summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2443
AgeCommit message (Collapse)Author
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-19ARM: Merge for-2635/fb-updates1Ben Dooks
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
2010-05-12ARM: SAMSUNG: Remove old email address for ben-linux@fluff.orgBen Dooks
The address ben@fluff.org is old, ben-linux@fluff.org has been in use for a long time, and we should fixup all the occasions of the older address to avoid confusion. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10fix "seperate" typos in commentsAnand Gadiyar
s/seperate/separate Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-10ARM: S3C2443: Move parts of the clock code to common clock fileBen Dooks
To share code with some of the newer parts such as the S3C2416, move parts of arch/arm/mach-s3c2443/clock.c to a common file called arch/arm/plat-s3c24xx/s3c2443-clock.c. Update the build configuration to deal with this new file. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10ARM: SAMSUNG: Add s3c_disable_clocks() and tidy init+disable usageBen Dooks
Add s3c_disable_clocks() and change the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: Merge next-samsung-s3c2443-clockBen Dooks
Merge branch 'next-samsung-s3c2443-clock' into next-samsung
2010-03-07ARM: S3C2443: Add set_rate and round_rate calls for armdiv clockBen Dooks
Add set_rate and round_rate calls to armdiv for future use with cpu frequency scaling. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: S3C2443: Remove #if 0 for clk_mpllBen Dooks
The clk_mpll has long been moved into common clock code, remove the code completely instead of the nasty #if 0 block. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: S3C2443: Update notes on MPLLREF clockBen Dooks
Add note on MPLLREF clock source and why it cannot be easily removed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: S3C2443: Further clksrc-clk conversionsBen Dooks
Move more of the core clocks that where left over from the last commit as they are much more core to the system operation. This should allow for easier tracking of any problems. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: S3C2443: Change to using plat-samsung clksrc-clk implementationBen Dooks
The S3C2443 clock code could easily make use of the clksrc implementation in plat-samsung for many of the clocks. Make the clocks that easily move to clksrc-clk over, update any initialisation and remove the old register definitions from the header file (it is only being used once). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24ARM: SMDK2443: Enable AC97 deviceJassi Brar
Add AC97 controller to platform devices and initialize the AC97 gpios. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-22ARM: Merge next-samsung-s3c64xx-platdeletionBen Dooks
Merge branch 'next-samsung-s3c64xx-platdeletion' into next-samsung Conflicts: arch/arm/mach-s3c64xx/Makefile (fixed)
2010-02-21ARM: SAMSUNG: Remove dma-plat.h to allow plat-s3c64xx to be removedBen Dooks
dma-plat.h is the last file left in plat-s3c64xx, but to remove it we must also change the use of dma-plat.h by the core code and the s3c24xx implementation. Rename the s3c24xx dma-plat.h in the common plat-samsung directory as it may be used for other ports. Move the specific dma bits into the mach-s3c64xx directory and update the build as needed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-01ARM: S3C244X: Merge plat-s3c24xx s3c2440.h and s3c2442.h into s3c244x.hBen Dooks
Merge these two headers into one, these two SoCs are so similar. Note, correct fault in mach-smdk2443.h including the wrong header. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-30ARM: S3C2443: Use common clock gate codeBen Dooks
Add common clock gate code for each of the S3C2443 clock gate code. Whether to move this elsewhere will be decided later. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Add call to register array of clocksBen Dooks
Add s3c_register_clocks() to register an array of clocks, printing an error message if there is a problem. Replace all points in the code where this could be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Reduce size of struct clk.Ben Dooks
Reduce the size of struct clk by 12 bytes and make defining clocks with common implementation functions easier by moving the set_rate, get_rate, round_rate and set_parent calls into a new structure called 'struct clk_ops' and using that instead. This change does make a few clocks larger as they need their own clk_ops, but this is outweighed by the number of clocks with either no ops or having a common set of ops. Update all the users of this. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09Kconfig: Remove useless and sometimes wrong commentsMichael Roth
Additionally, some excessive newlines removed. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-01[ARM] S3C24XX: DMA: Split hardware regs out of <mach/dma.h>Ben Dooks
The <mach/dma.h> is for the driver API for the DMA system and should not have anything relying on the CPU specific registers. Remove the registers to <plat/dma-regs.h> for the code that really needs to know about them. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: Move plat/dma.hBen Dooks
Move the platform dma.h to dma-plat.h to ensure it doen't get confused with plat/dma.h Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-05S3C24XX: Move and update IIS headersBen Dooks
Move the IIS headers to their correct place. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18[ARM] S3C: Remove unnecessary <linux/delay.h> includesBen Dooks
As per Russell King's last review comment, find and remove all unnecessary includes of <linux/delay.h> in the files that do not need them. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18Merge branch 'next-s3c64xx-device' into next-mergedBen Dooks
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-16[ARM] S3C: Update time initialisation to fix S3C64XX time problemsBen Dooks
The S3C64XX timer is running at the wrong rate due to the assumptions made in the timer initialisation about the way the pwm dividers work. This means that time on the S3C64XX runs twice as fast as it should. Fix the problem by moving to using the clk framework to setup the pwm timer clock muxes, as the pwm-clock code has all the necessary knowledge of how the timer clock inputs are routed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C: Make i2c device definition common to plat-s3cBen Dooks
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C: Move HSMMC device definition to plat-s3ecBen Dooks
Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C64XX: Add initial clock frameworkBen Dooks
Add the initial clocks definitions for the s3c6400 and s3c6410. Move the epll and ext clock from the s3c2443 support into the common code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Update clock data on resumeBen Dooks
Update the clock settings on resume for suspend/resume support so that if the boot loader changes anything or the system's PLL is reset then we return with the correct settings. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3cBen Dooks
We need to add plat-s3c to the build to get the headers that will go in here once moved from include/asm-arm so we may as well put some useful common s3c code in here to stop the errors generated form having nothing built. The cpu setup is now passed the cpu idcode and the table of supported cpus to s3c_init_cpu() to abstract the cpu identification out of the initial io setup. As well as moving the cpu initialisation code, we move the map of the board specific items up to the calling code as none of the map_io() functions actually do anything other than pass this to iotable_init(). This patch does not rename any of the init functions that will be common to s3c24xx and any other s3c architectures as this can be done at a later date as it will touch all the board support files which use functions such as s3c24xx_init_clocks() and s3c24xx_init_uarts(). Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h still has functions that are used by both the cpu and board initialisation functions. This means that each board has definitions specific to the cpu support included and the vice-versa. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-29Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] S3C: Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat ready ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move regs-ac97.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move regs-ac97.h to arch/arm/plat-s3c/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-17Merge branch 'for-rmk-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2008-10-16[ARM] S3C2443: Fix HCLK rateBen Dooks
Fix the calculation of HCLK on the S3C2443, it should not have been passed through S3C2443_CLKDIV0_HALF_HCLK. Re-work of original patch from Wei Shuai <cpuwolf@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-14Merge branch 's3c-move' into develRussell King
Conflicts: arch/arm/mach-versatile/core.c
2008-10-09Merge branch 'pxa-all' into develRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-09[ARM] 5298/1: Drop desc_handle_irq()Dmitry Baryshkov
desc_handle_irq() was declared as obsolete since long ago. Replace it with generic_handle_irq() Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] S3C24XX: Additional include movesBen Dooks
Continue moving the include files into arch/arm Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07[ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*Ben Dooks
First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] S3C2443: Add prediv clk and fix setting of h and p clocksBen Dooks
Update the S3C2443 clock support to add the prediv clock that is sourced via a divider from msysclk. Also fix the setting of p and h clocks from this prediv clock. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] S3C2443: Add armdiv and arm clocksBen Dooks
Add the armdiv and arm clocks to the S3C2443 clock framework and ensure they are correctly setup. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] S3C2443: Fix s3c2443_clkcon_enable_p() using wrong register.Ben Dooks
s3c2443_clkcon_enable_p() was reading from the correct register S3C2443_PCLKCON, but then writing the value back to the wrong register S3C2443_HCLKCON. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-01-24Driver core: change sysdev classes to use dynamic kobject namesKay Sievers
All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>