summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-mxc/include/mach/common.h
AgeCommit message (Collapse)Author
2012-10-15ARM: imx: merge plat-mxc into mach-imxShawn Guo
It's really unnecessary to have plat-mxc, and let's merge it into mach-imx. It's pretty much just a bunch of file renaming and Kconfig/Makefile merge. To make the change less invasive, we keep using Kconfig symbol CONFIG_ARCH_MXC for mach-imx sub-architecture. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-22Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson
* multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-14ARM: SoC: convert imx6q to SMP operationsMarc Zyngier
Convert the imx6q platform to use struct smp_operations to provide its SMP and CPU hotplug operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-11ARM: imx51: decouple device tree boot from board filesShawn Guo
Now, imx51 device tree kernel calls pinctrl to set up pins. The function used to hook up non-DT pin setup is not needed for DT boot any more. Remove it from DT image. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11ARM: imx53: remove unneeded files and functionsShawn Guo
Now imx53 is a device tree only platform, so the files and functions used only by non-DT kernel can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11ARM: imx53: decouple device tree boot from board filesShawn Guo
Now, imx53 device tree kernel calls pinctrl to set up pins. The functions used to hook up non-DT pin setup is not needed for DT boot any more. Remove them from DT image. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-23Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc power management changes from Arnd Bergmann: "These are various power management related changes, mainly concerning cpuidle on i.MX and OMAP, as well as a the move of the omap smartreflex driver to live in the power subsystem." Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h} * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge ARM: OMAP2+: do not allow SmartReflex to be built as a module ARM: OMAP2: Use hwmod to initialize mmc for 2420 ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state ARM: OMAP3: PM: cleanup cam_pwrdm leftovers ARM: OMAP3: PM: call pre/post transition per powerdomain ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux ARM: OMAP3+: PRM: Enable IO wake up ARM: OMAP4: PRM: Add IO Daisychain support ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file ARM: OMAP3: PM: correct enable/disable of daisy io chain ARM: OMAP2+: PRM: fix compile for OMAP4-only build W1: OMAP HDQ1W: use runtime PM ARM: OMAP2+: HDQ1W: use omap_device W1: OMAP HDQ1W: use 32-bit register accesses W1: OMAP HDQ1W: allow driver to be built on all OMAP2+ ...
2012-07-10ARM i.MX31: Add devicetree supportDenis 'GNUtoo' Carikli
This patch adds basic devicetree support for i.MX31 based SoCs. Only the UART and interrupts bindings are added. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-06-30Merge branch 'imx/cpuidle' into next/pmOlof Johansson
* imx/cpuidle: ARM: imx: Add imx6q cpuidle driver ARM: imx: Add imx5 cpuidle ARM: imx: Add common imx cpuidle init functionality. ARM: imx: Enable imx53 low power idle ARM: imx: clean and consolidate imx5 suspend and idle code ARM: imx: Add comments to tzic_enable_waker() ARM: imx: Modify IMX_IO_P2V macro Resolved trivial context conflict in arch/arm/plat-mxc/include/mach/common.h Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-07Merge tag 'imx-clk-common-fixes' of ↵Olof Johansson
git://git.pengutronix.de/git/imx/linux-2.6 into fixes From Sascha Hauer: "Some fixes for the fresh i.MX common clock support" Resolved trivial conflict in arch/arm/plat-mxc/include/mach/common.h. * tag 'imx-clk-common-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx6q: prepare and enable init on clks directly instead of clk_get first ARM i.MX: remove now unnecessary argument from mxc_timer_init ARM: i.MX: change timer clock from ipg to perclk ARM i.MX5: fix gpt peripheral clock path Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-05ARM: imx: Enable imx53 low power idleRobert Lee
Add various functionality needed to enable a imx53 low power idle state. This includes adding the imx53 gpc_dvfs clock and making a common imx5_late_init function and initializing all imx53 MACHINE_STATE late_init calls to imx5_late_init. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-06-05ARM: imx: clean and consolidate imx5 suspend and idle codeRobert Lee
The imx5 idle code that existed in mm-imx5.c is moved to pm-imx5.c. The imx5_pm_init call is now exported and called during the MACHINE_START late_init in supported imx5 platforms. Remove various enabling/disabling of the gpc_dvfs clock and enable it once during initialization. This is a very low power clock that must be enabled during low power operations. There are only two "suspend_state_t" imx5 low power modes ever used. STOP_POWER_OFF for suspend to mem and WAIT_UNCLOCKED_POWER_OFF for idle and suspend to standby. The latter mode only requires 500 nanoseconds of extra hardware exit time beyond a basic WFI operation (WAIT_CLOCKED mode) so no other idle mode is necessary. Given this information, it is more efficient to keep the registers in the often used WAIT_UNCLOCKED_POWER_OFF state and only to and from the STOP_POWER_OFF register state as needed when suspend to mem is required. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-16ARM i.MX: remove now unnecessary argument from mxc_timer_initSascha Hauer
As the timer code now does a clk_get to get its clock we don't need the struct clk argument anymore. This also changes the alternative EPIT timer to do a clk_get. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-02ARM: mx3: Setup AIPS registersFabio Estevam
It was observed on a mx31pdk board that audio playback only worked when the bootloader was Redboot, and did not work when U-boot was used. Comparing the sources of these bootloaders showed that the AIPS registers were not setup in U-boot. Instead of relying on the bootloader to setup the AIPS registers, do it in the kernel so that audio playback can work independantly of the bootloader being used. Copied the AIPS settings from Redboot to the kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-02ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFIFabio Estevam
The LPM field of register CCMR is used to select the mode that the processor will run when it goes to WFI. When mx31 enters in WFI mode the LPM field is at its reset value of 0, which configures the mx31 to enter in "wait mode". On mx35, the LPM field on mx35 is also at 0 after reset, which corresponds to "run mode" instead of "wait mode". Instead of relying on the reset value of LPM to set the low power mode for WFI, configure mx31 and mx35 to run in "wait mode" Reported-by: Benoit Thebaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29ARM i.MX27: Add devicetree supportSascha Hauer
This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-09Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
power management changes for omap and imx A significant part of the changes for these two platforms went into power management, so they are split out into a separate branch. * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1 ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation ARM: imx6q: resume PL310 only when CACHE_L2X0 defined ARM: imx6q: build pm code only when CONFIG_PM selected ARM: mx5: use generic irq chip pm interface for pm functions on ARM: omap: pass minimal SoC/board data for UART from dt arm/dts: Add minimal device tree support for omap2420 and omap2430 omap-serial: Add minimal device tree support omap-serial: Use default clock speed (48Mhz) if not specified omap-serial: Get rid of all pdev->id usage ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init ARM: OMAP4: PRM: use PRCM interrupt handler ARM: OMAP3: pm: use prcm chain handler ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad ARM: OMAP2+: mux: add support for PAD wakeup interrupts ARM: OMAP: PRCM: add suspend prepare / finish support ARM: OMAP: PRCM: add support for chain interrupt handler ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list ...
2012-01-05Merge branch 'restart' into for-linusRussell King
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: 7198/1: arm/imx6: add restart support for imx6qShawn Guo
The restart support was missed from the initial imx6q submission. The mxc_restart() does not work for imx6q. Instead, this patch adds the restart for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: mxc: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-03Merge branch 'imx6/pm' into next/pmArnd Bergmann
* imx6/pm: ARM: imx6q: resume PL310 only when CACHE_L2X0 defined ARM: imx6q: build pm code only when CONFIG_PM selected ARM: mx5: use generic irq chip pm interface for pm functions on
2011-12-26ARM: imx6q: build pm code only when CONFIG_PM selectedEric Miao
Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-05Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-11-23Merge branch 'imx-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into fixes
2011-11-17ARM: imx6q: move clock register map to machine_desc.map_ioRichard Zhao
map_io is the only place to call iotable_init. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> [shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-15ARM: imx: convert smp platforms to global gic_handle_irq()Marc Zyngier
Convert the SMP imx platforms to use the global gic_handle_irq() function instead a private function. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-15ARM: mxc: rename gic_handle_irq to avoid name clashMarc Zyngier
Before introducing a global gic_handle_irq(), rename MXC's version to mxc_gic_handle_irq(). This function will be removed altogether in a later patch. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-11arm/imx: remove imx_idle hook and use pm_idle insteadShawn Guo
The patch removes imx_idle hook and use pm_idle instead to get imx arch_idle prepared for the cleanup. It's suggested by Russel King as below. > The final removal of mach/system.h depends on getting rid of the arch_idle > thing. While going through these headers, I was dismayed to find these: > > arch/arm/mach-s3c2410/include/mach/system.h:void (*s3c24xx_idle)(void); > arch/arm/plat-mxc/include/mach/system.h:extern void (*imx_idle)(void); > > when we have a perfectly good pm_idle hook already in place - so there's > no excuse for these especially when other platforms are already using > pm_idle to hook their platform specific idle function into. This is > something that better be gone at the next merge window! Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-02Merge branch 'imx/imx6q' into next/socArnd Bergmann
Conflicts: Documentation/devicetree/bindings/arm/fsl.txt arch/arm/Kconfig arch/arm/Kconfig.debug arch/arm/plat-mxc/include/mach/common.h
2011-11-01Merge branch 'imx/devel' into next/dtArnd Bergmann
The board changes in the imx/devel branch conflict with other changes in the device imx/dt branch. Conflicts: arch/arm/mach-mx5/board-mx53_loco.c arch/arm/mach-mx5/board-mx53_smd.c arch/arm/plat-mxc/include/mach/common.h arch/arm/plat-mxc/include/mach/memory.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31arm/imx6q: add suspend/resume supportShawn Guo
It adds suspend/resume support for imx6q. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31arm/imx6q: add device tree machine supportShawn Guo
It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31arm/imx6q: add smp and cpu hotplug supportShawn Guo
It adds smp and cpu hotplug support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31arm/imx: add gic_handle_irq functionShawn Guo
This is a plain translation of assembly gic irq handler to C function for CONFIG_MULTI_IRQ_HANDLER support on imx family. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-18arm/mx5: add device tree support for imx51 babbageShawn Guo
It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-18arm/mx5: add device tree support for imx53 boardsShawn Guo
It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-07Merge branch 'imx/cleanup' into imx/develArnd Bergmann
This helps resolve the conflicts between the imx cleanups and the new code that has gone into the imx tree. Conflict resolution was originally done by Sascha Hauer. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-04Merge branches 'cleanups/mx3-mm-v2' and 'cleanups/mxs' into imx-cleanupSascha Hauer
2011-10-04arm/imx: remove cpu_is_xxx() from arch_idle()Shawn Guo
This patch adds an idle hook imx_idle to be called in arch_idle(). Any soc that needs a customized idle implementation other than cpu_do_idle() can set up this hook in soc specific call. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-29Merge branches 'features/assorted', 'features/imx-pata' and ↵Sascha Hauer
'features/imx-multi-irq-v2' into imx-features Conflicts: arch/arm/plat-mxc/avic.c arch/arm/plat-mxc/include/mach/common.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-26ARM i.MX tzic: add handle_irq functionSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-26ARM i.MX avic: add handle_irq functionSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-26ARM: imx: Introduce generic function for displaying silicon revisionFabio Estevam
Currently each i.MX processor has its own function for displaying the silicon revision. Introduce a generic function for this purpose, so that all i.MX processors can reuse it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-01ARM: mxc: drop now unused function mxc_register_deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-07-08gpio/mxc: get rid of the uses of cpu_is_mx()Shawn Guo
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the different gpio types, IMX1_GPIO on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other i.mx SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06gpio/mxc: Change gpio-mxc into an upstanding gpio driverShawn Guo
The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-19ARM: remove support for mxc91231Uwe Kleine-König
Since support for mxc91231 was introduced 2009 it only saw patches that were part of (mxc or arm) global cleanups. The only supported machine only had 4 devices (2x UART, sdhc, watchdog). Cc: Dmitriy Taychenachev <dimichxp@gmail.com> LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: mx53: Print silicon revision on bootFabio Estevam
Having the silicon revision to appear on the boot log is a useful information. MX31, MX35 and MX51 already show the silicon revision on boot. Add support for displaying such information for MX53 as well. Tested on a mx53loco board, where it shows: CPU identified as i.MX53, silicon rev 2.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> LAKML-Reference: 1301068367-18937-1-git-send-email-fabio.estevam@freescale.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-09-27 01:32:48 +0000