summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-mxc/include/mach/iomux-mx53.h
AgeCommit message (Collapse)Author
2012-09-11ARM: imx53: remove unneeded files and functionsShawn Guo
Now imx53 is a device tree only platform, so the files and functions used only by non-DT kernel can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and ↵Lothar Waßmann
MX53_PAD_GPIO_8__CAN1_RXCAN MX53_PAD_EIM_D28__I2C1_SDA uses an undefined PAD_CTRL_I2C MX53_PAD_GPIO_8__CAN1_RXCAN has an incorrect input_select value Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-17ARM: i.MX53: clean up iomux-mx53.hTroy Kisky
Delete about 1,000 symbols used only once I used the following script to clean up the file. cp iomux-mx53.h iomux-mx53.h.cpy sed -n iomux-mx53.h.cpy \ -e 's/#define[ \x09]\+\(_MX5[0-9a-zA-Z_]*\)[ \x09]\+\(.\+\)/s@\1@\2@g/p' >t.tmp sed iomux-mx53.h.cpy \ -e '/define[ \x09]\+_MX5/d' \ -f t.tmp \ -e 's/,[ \x09]*\([^,]\+\)/, \1/g' \ -e 's/, 0)[ \x09]*|[ \x09]*MUX_PAD_CTRL(/, /' \ -e 's/(IOMUX_PAD(\(.*\)))/IOMUX_PAD(\1)/' \ -e 's/0x\([0-9a-fA-F]\{2\}\)[ \x09]*,/0x0\1,/' \ -e 's/NON_PAD_I/__NA_/' \ -e 's/0x0,/__NA_,/' \ -e 's/#define[ \x09]\+\(MX5[0-9a-zA-Z_]*\)[ \x09]\+\(IOMUX_PAD.\+\)/#define \1\x09\2/' \ -e 's/\(#define MX5[^\x09]\{5,12\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\x09\x09\2/' \ -e 's/\(#define MX5[^\x09]\{13,20\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\x09\2/' \ -e 's/\(#define MX5[^\x09]\{21,28\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\2/' \ -e 's/\(#define MX5[^\x09]\{29,36\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\2/' \ -e 's/\(#define MX5[^\x09]\{45,\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\\\n\x09\x09\x09\x09\x09\x09\x09\2/' \ -e 's/, IOMUX_CONFIG_SION,/, 0 | IOMUX_CONFIG_SION,/' >iomux-mx53.h Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-08Merge commit 'v3.1-rc1' into imx-fixesSascha Hauer
2011-07-26ARM: mx53: add pad configuration for I2C signalsEric Miao
I2C signals SDA/SCL are a bit different, they need to be pull-up and open-drain (so to support multiple I2C devices). Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-15Merge branch 'fixes-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into imx/fixes
2011-07-15ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/ctsTroy Kisky
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-15ARM: i.MX53: UARTn_CTS pin should not change RTS input selectTroy Kisky
If both the RTS pad and CTS pad definitions setup IOMUXC_UARTn_IPP_UART_RTS_MUX_SELECT_INPUT, then the order of setup will matter. We don't want that. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-15ARM: i.MX53: UARTn_TXD pin should not change RXD input selectTroy Kisky
If both the RXD pad and TXD pad definitions setup IOMUXC_UARTn_IPP_UART_RXD_MUX_SELECT_INPUT, then the order of setup will matter. We don't want that. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-15iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitionsLothar Waßmann
The I2C controller requires the SION bit to be set on SDA and SCL pins. This is missing on some pad definitions for the I2C function. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: i.MX53: Fix IOMUX type o'sTroy Kisky
", o" was used for ", 0" ", 17" was used for ", 7 | 0x10" Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6Fabio Estevam
MX53_PAD_PATA_DATA6 can have the following alternate modes: PATA_DATA_6: mode 0 GPIO2_6: mode 1 EMI_NANDF_D_6: mode 3 ESDHC4_DAT6 mode 4 GPU3d_GPU_DEBUG_OUT_6 mode 5 IPU_DIAG_BUS_6 mode 6 Fix the modes accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dinh Nguyen <dinh.nguyen@freescale.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28ARM: imx53: add sdhc pad settingsRichard Zhu
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: i.MX53: Add full iomux support for mx53Dinh Nguyen
This iomux file contains all the available pins that are iomux capable. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: i.MX53: add IOMUX pad for ecspiYong Shen
Add IOMUX pad entry for ecspi Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07arm: mxc: move IOMUX_CONFIG_SION definition to iomux-v3.hRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04ARM i.MX53: Make MX53 EVK bootableYong Shen
1. Add entries to Kconfig 2. Add machine definition 3. Add Uart platform data, pad setting and base address 4. Adjust GPIO irq number Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: imx: Add core definitions for MX53Dinh Nguyen
Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-22 19:14:49 +0000