summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500.c
AgeCommit message (Collapse)Author
2011-05-25mach-ux500: set proper I2C platform data from MOP500sLinus Walleij
This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-04-20mach-ux500: fix i2c0 device setup regressionLinus Walleij
Adding two sets of I2C devices to the same bus doesn't quite work, atleast not anymore. Stash one array and determine how much of it shall be added instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-28mach-ux500: configure board for the TPS61052 regulator v2Linus Walleij
This registers the TPS61052 regulator to the ux500 MOP/HREF boards. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-28mach-ux500: provide ab8500 init vectorBengt Jonsson
This adds an ab8500 regulator initialization vector for the HREF/MOP500 series of boards. This also sets the display regulator to be on at boot so we don't loose our splash screen when the board comes up. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-28mach-ux500: board support for AB8500 GPIO driverBibek Basu
This is the board support patch for ab8500 gpio driver on mach-ux500.Patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Modify for header file placement] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-26regulator: initialization for ab8500 regulatorsBengt Jonsson
The regulators on the AB8500 have a lot of custom hardware control settings pertaining to 8 external signals, settings which are board-specific and need be provided from the platform at startup. Initialization added for regulators Vana, VextSupply1, VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout, Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: move MOP500 pins to separate fileRabin Vincent
Split off pin definitions for the MOP500 board family to its own file. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: config Ux500 PL011 PL022 PL180 for DMALinus Walleij
This will configure the platform data for the PL011, PL022 and PL180 (derivate) PrimeCells found in the Ux500 to use DMA with the generic DMA engine for DMA40. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db8500 devicesMian Yousaf Kaukab
- DMA tx and rx maps for usb channels are set to be configured at runtime - GPIO configurations for usb are added - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: Add Rohm BH1780GLI Light Sensor to i2c_board_infoLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: platform data for LP5521 leds driverPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: platform data for SFH7741 proximity sensor driverPhilippe Langlais
Proximity sensor is managed as an input event (SW_PROXIMITY). Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> [Named GPIO pin] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add U8500 UIB platform dataSundar Iyer
The U8500 UIB contains a Synaptics RMI touchpanel and a matrix keyboard via the TC35893 port expander device. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: dynamic UIB (user interface boards) detectionRabin Vincent
Add support for dynamic detection of the UIB used (at the cost of one i2c error on the lesser-used UIB) and also provide an override via a command line parameter if needed. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-01-12mach-ux500: Updated and connected ab8500 regulator board configurationBengt Jonsson
The ab8500 regulator board configuration is updated and put in an array which can easily be used in the MFD board configuration. The regulator board configuration is also added to the MFD configuration in this patch. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-19mach-ux500: add STMPE1601 platform dataSundar Iyer
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Minor fixups to GPIO enumerators] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mach-ux500: move keymaps to new fileSundar Iyer
Move keylayouts to a dedicated file and plug these keylayouts for input platform data. This will make addition of new and custom keylayouts localized. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mfd/tc3589x: add block identifier for multiple child devicesSundar Iyer
Add block identifier to be able to add multiple mfd clients to the mfd core Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mfd/tc3589x: rename tc35892 structs/registers to tc359xSundar Iyer
Most of the register layout, client IRQ numbers on the TC35892 is shared also by other variants. Make this generic as tc3589x Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mach-ux500: deprecate spi support for ab8500Sundar Iyer
Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: remove ambiguous irq macrosRabin Vincent
Remove the irq number macros which don't specify which SoC they're for. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: mop500: add TC35892 and MicroSD slot supportRabin Vincent
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-21Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits) arm: remove machine_desc.io_pg_offst and .phys_io arm: use addruart macro to establish debug mappings arm: return both physical and virtual addresses from addruart arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC ARM: make struct machine_desc definition coherent with its comment eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free cpuimx27: fix compile when ULPI is selected mach-pcm037_eet: fix compile errors Fixing ethernet driver compilation error for i.MX31 ADS board cpuimx51: update board support mx5: add cpuimx51sd module and its baseboard iomux-mx51: fix GPIO_1_xx 's IOMUX configuration imx-esdhc: update devices registration mx51: add resources for SD/MMC on i.MX51 iomux-mx51: fix SD1 and SD2's iomux configuration clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability clock-mx51: factorize clk_set_parent and clk_get_rate eukrea_mbimxsd: add support for DVI displays cpuimx25 & cpuimx35: fix OTG port registration in host mode i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472 ...
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-13ux500 - add platform data for Nomadik SKE keypad controllerSundar Iyer
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-12spi/pl022: Add spi->mode support to AMBA SPI driverKevin Wells
This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-19ARM: 6337/2: AB8500 I2C platform configuration and irqLinus Walleij
This patch adds the platform part of the AB8500 PRCMU I2C access driver. The old irq name AB4500 is changed to AB8500. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6335/1: ux500: mop500: register eMMC devicesHanumath Prasad
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6267/1: mop500: add AB8500 interrupt supportRabin Vincent
Add the platform data to enable AB8500 interrupt support. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500Rabin Vincent
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16ARM: 6161/1: mop500: add basic pin configurationRabin Vincent
Use the newly added infrastructure to configure the SSP0 and I2C[0-3] pins on the MOP500 board. The u8500_init_devices() call needed to be moved up in order to register the GPIO device first. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-28mfd: New AB8500 driverRabin Vincent
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-04ARM: 6087/1: ux500: move sys_timer to cpu.cRabin Vincent
Move the common system timer setup code to cpu.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6085/1: ux500: reorganize i2c devicesRabin Vincent
Move common i2c devices to devices.c and DB8500-specific I2C devices to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6084/1: ux500: move UART devices to devices.cRabin Vincent
The three PL011 UARTs are common among Ux500 SoCs, so move them to devices.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6083/1: ux500: put DB8500-specific devices in devices-db8500.cRabin Vincent
Add devices-db8500.c for DB8500-specific devices, starting with SSP0. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6082/1: ux500: put common devices into devices.cRabin Vincent
Introduce devices.c, for placing devices common among Ux500 SoCs. Start with the PL031 device. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6080/1: ux500: move irq and common maps to cpu.cRabin Vincent
Move IRQ initialization and common io mapping setup code to cpu.c, renaming U8500* to UX500* along the way. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5964/1: ux500: support clock gatingRabin Vincent
Implement clock gating support for the u8500 clocks. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5962/1: ux500: move system timer to cpu fileRabin Vincent
There is nothing board-specific about the system timer, so move it to the CPU file. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-04ARM: 5913/1: ARM U8500: add I2C platform configurationsSrinidhi Kasagar
This adds platform configurations to support four i2c controllers found on early MOP500 platform This depends on the patch 5908/1 for build to succeed. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-04ARM: 5915/1: Add RTC PL031 derivative platform config for ux500Linus Walleij
This configures the PL031 RTC resources for ux500. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5831/1: ARM: U8500 core machine supportSrinidhi Kasagar
Adds core support for the ST-Ericsson U8500 platform. It supports memory mappings, binds to the existing modules like GIC, SCU, TWD and local timers and sets up the infrastructure for the secondary core. Reviewed-by: Alessandro Rubini <rubini@unipv.it> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 03:44:37 +0000