summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5pv210/mach-goni.c
AgeCommit message (Collapse)Author
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-21ARM: S5PV210: Enable MFC on GoniKamil Debski
Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210Ajay Kumar
Use plat/regs-fb-v4.h in machine files instead of mach/regs-fb.h. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits) Input: tsc2005 - remove 'disable' sysfs attribute Input: tsc2005 - add open/close Input: tsc2005 - handle read errors from SPI layer Input: tsc2005 - do not rearm timer in hardirq handler Input: tsc2005 - don't use work for 'pen up' handling Input: tsc2005 - do not use 0 in place of NULL Input: tsc2005 - use true/false for boolean variables Input: tsc2005 - hide selftest attribute if we can't reset Input: tsc2005 - rework driver initialization code Input: tsc2005 - set up bus type in input device Input: tsc2005 - set up parent device Input: tsc2005 - clear driver data after unbinding Input: tsc2005 - add module description Input: tsc2005 - remove driver banner message Input: tsc2005 - remove incorrect module alias Input: tsc2005 - convert to using dev_pm_ops Input: tsc2005 - use spi_get/set_drvdata() Input: introduce tsc2005 driver Input: xen-kbdfront - move to drivers/input/misc Input: xen-kbdfront - add grant reference for shared page ...
2011-03-12ARM: S5P: Update machine of S5P64X0 and S5PV210 for HRTSangbeom Kim
This patch adds support HRT for machines of S5P64X0 and S5PV210. Basically, PWM Timer3 is used for clockevent and PWM Timer4 is used for clocksource. Since PWM Timer3 is used for other purpose, PWM Timer2 is used on SMDKV210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-24ARM: S5PV210: Add power consumers for hsotg for GONI boardMarek Szyprowski
This patch adds definitions for power consumers for s3c-hsotg driver on Goni board. The consumers are defined as arrays, because later more entries for MIPI and ADC will be defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-24ARM: S5PV210: Disable unused power regulators on GONI boardMarek Szyprowski
A lot of power regulator has been enabled by default causing the board to consume a lot of power. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: S5PV210: Change framebuffer window 0 size on GONISylwester Nawrocki
Increase virtual size of the frambuffer window 0 for display panning support. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: S5PV210: Add supplies for CIF camera on GONI boardSylwester Nawrocki
Add regulator supplies required for NOON010PC30 CIF sensor. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: S5PV210: Enable I2C0 bus on GONI boardSylwester Nawrocki
Add I2C0 bus platform device for camera sensors. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: S5PV210: Use REGULATOR_SUPPLY macro for regulator consumersKukjin Kim
To use REGULATOR_SUPPLY macro is cleaner for initializing regulator consumer supply. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-21Input: atmel_mxt_ts - allow board code to specify IRQ flagsIiro Valkonen
Different board have different requirements/setups so let's be more flexible. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - get rid of qt602240 prefixes in namesIiro Valkonen
Change prefixes from qt602240 to mxt to reflect that the driver supports whole line of mXT touchscreens. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: qt602240_ts - rename to atmel_mxt_tsDmitry Torokhov
Since the driver will be supporting whole range of Atmels mXT touchscreen controllers we better rename it to atmel_mxt_ts. Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-18ARM: S5PV210: Fix regulator namesMarek Szyprowski
Since commit 1130e5b3ff4 regulators are exported to debugfs. The names of the regulators that contains slash ('/') causes an ops during kernel boot. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-18ARM: S5PV210: Update max8998_platform_dataMarek Szyprowski
Max8998 PMIC driver's platform data has been changed once again in commit 735a3d9efdc. This patch fixes build break caused by that commit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-17ARM: S5PV210: update MAX8998 platform data to get rid of WARN()Marek Szyprowski
This patch adds new entries required by the new version of MAX8998 driver. Without them, the driver fails to init. See commit 50f19a4596 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-28Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mach-s3c64xx/dev-audio.c
2010-10-25ARM: S5PV210: Add voltage consumer of WM8994 to the regulator frameworkChanwoo Choi
This patch add cose related to regulator. To control powre consumeption have registered the voltage consumer of WM8994 to the regulator framework. Additionally, I explain the constraints of the regulator of WM8994 codec. All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V) on a circuit diagram. "VCC_1.8V" regulator is always enabled, because it is used to many devices on Goni/Aquila board. This is required especially when there are many devices physically attached to "VCC_1.8V" and some of they did not "register" as consumers to "VCC_1.8V". "VCC_1.8V" might be turned off by those who are registered while "unregistered" are still active Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add init code of audio to Goni and Auqila boardChanwoo Choi
This patch add initialization code of audio and I2S platform drivers to Goni and Aquila board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add i2c information to Goni and Aquila boardChanwoo Choi
This patch the I2C board information for the WM8994 used in the Goni/Aquila as audio codec and adds the I2C platform drivers. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: GONI: Add support for QT602240 TS driverMarek Szyprowski
Add required platform definitions for QT602240 touchscreen on I2C2 bus. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add si470x radio device to the GONI boardMarek Szyprowski
Add required platform definitions for si470x radio device on Samsung Goni board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add support for S6E63M0 LCD controller on GONI boardMarek Szyprowski
Add required platform definitions for S6E63M0 LCD controller on Samsung Goni board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] [kgene.kim@samsung.com: fix build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Support for MMC regulators on GONI boardMarek Szyprowski
Add required platform definitions for MMC power regulators on Samsung Goni board. GPIO pin GONI_EXT_FLASH_EN has been transferred from machine startup code to fixed voltage regulator. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Support for OTG USB Gadget on GONI boardMarek Szyprowski
Add required platform definitions for s3c-hsotg driver to enable usb gadget support on Samsung Goni board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: fb setup for GONI - remove pixel clockMarek Szyprowski
Since commit 67a38950f0917aecfe1a3e46720d8bbb0020 there is no need to set pixel clock for the s3c-fb driver's window information. The correct pixel clock value can be automatically calculated from the other screen parameters. This patch removes the redundant pixel clock parameter. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: update framebuffer setup information for GONIMarek Szyprowski
Change the default upper_margin and vsync_len to get rid of repeated last line on the display. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add keypad device to the GONI boardJoonyoung Shim
This patch is to support keypad device to the GONI board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-18ARM: S5P: Move OneNAND device definitions in plat-s5pKukjin Kim
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
2010-08-09ARM: S5PV210: enable FIMC on GoniSylwester Nawrocki
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-06Merge branch 'next-s5p' into for-nextKukjin Kim
Conflicts: arch/arm/mach-s5pv210/mach-aquila.c arch/arm/mach-s5pv210/mach-goni.c
2010-08-05ARM: S5PV210: Add SDHCI devices for GONI boardMarek Szyprowski
This patch add support for SDHCI blocks on Samsung Goni board. The following host controllers are defined: 1. Internal MoviNAND device (permanently wired to the controller) 2. Internal WiFI SDIO device (card is activated by power regualor) 3. External MMC/SD socket (card detection is provided by external gpio interrupt) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05ARM: S5PV210: Add MAX8998 PMIC support for GONIMarek Szyprowski
This patch adds required platform definitions for MAX8998 PMIC driver. Power regulators for LDO and BUCK outputs has been defined as well as a simple gpio-keys button for power key (to enable wakeup functionality with external interrupt). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [broonie@opensource.wolfsonmicro.com: For the regulator API usage] Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05ARM: S5PV210: Add Framebuffer support for GONIMarek Szyprowski
This patch adds required platform definitions to enable s3c-fb driver on GONI board. One framebuffer window in 480x800x16bpp mode is defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05ARM: S5PV210: Add OneNAND device to the GONI boardJoonyoung Shim
This patch is to support OneNAND device to the GONI board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05ARM: S5PV210: Fix GONI board UART FIFO mode configrationJoonyoung Shim
The GONI board uses max UART FIFO size to each UART channels. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05ARM: S5P: Changes the definition name of default UART registersKukjin Kim
This patch changes the definition name of default UCON, ULCON, and UFCON UART registers from ARCH(SoC) to Machine(Board). Because it depends on machine. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-05-20ARM: S5PV210: Add GONI board supportJoonyoung Shim
This is for samsung GONI board using s5pc110. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 12:12:12 +0000