summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-mxc/Makefile
AgeCommit message (Collapse)Author
2009-05-07MXC: Add iomux support for MX35 SoCsSascha Hauer
This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27mxc: add arch_reset() functionIlya Yanok
This patch adds arch_reset() function for all mxc platforms. It also removes (unsused) arch/arm/mach-mx2/system.c file. This patch has been tested on i.MX1/27/31/35 Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add cpu_is_ macrosSascha Hauer
We had hardcoded cpu_is_ macros for mxc architectures till now. As we want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_ macros which expand to 0 or 1 if only one architecture is compiled in and only check for the cpu type if more than one architecture is compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add pwm driver for i.MX SoCsSascha Hauer
This driver has been tested on MX27/MX31. It should work on MX1/MX1 aswell, but the actual setting of the PWM is missing so far. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mxc-add-ARCH_MX1Paulius Zaleckas
Adds MX1 architecture to platform MXC. It will supersede mach-imx and let it die. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MX2: Add DMA support for mx2 and (eventually) mx1Sascha Hauer
This patch adds DMA support for Freescale i.MX27 SoCs. It is derived from the i.MX1 port and should (though currently untested) still be working for the i.MX1. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MXC: add convenience function to register platform devicesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX2 family: Add GPIO multiplexing supportJuergen Beisert
This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MXC family: Adding timer supportJuergen Beisert
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC arch: Add gpio support for the whole platformJuergen Beisert
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05MXC family: Add clock handlingJuergen Beisert
Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-03-31[ARM] 4877/1: i.MXC family: Clean up current platform codeRobert Schwebel
From: Juergen Beisert <j.beisert@pengutronix.de> This patch cleans up the in-kernel platform code from doxygen comments. We don't know how this could have leak in, but anyway. Changes since last release: - none Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Ross Wille <wille@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4461/1: MXC platform and i.MX31ADS core supportQuinn Jensen
This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>