summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2416
AgeCommit message (Collapse)Author
2012-01-05ARM: 7254/1: restart: S3C24XX: move SWRST based S3C platforms toHeiko Stuebner
S3C2412/S3C2416/S3C2443 use a special register to signal the reset to the processor and used therefore the s3c24xx_reset_hook mechanism in the s3c24xx-specific arch reset. This patch introduces restart functions for these architectures, moves the board files to them and removes the s3c24xx_reset_hook infrastructure, as all users are gone. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
2011-11-05Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
2011-11-01Merge branch 'depends/rmk/memory_h' into next/cleanup2Arnd Bergmann
There are lots of conflicts between the omap and exynos cleanups and the memory.h remove series. Conflicts: arch/arm/mach-exynos4/mach-smdkc210.c arch/arm/mach-exynos4/mach-smdkv310.c arch/arm/mach-imx/mach-cpuimx27.c arch/arm/mach-omap1/board-ams-delta.c arch/arm/mach-omap1/board-generic.c arch/arm/mach-omap1/board-h2.c arch/arm/mach-omap1/board-h3.c arch/arm/mach-omap1/board-nokia770.c arch/arm/mach-omap1/board-osk.c arch/arm/mach-omap1/board-palmte.c arch/arm/mach-omap1/board-palmtt.c arch/arm/mach-omap1/board-palmz71.c arch/arm/mach-omap1/board-sx1.c arch/arm/mach-omap1/board-voiceblue.c arch/arm/mach-omap1/io.c arch/arm/mach-omap2/board-generic.c arch/arm/mach-omap2/io.c arch/arm/plat-omap/io.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-30Merge branch 'pxa/devel' into next/devel2Arnd Bergmann
Conflicts: arch/arm/mach-s3c2416/s3c2416.c
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-22ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PMDomenico Andreoli
v2: - register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be conditionally compiled out, it is already optimized out on !CONFIG_PM - fix also s3c2412 and s3c2416 affected by the same build issue v1: s3c2440.c fails to build if !CONFIG_PM because in such case s3c2410_pm_syscore_ops is not defined. Same error should happen also in s3c2410.c and s3c2442.c Signed-off-by: Domenico Andreoli <cavokz@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocksHeiko Stuebner
Previously the fclk rate was calculated by dividing the pll through the divider value of the armdiv. With a real armdiv clk in place it's possible to simply read its value, which does essentially the same. This change makes the whole fdiv_fn function pointers supplied to s3c2443_common_init_clocks and s3c2443_common_setup_clocks obsolete, so remove it too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: S3C2416: Add comment describing the armdiv/armclkHeiko St?bner
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: S3C24XX: Add infrastructure to transmit armdiv to common codeHeiko Stuebner
This is needed for making the armdiv clock common to S3C2443 and S3C2416/2450. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: S3C2416: Add armdiv_mask constantHeiko Stuebner
The S3C2416/2450 has only 3 bits for the armdiv setting instead of the 4 bits of the S3C2443. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450Heiko Stuebner
The ADC of the S3C2416/2450 SoC is 10 or 12 bit wide, has its source selection in the register base+0x18 and its width selection in bit 03 of the ADCCON register. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04Merge branch 'next-samsung-cleanup-2' into next-samsung-devel-2Kukjin Kim
Conflicts: arch/arm/plat-s5p/include/plat/pll.h
2011-10-04ARM: SAMSUNG: Consolidate plat/pll.hKukjin Kim
Removed - arch/arm/plat-s3c24xx/include/plat/pll.h - arch/arm/mach-s3c64xx/include/mach/pll.h - arch/arm/plat-s5p/include/plat/pll.h - arch/arm/plat-samsung/include/plat/pll6553x.h And created - arch/arm/plat-samsung/include/plat/pll.h Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: changed title] [kgene.kim@samsung.com: fixed conflicts in plat-s5p/include/pll.h] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: SAMSUNG: remove sdhci default configuration setup platform helperThomas Abraham
The sdhci platform helper function that sets up the default controller configuration is removed for all Samsung platforms since such default controller configuration can be handled by the driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S3C2416: Add HSSPI clock sourced from EPLLHeiko Stuebner
This clock is special to the S3C2416/2450 SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-21ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIGsKukjin Kim
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-21ARM: SAMSUNG: Update the name of regarding Samsung GPIOKukjin Kim
According to gpio-samsung.c, this patch updates the name of regarding Samsung GPIO. Basically the samsung_xxx prefix is used in gpio-samsung.c instead of s3c_xxx, because unified name can reduce its complexity. Note: some s3c_xxx stil remains because it is used widely. It will be updated next time. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-21ARM: mach-s3c24*: convert boot_params to atag_offsetNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-25Merge branch 'next/cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits) ARM: EXYNOS4: Change devname for FIMD clkdev ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210 ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100 ARM: S3C24XX: Use generic s3c_set_platdata for devices ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND ARM: SAMSUNG: Use generic s3c_set_platdata for NAND ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON ARM: SAMSUNG: Use generic s3c_set_platdata for FB ARM: SAMSUNG: Use generic s3c_set_platdata for TS ARM: S3C64XX: Add PWM backlight support on SMDK6410 ARM: S5P64X0: Add PWM backlight support on SMDK6450 ARM: S5P64X0: Add PWM backlight support on SMDK6440 ARM: S5PC100: Add PWM backlight support on SMDKC100 ARM: S5PV210: Add PWM backlight support on SMDKV210 ARM: EXYNOS4: Add PWM backlight support on SMDKC210 ARM: EXYNOS4: Add PWM backlight support on SMDKV310 ARM: SAMSUNG: Create a common infrastructure for PWM backlight support clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0 ... Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
2011-07-20ARM: S3C24XX: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-02ARM: pm: allow suspend finisher to return error codesRussell King
There are SoCs where attempting to enter a low power state is ignored, and the CPU continues executing instructions with all state preserved. It is over-complex at that point to disable the MMU just to call the resume path. Instead, allow the suspend finisher to return error codes to abort suspend in this circumstance, where the cpu_suspend internals will then unwind the saved state on the stack. Also omit the tlb flush as no changes to the page tables will have happened. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24ARM: pm: samsung: no need to call flush_cache_all()Russell King
The core suspend code calls flush_cache_all() immediately prior to calling the suspend finisher function, so remove these needless calls from the finisher functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24ARM: pm: samsung: move cpu_suspend into C codeRussell King
Move the call to cpu_suspend into C code, and noticing that all the s3c_cpu_save implementations are now identical, we can move this into the common samsung code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
2011-05-10ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controllerThomas Abraham
Add support for USB 2.0 High-Speed gadget controller driver for Samsung's S3C2416 processor. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-24ARM / Samsung: Use struct syscore_ops for "core" power managementRafael J. Wysocki
Replace sysdev classes and struct sys_device objects used for "core" power management by Samsung platforms with struct syscore_ops objects that are simpler. This generally reduces the code size and the kernel memory footprint. It also is necessary for removing sysdevs entirely from the kernel in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-06Merge branch 'next-s3c24xx' into for-nextKukjin Kim
2011-01-06ARM: S3C24XX: Add support UART3 for S3C2443 and S3C2416Abhilash Kesavan
Both S3C2443 and S3C2416 support 4 UART channels, this patch adds support for the missing uart channel. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-06ARM: S3C2416: Add support of SD/MMC card detect on SMDK2416Yauhen Kharuzhy
Enable card detect by GPIO pin on hsmmc1 device (SD0 on SMDK2416 board) and enable card polling on hsmmc0 (SD1). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-06ARM: S3C2416: Add platform helpers for setup SDHCIYauhen Kharuzhy
Samsung S3C2416 has two SDHCI controllers compatible with other Samsung's SoCs (S3C64XX, S5PC100 etc...). Add required platform setup code that the devices can be used with sdhci-s3c driver. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> [kgene.kim@samsung.com: change to __raw_{readl,writel} from {readl,writel}] [kgene.kim@samsung.com: build error fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-06ARM: S3C24XX: Add address map and clock definitions for HSMMC0Yauhen Kharuzhy
Define maps for HSMMC devices. S3C2443 has one HSMMC device with base address 0x4A800000. S3C2416 has HSMMC0 at 0x4AC00000 and HSMMC1 at 0x4A800000. So suppose that S3C2443 has only HSMMC1. Define clock for hsmmc0 device and register it. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-03ARM: S3C24XX: irq_data conversionLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> [kgene.kim@samsung.com: coding-style fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-17ARM S3C24XX: Fix compilation of PM code for S3C2416Yauhen Kharuzhy
S3C2416 PM code uses low-level sleep routines from S3C2412 code, but these routines are compiled only for S3C2412 SoC. Split S3C2412_PM to two parts: S3C2412_PM, S3C2412_PM_SLEEP and select last in S3C2416's Kconfig. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-30ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOSTYauhen Kharuzhy
Enable compilation of platform devices and initialization code used in SMDK2416 board file. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-11-25ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443Abhilash Kesavan
The UART3 submask should be 0x7 (SUBSRCPND[26:24]). Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-25ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416Abhilash Kesavan
IRQ_S3C2443_UART3 is being used as the base when it should actually be IRQ_S3C2443_RX3 on S3C2443 and S3C2416 for the UART3. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-28Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mach-s3c64xx/dev-audio.c
2010-10-20ARM: S3C2416: Add Power Management support for SMDK2416Abhilash Kesavan
Adds suspend-to-ram support for SMDK2416 based on existing 2412 PM code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-18ARM: S3C2416: Change S3C2416 NAND platform device nameAtul Dahiya
This patch changes the platform device name from 's3c2416-nand' to 's3c2412-nand' so that S3C2416 can reuse the nand functionality available on S3C2412. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: SAMSUNG: Add setname core function for S3C24XX NANDAtul Dahiya
This patch replaces the device name assignment method from string assignment to set_name method for all s3c24xx machines and adds device core file. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-11s3c-fb: add device name initializationPawel Osciak
Add framebuffer device name initialization calls for S3C2443, S3C64xx and S5P machines. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-18ARM: SMDK2416: Add support for framebuffer device and ensure correct setupBen Dooks
Add support for the LCD display on the SMDJK2416, and correctly name the framebuffer device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10ARM: SAMSUNG: Update S3C2416 entry with S3C2450Ben Dooks
These devices are so similar that they share the same SoC ID code, so note this. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10ARM: S3C2413: Update GPIO pull-up supportBen Dooks
Ensure the right get/set pull code is selected and assigned to the GPIO core. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10ARM: S3C2416: Use s3c2440 style i2c controllerBen Dooks
The s3c2416 i2c controllers are compatible with the s3c2440 style i2c block, so change the device name appropriately. Signed-off-by: Ben Dooks <ben-linux@fluff.org>y
2010-05-10ARM: S3C2416: Add support for OHCI on SMDK2416Ben Dooks
Add device definition and ensure that the host port is powered up at start time. Full power control can be added at a later date. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 04:43:50 +0000