replacing it with an array of pointers instead; this is more flexible since it allows the drivers to wrap the DMA structure (eventually allowing us to transition non-ISA DMA drivers away.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-08[ARM] dma: remove dmach_t typedefRussell King
Remove a pointless integer typedef. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] give RiscPC a NR_IRQS definition and remove defaultRussell King
RiscPC is the only platform using the default setting for NR_IRQS, so the default NR_IRQS doesn't really make sense; remove it and make RiscPC provide such a definition. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Rename ISA mach/dma.h header to mach/isa-dma.hRussell King
This avoids confusion with platform specific DMA implementations in mach/dma.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] move MAX_DMA_ADDRESS to mach/memory.hRussell King
Move the definition of MAX_DMA_ADDRESS from mach/dma.h to mach/memory.h, thereby placing it along side its relative, ISA_DMA_THRESHOLD. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] rpc: remove obsolete IO accessorsRussell King
Remove __arch_base_xxx() and __ioaddrc() macros; they're obsolete and unused. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] remove a common set of __virt_to_bus definitionsNicolas Pitre
Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01[ARM] mm: enable sparsemem on clps7500 and RiscPCRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-06Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-07-20[ARM] rpc: convert an outb() to writeb()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03[ARM] Add platform support for PATA on RiscPCRussell King
Add pata_platform device for RiscPC, thereby converting the primary IDE channel on the machine to PATA. Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Remove compatibility layer for ARM irqsRussell King
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[ARM] Remove '__address' from scatterlist and convert to DMA APIRussell King
The old __address element in struct scatterlist remained from older kernels because the ARM DMA emulation code made use of it. Move this field into struct dma_struct, and convert DMA emulation code to setup a SG entry as required. Also, convert DMA emulation code to use the new DMA API rather than the PCI DMA API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2989/1: Replace map_desc.physical with map_desc.pfn: RiscPCDeepak Saxena
Patch from Deepak Saxena RiscPC map_desc.pfn conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08[SERIAL] Use an enum for serial8250 platform device IDsRussell King
Rather than hard-coding the platform device IDs, enumerate them. We don't particularly care about the actual ID we get, just as long as they're unique. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03[PATCH] ARM: Remove machine description macrosRussell King
Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-22[PATCH] ARM: Allow riscpc to parse "acorn" boot info tagRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!