summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500-pins.c
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC driver specific changes from Olof Johansson: "A collection of mostly SoC-specific driver updates: - a handful of pincontrol and setup changes - new drivers for hwmon and reset controller for vexpress - timing support updates for OMAP (gpmc and other interfaces) - plus a collection of smaller cleanups" * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: ux500: fix pin warning ARM: OMAP2+: tusb6010: generic timing calculation ARM: OMAP2+: smc91x: generic timing calculation ARM: OMAP2+: onenand: generic timing calculation ARM: OMAP2+: gpmc: generic timing calculation ARM: OMAP2+: gpmc: handle additional timings ARM: OMAP2+: nand: remove redundant rounding gpio: samsung: use pr_* instead of printk ARM: ux500: fixup magnetometer pins ARM: ux500: add STM pin configuration ARM: ux500: 8500: add pinctrl support for uart1 and uart2 ARM: ux500: cosmetic fixups for uart0 gpio: samsung: Fix input mode setting function for GPIO int ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip ARM: ux500: 8500: define SDI sleep states ARM: vexpress: Reset driver ARM: ux500: 8500: update SKE keypad pinctrl table hwmon: Versatile Express hwmon driver ARM: ux500: delete duplicate macro ARM: ux500: 8500: add IDLE pin configuration for SPI ...
2012-11-15ARM: ux500: fix pin warningLinus Walleij
Recent pin changes produce this warning: arch/arm/mach-ux500/board-mop500-pins.c:73:22: error: 'out_hi_wkup_pdis' defined but not used [-Werror=unused-variable] Fix this by deleting the offending definition. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-06ARM: ux500: fixup magnetometer pinsJorgen Jonsson
GPIO31 and GPIO32 (CTS/RTS) are handled by the magnetometer and shall not simultaneously be controlled by UART2. Reported-by: Peter Nessrup <peter.nessrup@stericsson.com> Signed-off-by: Jorgen Jonsson <jorgen.jonsson@stericsson.com> Reviewed-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-28pinctrl/nomadik: merge old pincfg headerLinus Walleij
This merges the old <plat/pincfg.h> header into <linux/platform_data/pinctrl-nomadik.h> and rids us of yet one more <plat/*> include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-28pinctrl/nomadik: move the platform data headerLinus Walleij
This moves the platform data header for the Nomadik pin controller to <linux/platform_data/pinctrl-nomadik.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-25ARM: ux500: add STM pin configurationJean-Nicolas Graux
This patch add the new stm pinctrl states definitions for the Ux500 MOP500 series. Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com> Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-25ARM: ux500: 8500: add pinctrl support for uart1 and uart2Patrice Chotard
This adds pin mappings for UART1 and UART2. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-24ARM: ux500: cosmetic fixups for uart0Patrice Chotard
Changed a comment and ordered BIAS defines around a bit. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-22ARM: ux500: 8500: define SDI sleep statesPatrice Chotard
This defines the sleep states for the SDI (MMC/SD) interfaces on the MOP500 reference designs. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-18ARM: ux500: 8500: update SKE keypad pinctrl tablePatrice Chotard
The old pinctrl table for the SKE keypad was using all the wrong settings and positions. Fixing it up to one that works! Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>nn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-16ARM: ux500: delete duplicate macroLinus Walleij
Some merge mishap has caused the DB8500_PIN_SLEEP() macro to appear twice. Get rid of the suplus copy. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15ARM: ux500: 8500: add IDLE pin configuration for SPIPatrice Chotard
This adds an idle state to the SPI pin control entry. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15ARM: ux500: 8500: register LCD VSI pinctrl tablePatrice Chotard
This fixes up the pins used by the VSI interface to the HDMI AV8100 encoder. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-28ARM: ux500: 8500: update I2C sleep states pinctrlPatrice Chotard
This defines the proper sleep states for all the I2C pins of the MOP500 DB8500 ASIC setting. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-27ARM: ux500: tidy up pin sleep modesLinus Walleij
This named the sleep mode pin configurations as *slpm* rather than *sleep* to correspond better with the settings from the datasheet. It also defines an optional sleep mode for the SPI controller SPI2. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-18ARM: ux500: fix spi2 pin groupPatrice Chotard
GPIO216_AG12 is configured as a gpio for SPI2, so select the spi2_oc1_2 pin group instead of spi2_oc1_1 Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-17ARM: ux500: 8500: use hsit_a_2 group for HSIPatrice Chotard
Due to specific constraint, pin HSIT_ACWAKE0_a is not driven by HSI block but as a GPIO. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11ARM: ux500: switch MSP to using pinctrl for pinsLinus Walleij
The MSP platform data callbacks use the old custom callbacks to set the state of the pins, switch over to using pinctrl. Cc: Ola Lilja <ola.o.lilja@stericsson.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11ARM: ux500: switch to using pinctrl for uart0Linus Walleij
UART0 had a hack that enabled its pins on init and put it to sleep on the exit callback. Replace this with the pinctrl calls to do the same thing and update the runtime table with the two apropriate states for runtime/active and idle. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11ARM: ux500: delete custom pin control systemLinus Walleij
At the beginning of the first patch series I included the custom ux500 pin control system to make sure I could eventually replace it with the standard subsystem driver. So now that we've done so, let's remove it. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11ARM: ux500: switch over to Nomadik pinctrl driverLinus Walleij
This converts the Ux500 family to use the pinctrl driver for configuring pins. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24ARM: ux500: update pin handlingLinus Walleij
This updates the Ux500 pin handling to take much more care when applying pin settings for different platforms and peripherals. This is an accumulation of a longer history of updates to the MOP500 family pin file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24ARM: ux500: implement pin APIRabin Vincent
Implement an API to allow a list of pincfgs to be remuxed to active and sleep modes, for power saving. This is not exported on purpose, because it is not to be called by drivers directly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29bug.h: add include of it to various implicit C usersPaul Gortmaker
With bug.h currently living right in linux/kernel.h there are files that use BUG_ON and friends but are not including the header explicitly. Fix them up so we can remove the presence in kernel.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Merge branch 'next/fixes' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h drivers/video/omap/lcd_apollon.c drivers/video/omap/lcd_ldp.c drivers/video/omap/lcd_overo.c
2011-08-30mach-ux500: remove most of the ugly machine_is_*() callsLee Jones
Do more work in the per-machine init calls instead of customizing each init call. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-22ARM: 7032/1: plat-nomadik: break out GPIO driver specificsLinus Walleij
The <[plat|mach]/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-17Merge branches 'cns3xxx/devel', 'davinci/devel', 'imx/devel', ↵Arnd Bergmann
'lpc32xx/devel', 'pxa/devel', 'tegra/devel' and 'stericsson/master' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel
2011-06-23mach-ux500: Add pin configuration for snowball boardRobert Marklund
This sets up a few GPIO pins and some pinmuxing on platform boot for the Snowball board. Based on work from Mathieu J. Poirier <mathieu.poirier@linaro.org>. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-16amba pl011: platform data for reg lockup and glitch v2Shreshtha Kumar Sahu
This patch provides platform data for following - uart reset function to assist uart register lockup workaround - init/exit function to fix glitch in the tx pin in tty_open when tty port0 is opened a glitch is seen in the tx line of uart0. This happens in pl011_startup() when tx fifo interrupt is provoked into asserting. Now uart0 pins are enabled (alt function) only when init is complete and turned back to gpio when closed. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14mach-ux500: add hrefv60 GPIO pinsBibek Basu
This will centralize all GPIO pin muxing for the different boards in the MOP500 family to a single file. It also kills off the deprecated support for the ED (Early Drop) ASIC, this should never be spotted in the open and ST-Ericsson have internally deprecated this hardware. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Rebasing and kill old ASIC support] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: move MOP500 pins to separate fileRabin Vincent
Split off pin definitions for the MOP500 board family to its own file. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 01:13:22 +0000