summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
AgeCommit message (Collapse)Author
2011-06-09gpio/nomadik: fix sleepmode for elder NomadikLinus Walleij
The mach-nomadik machine did not compile properly due to bad ux500-specific functions being called. Introduce new state variables to fix this up. Reported-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Prafulla Wadaskar <prafulla.wadaskar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-28Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/pch_gpio: Support new device ML7223 gpio: make gpio_{request,free}_array gpio array parameter const GPIO: OMAP: move to drivers/gpio GPIO: OMAP: move register offset defines into <plat/gpio.h> gpio: Convert gpio_is_valid to return bool gpio: Move the s5pc100 GPIO to drivers/gpio gpio: Move the s5pv210 GPIO to drivers/gpio gpio: Move the exynos4 GPIO to drivers/gpio gpio: Move to Samsung common GPIO library to drivers/gpio gpio/nomadik: add function to read GPIO pull down status gpio/nomadik: show all pins in debug gpio: move Nomadik GPIO driver to drivers/gpio gpio: move U300 GPIO driver to drivers/gpio langwell_gpio: add runtime pm support gpio/pca953x: Add support for pca9574 and pca9575 devices gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535
2011-05-26gpio: move Nomadik GPIO driver to drivers/gpioGrant Likely
This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: squashed with kconfig fixup] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26ARM: 6830/1: mach-ux500: force PrimeCell revisionsLinus Walleij
The DB8500v2 and DB5500 has a fifth version of the "PL023" and PL180 blocks. However the ASIC engineers have forgot to bump the revision in the PrimeCell peripheral ID registers. Since the platform is aware of the actual silicon revision we need to hard-code the periphid from the platform, bumping the subrevision field to 1. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: 6828/1: mach-ux500: delete SSP PrimeCell IDLinus Walleij
This is redundant. The correct ID number is right there in the hardware anyway. We will introduce a mechanism later to hard-code this for deviant cells. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-25Merge branch 'for-torvalds' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: voltage domain regulators for DB8500 cpufreq: make DB8500 cpufreq driver compile cpufreq: update DB8500 cpufreq driver mach-ux500: move CPUfreq driver to cpufreq subsystem mfd: add DB5500 PRCMU driver mfd: update DB8500 PRCMU driver mach-ux500: move the DB8500 PRCMU driver to MFD mach-ux500: make PRCMU base address dynamic mach-ux500: rename PRCMU driver per SoC mach-ux500: update ASIC version detection mach-ux500: update SoC and board IRQ handling mach-ux500: update the DB5500 register file mach-ux500: update the DB8500 register file
2011-05-25mach-ux500: set proper I2C platform data from MOP500sLinus Walleij
This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-24mach-ux500: voltage domain regulators for DB8500Bengt Jonsson
The DB8500 has ePOD:s (electronic power domains) which are possible to switch on/off to deactivate silicon blocks on the DB8500 SoC by cutting their power without retention. We model these as simple regulators with one bit on/off settings. Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: move CPUfreq driver to cpufreq subsystemLinus Walleij
As part of the ARM arch subsystem migration, move the DB8500 cpufreq driver to drivers/cpufreq as discussed with Dave Jones. The Makefile is not updated in order to avoid cross-subsystem conflicts for this file in merges. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mfd: add DB5500 PRCMU driverLinus Walleij
This adds the DB5500 PRCMU driver. Right now this one is pretty restricted in functionality, exposing a simple interface to send I2C messages. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mfd: update DB8500 PRCMU driverMattias Nilsson
This updates the DB8500 PRCMU driver to the latest version available internally. Nominally we would update the dependent CPUfreq driver at the same time but since that is being moved around in this patch set we postpone that by simply deactivating it for the time being. This is a snapshot of the current PRCMU firmware API as it looks right now. The PRCMU firmware is still subject to change. This also updates the CPUfreq driver to a newer version that will utilize the new API. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Sebastien Rault <sebastien.rault@stericsson.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: move the DB8500 PRCMU driver to MFDLinus Walleij
We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: make PRCMU base address dynamicLinus Walleij
This makes the PRCMU base address be selected at runtime for U8500 and U5500 instead of being compiled-in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: rename PRCMU driver per SoCLinus Walleij
This renames the prcmu.c file to prcmu-db8500.c so as to indicate that it is for this one SoC. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update ASIC version detectionLinus Walleij
This makes the core detect the DB8500 V2.0 and V2.1 ASICs, and add a convenience macro for "V2 or later". Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update SoC and board IRQ handlingRabin Vincent
This splits out a per-SoC IRQ range handling, so that the DB8500 and DB5500 SoC:s can reuse aproximately the same IRQ range with the largest span setting the roof. The same change is done for the boards, mutatis mutandis, with a new file for the U5500 board. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update the DB5500 register fileLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update the DB8500 register fileLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
2011-05-23Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23ARM: 6895/1: mach-ux500: fix SMP secondary startup regressionLinus Walleij
Commit e2a083dc0da9aa6437e14811198379b18cdfa7f8 "ARM: consolidate SMP cross call implementation" broke the ux500 compilation since the smp.h header declared a function called from headsmp.S. This fixes it up by declaring it locally instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: consolidate SMP cross call implementationRussell King
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-07Merge branch 'zImage_fixes' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-05-07ARM: zImage: remove the static qualifier from global data variablesNicolas Pitre
To be able to relocate the .bss section at run time independently from the rest of the code, we must make sure that no GOTOFF relocations are used with .bss symbols. This usually means that no global variables can be marked static unless they're also const. Let's remove the static qualifier from current offenders, or turn them into const variables when possible. Next commit will ensure the build fails if one of those is reintroduced due to otherwise enforced coding standards for the kernel. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com>
2011-04-26Merge branch 'master' into for-nextJiri Kosina
Fast-forwarded to current state of Linus' tree as there are patches to be applied for files that didn't exist on the old branch.
2011-04-20mach-ux500: fix i2c0 device setup regressionLinus Walleij
Adding two sets of I2C devices to the same bus doesn't quite work, atleast not anymore. Stash one array and determine how much of it shall be added instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-04-10treewide: Fix iomap resource size miscalculationsJoe Perches
Convert off-by-1 r->end - r->start to resource_size(r) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <florian@openwrt.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28mach-ux500: configure board for the TPS61052 regulator v2Linus Walleij
This registers the TPS61052 regulator to the ux500 MOP/HREF boards. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-28mach-ux500: provide ab8500 init vectorBengt Jonsson
This adds an ab8500 regulator initialization vector for the HREF/MOP500 series of boards. This also sets the display regulator to be on at boot so we don't loose our splash screen when the board comes up. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-28mach-ux500: board support for AB8500 GPIO driverBibek Basu
This is the board support patch for ab8500 gpio driver on mach-ux500.Patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Modify for header file placement] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-26regulator: initialization for ab8500 regulatorsBengt Jonsson
The regulators on the AB8500 have a lot of custom hardware control settings pertaining to 8 external signals, settings which are board-specific and need be provided from the platform at startup. Initialization added for regulators Vana, VextSupply1, VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout, Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ...
2011-03-20Merge branches 'fixes', 'pgt-next' and 'versatile' into develRussell King
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits) doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore Update cpuset info & webiste for cgroups dcdbas: force SMI to happen when expected arch/arm/Kconfig: remove one to many l's in the word. asm-generic/user.h: Fix spelling in comment drm: fix printk typo 'sracth' Remove one to many n's in a word Documentation/filesystems/romfs.txt: fixing link to genromfs drivers:scsi Change printk typo initate -> initiate serial, pch uart: Remove duplicate inclusion of linux/pci.h header fs/eventpoll.c: fix spelling mm: Fix out-of-date comments which refers non-existent functions drm: Fix printk typo 'failled' coh901318.c: Change initate to initiate. mbox-db5500.c Change initate to initiate. edac: correct i82975x error-info reported edac: correct i82975x mci initialisation edac: correct commented info fs: update comments to point correct document target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c ... Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-16Merge branch 'p2v' into develRussell King
Conflicts: arch/arm/kernel/module.c arch/arm/mach-s5pv210/sleep.S
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add hrefv60 GPIO pinsBibek Basu
This will centralize all GPIO pin muxing for the different boards in the MOP500 family to a single file. It also kills off the deprecated support for the ED (Early Drop) ASIC, this should never be spotted in the open and ST-Ericsson have internally deprecated this hardware. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Rebasing and kill old ASIC support] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: move MOP500 pins to separate fileRabin Vincent
Split off pin definitions for the MOP500 board family to its own file. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: support varying number of GPIOs per blockRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Added constant 32-pin assignment in platform data] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: config Ux500 PL011 PL022 PL180 for DMALinus Walleij
This will configure the platform data for the PL011, PL022 and PL180 (derivate) PrimeCells found in the Ux500 to use DMA with the generic DMA engine for DMA40. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db5500 devicesMian Yousaf Kaukab
- DMA tx and rx maps for usb channels are set to be configured at runtime - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db8500 devicesMian Yousaf Kaukab
- DMA tx and rx maps for usb channels are set to be configured at runtime - GPIO configurations for usb are added - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: update MUSB clock configurationsMian Yousaf Kaukab
MUSB driver has been updated to separate out BSP layer from its generic parts, as separate driver. This patch configures the clock with the new platform driver name. Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add platform data for musbMian Yousaf Kaukab
USB resources and DMA40 configurations are dynamically with the data provided in ux500_add_usb() call. Though only DMA40 configurations differ between U8500 and U5500 (USB resource are common between them). Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix inverted SD-card GPIO pinPhilippe Langlais
The levelshifter pins were set to inverted values, fix this up. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>