summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-05-08ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabledCatalin Marinas
The patch adds the ENDPROC declarations for the __copy_to_user_std and __clear_user_std functions. Without these, the compiler generates BXL to ARM when compiling the kernel in Thumb-2 mode. Reported-by: Kyungmin Park <kmpark@infradead.org> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMPCatalin Marinas
The standard I-cache Invalidate All (ICIALLU) and Branch Predication Invalidate All (BPIALL) operations are not automatically broadcast to the other CPUs in an ARMv7 MP system. The patch adds the Inner Shareable variants, ICIALLUIS and BPIALLIS, if ARMv7 and SMP. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache opsCatalin Marinas
The Snoop Control Unit on the ARM11MPCore hardware does not detect the cache operations and the dma_cache_maint*() functions may leave stale cache entries on other CPUs. The solution implemented in this patch performs a Read or Write For Ownership in the ARMv6 DMA cache maintenance functions. These LDR/STR instructions change the cache line state to shared or exclusive so that the cache maintenance operation has the desired effect. Tested-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6106/1: Implement copy_to_user_page() for noMMUCatalin Marinas
Commit 7959722 introduced calls to copy_(to|from)_user_page() from access_process_vm() in mm/nommu.c. The copy_to_user_page() was not implemented on noMMU ARM. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.cCatalin Marinas
Commit 31aa8fd6 introduced the __arm_ioremap_caller() function but the nommu.c version did not have the _caller suffix. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-07Merge branch 'v4l_for_2.6.34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
2010-05-06V4L/DVB: mx1-camera: compile fixUwe Kleine-König
This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-05-06[ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.hJakob Viketoft
The use of mfp_cfg_t causes build errors without including <mach/mfp.h>. CC: stable@kernel.org CC: Daniel Mack <daniel@caiaq.de> Signed-off-by: Jakob Viketoft <jakob.viketoft@bitsim.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/spitz: fix On/off key name to fix warning during bootPavel Machek
On/Off contains slash in the name, which causes warning during boot. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: fix the incorrect cpu_is_pxa950()Haojian Zhuang
Fix the wrong variable used in cpu_is_pxa950(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: update cpuid pattern for pxa9xx in head.SHaojian Zhuang
Update CPUID pattern of PXA9xx in head.S and fix the duplicate entries for pxa935. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/viper: fix timeout usage for I2CWolfram Sang
The timeout value is in jiffies, so it should be using HZ, not a plain number. Assume with HZ=100 '100' means 1s here and adapt accordingly. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Shen <paul.shen@marvell.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/raumfeld: fix button nameDaniel Mack
"on/off button" was recently renamed to remove the slash character. Follow that change in the pin polarity detection as well. While at it, fix another cosmetic coding style flaw as well. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/imote2: Fix iMote2 defconfigStefan Schmidt
- Bring in a CMDLINE that actually works and prints to the right tty - Compile-in JFFS2 to boot into rootfs - Remove unneeded options for Bluetooth and radio - Disable CPU_FREQ as it makes the flash driver fail Thanks Jonathan for spotting what I messed up. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: add missing new line to regs-u2d.hIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-04ARM: 6093/1: Fix kernel memory printing for sparsememCatalin Marinas
The show_mem() and mem_init() function are assuming that the page map is contiguous and calculates the start and end page of a bank using (map + pfn). This fails with SPARSEMEM where pfn_to_page() must be used. Tested-by: Will Deacon <Will.Deacon@arm.com> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-03Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-05-01arch/arm/include/asm/elf.h: forward-declare the task-structAndrew Morton
iop32x_defconfig: In file included from include/linux/elf.h:7, from kernel/elfcore.c:1: arch/arm/include/asm/elf.h:101: warning: "struct task_struct" declared inside parameter list arch/arm/include/asm/elf.h:101: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01arch/arm/plat-pxa/dma.c: correct NULL testJulia Lawall
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6076/1: SA1100: add processor check to sa1110-cpufreq driverDmitry Artamonow
Just to make sure that this driver won't run on StrongArm SA1100 when both SA1100 and SA1110 cpufreq drivers are built in (usually in multimachine config). SA1100 driver already has similar check. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6075/1: SA1100: fix wrong CPU type for h3100 and h3600Dmitry Artamonow
They have StrongARM SA1110, not SA1100. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6066/1: Fix "BUG: scheduling while atomic: swapper/0/0x00000002Santosh Shilimkar
This patch fixes the preempt leak in the cpuidle path invoked from cpu-hotplug. The fix is suggested by Russell King and is based on x86 idea of calling init_idle() on the idle task when it's re-used which also resets the preempt count amongst other things dump: BUG: scheduling while atomic: swapper/0/0x00000002 Modules linked in: Backtrace: [<c0024f90>] (dump_backtrace+0x0/0x110) from [<c0173bc4>] (dump_stack+0x18/0x1c) r7:c02149e4 r6:c033df00 r5:c7836000 r4:00000000 [<c0173bac>] (dump_stack+0x0/0x1c) from [<c003b4f0>] (__schedule_bug+0x60/0x70) [<c003b490>] (__schedule_bug+0x0/0x70) from [<c0174214>] (schedule+0x98/0x7b8) r5:c7836000 r4:c7836000 [<c017417c>] (schedule+0x0/0x7b8) from [<c00228c4>] (cpu_idle+0xb4/0xd4) # [<c0022810>] (cpu_idle+0x0/0xd4) from [<c0171dd8>] (secondary_start_kernel+0xe0/0xf0) r5:c7836000 r4:c0205f40 [<c0171cf8>] (secondary_start_kernel+0x0/0xf0) from [<c002d57c>] (prm_rmw_mod_reg_bits+0x88/0xa4) r7:c02149e4 r6:00000001 r5:00000001 r4:c7836000 Backtrace aborted due to bad frame pointer <c7837fbc> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6068/1: Fix build break with KPROBES enabledSantosh Shilimkar
With CONFIG_KPROBES enabled two section are getting created which leads to below build break. LOG: AS arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:431: Error: symbol ret_from_exception is in a different section arch/arm/kernel/entry-armv.S:490: Error: symbol ret_from_exception is in a different section arch/arm/kernel/entry-armv.S:491: Error: symbol __und_usr_unknown is in a different section This was introduced by commit 4260415f6a3b92c5c986398d96c314df37a4ccbf Reported-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-30musb: fix power field to hold all possible valuesAjay Kumar Gupta
MUSB can supply upto 500mA such as, AM3517 and OMAP3EVM Rev >=E and thus the 'power' field has to hold values above 255. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
2010-04-28ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIBColin Tuckley
The switch to using GPIOLIB broke the sd/mmc card detection on the RealView development boards if GPIO_PL061 was not selected. This patch selects GPIO_PL061 if GPIOLIB is selected. The sense of the return value from mmc_status has also changed and is corrected. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits) omap: delete unused bootloader tag variables omap: Devkit8000: Remove unused pins omap: Devkit8000: Change position of init calls omap: Devkit8000: Remove unnecessary include file omap: Devkit8000: Fix typo in pin name omap: Devkit8000: Add missing package selection omap: Devkit8000: Fix typo in supplies n8x0_defconfig: remove CONFIG_NILFS2_FS override omap: board-sdp-flash.c: Fix typos in debug output omap4: Fix McBSP4 base address omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options omap: rx51_defconfig: Remove duplicate phonet omap: fix a gpmc nand problem AM3517: initialize i2c subsystem after mux subsystem omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled OMAP4: Clocks: Change SPI Instance Names omap: Devkit8000: Fix wrong usb port on Devkit8000 OMAP4: Fix for CONTROL register Base OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base ...
2010-04-23omap: delete unused bootloader tag variablesAaro Koskinen
They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unused pinsThomas Weber
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Change position of init callsThomas Weber
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unnecessary include fileThomas Weber
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in pin nameThomas Weber
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Add missing package selectionThomas Weber
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in suppliesThomas Weber
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber
Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap4: Fix McBSP4 base addressSantosh Shilimkar
This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula
Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix a gpmc nand problemstanley.miao
If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23AM3517: initialize i2c subsystem after mux subsystemstanley.miao
The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao
INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao
If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Clocks: Change SPI Instance NamesAbraham Arce
Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Fix for CONTROL register BaseSantosh Shilimkar
This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala
This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>