summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2011-04-06ARM: arch-shmobile: only run FSI init on respective boardsKuninori Morimoto
If several boards are enabled in the kernel configuration, fsi_init_pm_clock() functions from board-ap4evb.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: arch-shmobile: only run HDMI init on respective boardsGuennadi Liakhovetski
If several boards are enabled in the kernel configuration, hdmi_init_pm_clock() functions from board-ap4evb.c and board-mackerel.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKERELSimon Horman
I made a bit of a thinko when adding Mackerel to the boards that support zboot using MMCIF. Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25ARM: mach-shmobile: fix SDHI IO address-rangeGuennadi Liakhovetski
SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.hGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-24Merge branch 'rmobile-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: Add MMC_PROGRESS_* mmc, ARM: Rename SuperH Mobile ARM zboot helpers ARM: mach-shmobile: add coherent DMA mask to CEU camera devices ARM: mach-shmobile: Dynamic backlight control for Mackerel
2011-03-25mmc, ARM: Rename SuperH Mobile ARM zboot helpersSimon Horman
These headers and helpers will also be used for SDHI boot so the mmcif name will start to make a lot less sense. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ...
2011-03-23ARM: mach-shmobile: add coherent DMA mask to CEU camera devicesGuennadi Liakhovetski
Cameras are currently broken on ARM sh-mobile platforms. They need a suitable coherent DMA mask. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-23ARM: mach-shmobile: Dynamic backlight control for MackerelMagnus Damm
Use GPIO_PORT31 to control the backlight on the Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-20Merge branches 'fixes', 'pgt-next' and 'versatile' into develRussell King
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (308 commits) ALSA: sound/pci/asihpi: check adapter index in hpi_ioctl ALSA: aloop - Fix possible IRQ lock inversion ALSA: sound/core: merge list_del()/list_add_tail() to list_move_tail() ALSA: ctxfi - use list_move() instead of list_del()/list_add() combination ALSA: firewire - msleep needs delay.h ALSA: firewire-lib, firewire-speakers: handle packet queueing errors ALSA: firewire-lib: allocate DMA buffer separately ALSA: firewire-lib: use no-info SYT for packets without SYT sample ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver ALSA: hda - Remove an unused variable in patch_realtek.c ALSA: hda - pin-adc-mux-dmic auto-configuration of 92HD8X codecs ALSA: hda - fix digital mic selection in mixer on 92HD8X codecs ALSA: hda - Move default input-src selection to init part ALSA: hda - Initialize special cases for input src in init phase ALSA: ctxfi - Clear input settings before initialization ALSA: ctxfi - Fix SPDIF status retrieval ALSA: ctxfi - Fix incorrect SPDIF status bit mask ALSA: ctxfi - Fix microphone boost codes/comments ALSA: atiixp - Fix wrong time-out checks during ac-link reset ALSA: intel8x0m: append 'm' to "r_intel8x0" ...
2011-03-16Merge branch 'p2v' into develRussell King
Conflicts: arch/arm/kernel/module.c arch/arm/mach-s5pv210/sleep.S
2011-03-16Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', ↵Russell King
'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel
2011-03-16Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-03-04ARM: mach-shmobile: mackerel: modify LCDC clock divider valueKuninori Morimoto
mackerel WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04ARM: mach-shmobile: ap4evb: modify LCDC clock divider valueKuninori Morimoto
ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-23ARM: 6759/1: smp: Select local timers vs broadcast timer support runtimeSantosh Shilimkar
The current code support of dummy timers in absence of local timer is compile time. This is an attempt to convert it to runtime so that on few SOC version if the local timers aren't supported kernel can switch to dummy timers. OMAP4430 ES1.0 does suffer from this limitation. This patch should not have any functional impact on affected files. Cc: Daniel Walker <dwalker@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-15ARM: mach-shmobile: mackerel: fixup memory initialize for zbootKuninori Morimoto
Current makerel had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15ARM: mach-shmobile: ap4evb: fixup memory initialize for zbootKuninori Morimoto
Current ap4evb had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-01ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocksMagnus Damm
Update the sh73a0 CPGA to support clocks for CEU and MIPI-CSI. This includes MSTP bits for CSI and CEU and div6 clkdev bindings for VCK1-3. Fix the order of the MSTP32 entries in the clkdev table while at it. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-01ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fixMagnus Damm
Add a 100 ms delay after the MIPI-DSI panel reset to fix issue related to the LCD panel not starting properly at boot up time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-26ASoC: sh: fsi: modify selection method of I2S/PCM/SPDIF formatKuninori Morimoto
Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-25ASoC: sh: fsi-hdmi: Add FSI port and HDMI selectionKuninori Morimoto
This patch add platform_device_id which can control PortA/PortB for FSI2-HDMI from platform data. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-25ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARMSimon Horman
This allows a ROM-able zImage to be written to MMC and for SuperH Mobile ARM to boot directly from the MMCIF hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Magnus Damm <magnus.damm@gmail.com> Russell, please consider merging this for 2.6.38. This patch depends on: * "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h" which will be merged though Paul Mundt's rmobile sh-2.6. The absence of this patch will break the build if the (new) CONFIG_ZBOOT_ROM_MMCIF option is set. There are no subtle side-effects. v2: Addressed comments by Magnus Damm * Fix copyright in vrl4.c * Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c * Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c as this is considered board-specific. v3: Addressed comments made in person by Magnus Damm * Move mmcif_loader to be earlier in the image and reduce the number of blocks of boot program loaded by the MaskRom from 40 to 8 accordingly. * Move LED GPIO initialisation into mmcif_progress_init - This leaves the partner jet script unbloated Other * inline mmcif_update_progress so it is a static inline in a header file v4: * Use htole16() and htole32() in v4rl.c to ensure that the output is little endian v5: Addressed comments by Russell King * Simplify assembly code * Jump to code rather than an address <- bug fix * Use (void __iomem *) as appropriate Roll in mackerel support * This was previously a separate patch, only because of the order in which this code was developed Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21ASoC: sh: fsi: Add snd_soc_dai_set_fmt supportKuninori Morimoto
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-20ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform dataMagnus Damm
Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bitMagnus Damm
PLL1 and PLL2 in the sh73a0 CPGA has a CFG bit that must be taken into account to correctly calculate the frequency. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-19ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settingsSimon Horman
* Pins 2 and 4 of switch 33 are documented as don't care on the PCB, my testing seems to confirm this. * I have been unable to do anything sensible with S1 set to on. Am I missing something with regards to MMC1? * Clarify which driver is needed for each switch setting. * Should the AP4 board code be updated to allow the SHDI driver to access SHDI1 as the mackerel code does? Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTPMagnus Damm
Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3Magnus Damm
Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: remove sh7367 on-chip set_irq_type()Magnus Damm
set_irq_type() should only be used for external IRQ pins, so update the G3EVM board code to remove low level request. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt updateMagnus Damm
Enable the MFIS2 interrupt source in the INTCS interrupt controller included in the sh7372 processor. The priority field is constantly enabled to let the interrupt through to both the ARM side and the SH side. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: ag5evm: Add IrDA supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rateKuninori Morimoto
This patch fixup 421b446abeec55bed1251fab80cb5c12be58b773 - Care clk->rate - Don't over write PLLC2 enable bit Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-14ARM: mach-shmobile: ag5evm requires GPIOLIBYoshii Takashi
Because ag5evm board setup code uses gpio functions, ARCH_REQUIRE_GPIOLIB should be set in Kconfig. Otherwise, the first build with defconfig fails. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-14ARM: mach-shmobile: fix cpu_base of gic_init() on sh73a0Yoshii Takashi
The latest rmobile-latest doesn't run on ag5evm because of a small mistake on initialization. Though, I don't have any idea to write them smart. anyway, On sh73a0, GIC cpu_base is 0xf0000100 but 0xf0001000. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'rmobile-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: Kill off unused !gpio_is_valid() case ARM: mach-shmobile: sh7372 Enable SDIO IRQs for Mackerel ARM: mach-shmobile: sh7377 Enable SDIO IRQs ARM: mach-shmobile: sh7367 Enable SDIO IRQs ARM: mach-shmobile: sh7372 Enable SDIO IRQs ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support ARM: mach-shmobile: ap4eb: SCIF port for earlyprintk when using zboot ARM: mach-shmobile: mackerel: SCIF port for earlyprintk when using zboot ARM: mach-shmobile: mackerel: Add support get_cd in CN23
2011-01-13Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (31 commits) sh: Add support for AP-SH4AD-0A board. sh: Add support for AP-SH4A-3A board. sh: Add a new mach type for alpha project boards. serial: sh-sci: build fixes. sh: sh7372 SH4AL-DSP probe support sh: sh7366 Enable SDIO IRQs sh: sh7343 Enable SDIO IRQs sh: mach-ecovec24: enable runtime PM for SDHI sh: sh7723 / ap325rxa enable SDIO IRQs sh: sh7722 Enable SDIO IRQs sh: sh7724 Enable SDIO IRQs sh: Fix up legacy PTEA space attribute mapping. sh: Stub out legacy PCC pgprot encoding for X2 TLBs. sh: constify prefetch pointers. sh: Add a machvec callback for early memblock reservations. sh: update sh7757lcr_defconfig sh: add PVR probing for SH7757 3rd cut sh: Use device_initcall() instead of __initcall() sh: intc - convert board specific landisk code sh: Move init_landisk_IRQ to header file ...
2011-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits) ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO ALSA: oxygen: fix Xonar DG input ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low ALSA: hda - Fix missing EAPD for Acer 4930G ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs. ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser ALSA: hda - Don't refer ELD when unplugged ASoC: tpa6130a2: Fix compiler warning ASoC: tlv320dac33: Add DAPM selection for LOM invert ASoC: DMIC codec: Adding a generic DMIC codec ALSA: snd-usb-us122l: Fix missing NULL checks ALSA: snd-usb-us122l: Fix MIDI output ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync() ASoC: Fix section mismatch in wm8995.c ALSA: oxygen: add S/PDIF source selection for Claro cards ALSA: oxygen: fix CD/MIDI for X-Meridian (2G) ASoC: fix migor audio build ALSA: include delay.h for msleep in Xonar DG support ...
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-01-13ARM: mach-shmobile: Kill off unused !gpio_is_valid() caseMagnus Damm
The Card Detect GPIOs used on AP4EVB and Mackerel are alwayws valid, so kill off the unused !gpio_is_valid() case. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework Conflicts: arch/sh/kernel/cpu/sh2/setup-sh7619.c arch/sh/kernel/cpu/sh2a/setup-mxg.c arch/sh/kernel/cpu/sh2a/setup-sh7201.c arch/sh/kernel/cpu/sh2a/setup-sh7203.c arch/sh/kernel/cpu/sh2a/setup-sh7206.c arch/sh/kernel/cpu/sh3/setup-sh7705.c arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh4-202.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4/setup-sh7760.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7780.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c arch/sh/kernel/cpu/sh4a/setup-shx3.c arch/sh/kernel/cpu/sh5/setup-sh5.c drivers/serial/sh-sci.c drivers/serial/sh-sci.h include/linux/serial_sci.h
2011-01-12Merge branch 'rmobile/sdio' into rmobile-latestPaul Mundt
2011-01-12ARM: mach-shmobile: sh7372 Enable SDIO IRQs for MackerelMagnus Damm
Enable SDIO IRQ support for the Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7377 Enable SDIO IRQsMagnus Damm
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7377 aka G4 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. The G4EVM specific SDHI platform data is also updated to flag SDIO capabilities. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7367 Enable SDIO IRQsMagnus Damm
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7367 aka G3 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-11 23:08:49 +0000