summaryrefslogtreecommitdiffstats
path: root/arch/arm64/mm/dma-mapping.c
AgeCommit message (Collapse)Author
2014-05-09arm64: Clean up the default pgprot settingCatalin Marinas
The primary aim of this patchset is to remove the pgprot_default and prot_sect_default global variables and rely strictly on predefined values. The original goal was to be able to run SMP kernels on UP hardware by not setting the Shareability bit. However, it is unlikely to see UP ARMv8 hardware and even if we do, the Shareability bit is no longer assumed to disable cacheable accesses. A side effect is that the device mappings now have the Shareability attribute set. The hardware, however, should ignore it since Device accesses are always Outer Shareable. Following the removal of the two global variables, there is some PROT_* macro reshuffling and cleanup, including the __PAGE_* macros (replaced by PAGE_*). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com>
2014-05-03arm64: Use bus notifiers to set per-device coherent DMA opsCatalin Marinas
Recently, the default DMA ops have been changed to non-coherent for alignment with 32-bit ARM platforms (and DT files). This patch adds bus notifiers to be able to set the coherent DMA ops (with no cache maintenance) for devices explicitly marked as coherent via the "dma-coherent" DT property. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-03arm64: Make default dma_ops to be noncoherentRitesh Harjani
Currently arm64 dma_ops is by default made coherent which makes it opposite in default policy from arm. Make default dma_ops to be noncoherent (same as arm), as currently there aren't any dma-capable drivers which assumes coherent ops Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-24arm64: Remove pgprot_dmacoherent()Catalin Marinas
Since this macro is identical to pgprot_writecombine() and is only used in a single place, remove it completely to avoid confusion. On ARMv7+ processors, the coherent DMA mapping must be Normal NonCacheable (a.k.a. writecombine) to avoid mismatched hardware attribute aliases (with the kernel linear mapping as Normal Cacheable). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-24arm64: Support DMA_ATTR_WRITE_COMBINELaura Abbott
DMA_ATTR_WRITE_COMBINE is currently ignored. Set the pgprot appropriately for non coherent opperations. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-24arm64: Implement custom mmap functions for dma mappingLaura Abbott
The current dma_ops do not specify an mmap function so maping falls back to the default implementation. There are at least two issues with using the default implementation: 1) The pgprot is always pgprot_noncached (strongly ordered) memory even with coherent operations 2) dma_common_mmap calls virt_to_page on the remapped non-coherent address which leads to invalid memory being mapped. Fix both these issue by implementing a custom mmap function which correctly accounts for remapped addresses and sets vm_pg_prot appropriately. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> [catalin.marinas@arm.com: replaced "arm64_" with "__" prefix for consistency] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-27arm64: Implement coherent DMA API based on swiotlbCatalin Marinas
This patch adds support for DMA API cache maintenance on SoCs without hardware device cache coherency. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-27arm64: Use swiotlb late initialisationCatalin Marinas
Since arm64 does not support ISA, there is no need for early swiotlb initialisation. This patch switches the DMA mapping code to swiotlb_tlb_late_init_with_default_size(). A side effect of this is that GFP_DMA is used for the swiotlb buffer and devices with a 32-bit coherent mask are correctly supported. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-27arm64: Replace ZONE_DMA32 with ZONE_DMACatalin Marinas
On arm64 we do not have two DMA zones, so it does not make sense to implement ZONE_DMA32. This patch changes ZONE_DMA32 with ZONE_DMA, the latter covering 32-bit dma address space to honour GFP_DMA allocations. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-26arm64: Change misleading function names in dma-mappingRitesh Harjani
arm64_swiotlb_alloc/free_coherent name can be misleading somtimes with CMA support being enabled after this patch (c2104debc235b745265b64d610237a6833fd53) Change this name to be more generic: __dma_alloc/free_coherent Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> [catalin.marinas@arm.com: renamed arm64_swiotlb_dma_ops to coherent_swiotlb_dma_ops] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-05arm64: Align CMA sizes to PAGE_SIZELaura Abbott
dma_alloc_from_contiguous takes number of pages for a size. Align up the dma size passed in to page size to avoid truncation and allocation failures on sizes less than PAGE_SIZE. Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-12-19arm64: Enable CMALaura Abbott
arm64 bit targets need the features CMA provides. Add the appropriate hooks, header files, and Kconfig to allow this to happen. Cc: Will Deacon <will.deacon@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-12-19arm64: Warn on NULL device structure for dma APIsLaura Abbott
Although parts of the DMA apis may properly check for NULL devices, there may be some places that don't. Rather than fix up all the possible locations, just require a non-NULL device structure to be used for allocating/freeing. Cc: Will Deacon <will.deacon@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> [catalin.marinas@arm.com: s/WARN/WARN_ONCE/] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-08arm64: Call swiotlb_init() instead of swiotlb_init_with_default_size()Catalin Marinas
Following commit 74838b7 (swiotlb: add the late swiotlb initialization function with iotlb memory) the swiotlb_init_with_default_size() is a static function. This patch changes the arm64 code to call swiotlb_init() instead and use the default size of 64MB. It is assumed that AArch64 platforms have enough RAM to afford the pre-allocated swiotlb memory. It also removes the #ifdef around this call since CONFIG_SWIOTLB is always enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-09-17arm64: DMA mapping APICatalin Marinas
This patch adds support for the DMA mapping API. It uses dma_map_ops for flexibility and it currently supports swiotlb. This patch could be simplified further if the DMA accesses are coherent (not mandated by the architecture) or if corresponding hooks are placed in the generic swiotlb code to deal with cache maintenance. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>