summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-09-09ARM: Partially revert "Auto calculate ZRELADDR and provide option for ↵Russell King
exceptions" Partially revert e69edc7, which introduced automatic zreladdr support. The change in the way the manual definition is defined seems to be error and conflict prone. Go back to the original way we were handling this for the time being, while keeping the automatic zreladdr facility. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09Merge branch 'origin'Russell King
2010-09-08ARM: Ensure PTE modifications via dma_alloc_coherent are visibleRussell King
Dave Hylands reports: | We've observed a problem with dma_alloc_writecombine when the system | is under heavy load (heavy bus traffic). We've managed to reduce the | problem to the following snippet, which is run from a kthread in a | continuous loop: | | void *virtAddr; | dma_addr_t physAddr; | unsigned int numBytes = 256; | | for (;;) { | virtAddr = dma_alloc_writecombine(NULL, | numBytes, &physAddr, GFP_KERNEL); | if (virtAddr == NULL) { | printk(KERN_ERR "Running out of memory\n"); | break; | } | | /* access DMA memory allocated */ | tmp = virtAddr; | *tmp = 0x77; | | /* free DMA memory */ | dma_free_writecombine(NULL, | numBytes, virtAddr, physAddr); | | ...sleep here... | } | | By itself, the code will run forever with no issues. However, as we | increase our bus traffic (typically using DMA) then the *tmp = 0x77 | line will eventually cause a page fault. If we add a small delay (a | few microseconds) before the *tmp = 0x77, then we don't see a page | fault, even under heavy load. A dsb() is required after modifying the PTE entries to ensure that they will always be visible. Add this dsb(). Reported-by: Dave Hylands <dhylands@gmail.com> Tested-by: Dave Hylands <dhylands@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08ARM: 6359/1: ep93xx: move clock initialization earlierMika Westerberg
Commit 7cfe24947 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") changed AMBA bus to handle the PCLK automatically. However, in EP93xx clock initialization is arch_initcall which is done later than AMBA device identification. This causes amba_get_enable_pclk() to fail resulting device where UARTs are not functional. So change ep93xx_clock_init() to be postcore_initcall. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"Russell King
This reverts commit 4fa5518, which causes a compilation regression for IXP4xx platforms. Reported-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6352/1: perf: fix event validationWill Deacon
The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Reported-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7Catalin Marinas
CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01[ARM] tegra: Add ZRELADDR default for ARCH_TEGRAErik Gilling
fixes the warning: .config:369:warning: symbol value '' invalid for ZRELADDR and the prompt for ZRELADDR on make Signed-off-by: Erik Gilling <konkers@android.com>
2010-09-01Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-09-01Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-01Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King
2010-09-01ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARMMikael Pettersson
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on ARM. The only non-trivial issue here is the u64 argument to sys_fanotify_mark(), but it is the 3rd argument and thus passed in r2/r3 in both kernel and user space, so it causes no problems. Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine. Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01ARM: 6330/1: perf: reword comments relating to perf_event_do_pendingWill Deacon
This is purely a cosmetic change to the ARM perf backend because the current comments about the relationship between NMIs, interrupt context and perf_event_do_pending are misleading. This patch updates the comments so that they reflect what the code actually does (which is in line with other architectures). Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-30ARM: pxa: Make id const in pwm_probe()Uwe Kleine-König
This fixes the compiler warning: arch/arm/plat-pxa/pwm.c: In function 'pwm_probe': arch/arm/plat-pxa/pwm.c:179: warning: initialization discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300Axel Lin
According to PXA3xx Processor Family Developer Manuall Vol1. section "Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52 is CI_VSYNC. This patch fixes the MFP defines and also corrects the order of MFD defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: remove __init from cpufreq_driver->init()Eric Miao
This is causing section mismatches when linking, as cpufreq_driver->init() is not supposed to be in init section. Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-28Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV310: Fix on Secondary CPU startup ARM: S5PV310: Bug fix on uclk1 and sclk_pwm ARM: S5PV310: Fix missed uart clocks ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll ARM: S5PV310: Fix on PLL setting for S5PV310 ARM: S5PV310: Add CMU block for S5PV310 Clock ARM: S5PV310: Fix on typo irqs.h of S5PV310 ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310 ARM: S5PV310: Fix on GPIO base addresses ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type ARM: S5P: VMALLOC_END should be unsigned long
2010-08-28Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: VMALLOC_END should be unsigned long arm: tegra: fix compilation of board-harmony.c
2010-08-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: PM: ensure IO wakeups are properly disabled omap: Fix omap_4430sdp_defconfig for make oldconfig omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq omap: Fix sev instruction usage for multi-omap OMAP3: Fix a cpu type check problem omap3: id: fix 3630 rev detection
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-27ARM: S5PV310: Fix on Secondary CPU startupChanghwan Youn
Following occurs on boot message without this patch. CPU1: processor failed to boot Brought up 1 CPUs SMP: Total of 1 processors activated... This patch adds SYSRAM mapping for fixing Secondary CPU startup. CPU1: Booted secondary processor Brought up 2 CPUs SMP: Total of 2 processors activated... Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Bug fix on uclk1 and sclk_pwmJongpill Lee
This patch fixes on enable and ctrlbit of uclk1 and sclk_pwm. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix missed uart clocksJongpill Lee
This patch adds missed uart clocks for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apllJongpill Lee
This patch adds clk_sclk_apll so that fixes on clk_mout_apll. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on PLL setting for S5PV310Jongpill Lee
This patch fixes on PLL setting for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Add CMU block for S5PV310 ClockKukjin Kim
This patch adds CMU block for S5PV310/S5PC210 clock. (CMU: Clock Management Unit) Of course, changed current clock addresses for it together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on typo irqs.h of S5PV310Kukjin Kim
This patch fixes typo 'IRQ_WTD' in the irqs.h of S5PV310. And minor update comments. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310Kukjin Kim
This patch adds default zreladdr of ARCH_S5PV310. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on GPIO base addressesKyungmin Park
The S5PV310/S5PC210 has following three GPIO base addresses. Part1 Base Address=0x11400000 Part2 Base Address=0x11000000 Part3 Base Address=0x03860000 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor edit of title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END typeKukjin Kim
Fix this warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' And removes the useless parens and white space. Reported-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-08-23ARM: imx: fix build failure concerning otg/ulpiUwe Kleine-König
The build failure was introduced by 13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23ARM: S5P: VMALLOC_END should be unsigned longKyungmin Park
Silences following build warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-22arm: tegra: VMALLOC_END should be unsigned longOlof Johansson
Silences following build warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@google.com>
2010-08-22arm: tegra: fix compilation of board-harmony.cOlof Johansson
The patch "ARM: Remove DISCONTIGMEM support" removed the node id from the meminfo struct and the PHYS_TO_NID macro, causing compilation errors: arch/arm/mach-tegra/board-harmony.c: In function 'tegra_harmony_fixup': arch/arm/mach-tegra/board-harmony.c:94: error: 'struct membank' has no member named 'node' arch/arm/mach-tegra/board-harmony.c:94: error: implicit declaration of function 'PHYS_TO_NID' arch/arm/mach-tegra/board-harmony.c:97: error: 'struct membank' has no member named 'node' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@google.com>
2010-08-21ARM: imx: set cache line size to 64 bytes for i.MX5Jason Wang
The core of i.MX5 series is cortex-A8, its cache line size is 64 bytes instead of 32 bytes. Refer to the OMAP3's selection, we choose 64 bytes for i.MX5, this can increase a little bit performance when perform cache operations. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-21mx5/clock: fix clear bit fields issue in _clk_ccgr_disable functionJason Wang
We can see MXC_CCM_CCGRx_MOD_OFF is defined as 0 while MXC_CCM_CCGRx_CG_MASK is defined as 0x3 in crm_regs.h, here in the _clk_ccgr_disable function, we want to clear the corresponding enable bit fields to disable this clock, so we should choose MASK instead of OFF otherwise clocks can't be disabled. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-21mxc/tzic: add base address when accessing TZIC registersJason Wang
When we call tzic_enable_wake function, the kernel will crash because of access to an unmapped address. This is because two register access operations forgot to add base address. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-20s5pc110: SDHCI-s3c can override host capabilitiesKyungmin Park
Each board can override the default sdhci host capabilities. Some board has broken features by hardwares and support 8-bit bandwidth. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20ARM: mach-shmobile: ap4evb: fix write protect for SDHI1Arnd Hannemann
SDHI1 on AP4EVB has no pin to detect write protection of a card. This had the result that a card inserted in this slot was always detected as read only. This patch adds the corresponding flag to disable write protection detection for SDHI1. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-19Input: sysrq - drop tty argument from sysrq ops handlersDmitry Torokhov
Noone is using tty argument so let's get rid of it. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-18ARM: mach-shmobile: ap4evb: modify FSI2 IDKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-18ARM: mach-shmobile: do not enable the PLLC2 clock on initGuennadi Liakhovetski
AP4EVB has to reparent PLLC2 to provide a precise HDMI clock, this is only possible, if PLLC2 hasn't been enabled yet. Since no other driver currently uses PLLC2 we can safely remove the CLK_ENABLE_ON_INIT flag. This fixes the "Cannot set PLLC2 parent: -16, 1 users" error message, when trying to use HDMI on AP4EVB. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-18ARM: mach-shmobile: Clock framework comment fixMagnus Damm
Update clock framework header comment for SH-Mobile ARM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: amba clcd: don't disable an already disabled clock ARM: Tighten check for allowable CPSR values ARM: 6329/1: wire up sys_accept4() on ARM ARM: 6328/1: Build with -fno-dwarf2-cfi-asm ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used
2010-08-17Make do_execve() take a const filename pointerDavid Howells
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17clock-imx35: Calculate the base clock rate for the IPU unitJuergen Beisert
The mx3fb driver needs the clock the IPU runs in order to calculate the divider for the LCD clock. This patch adds the clock rate calculation routine for the i.MX35 CPU. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-17clock-imx35: correct arm and ahb clock calculationMarc Kleine-Budde
According to the Datasheet: "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual, Rev. 2" "Figure 14-24. Clock Control And Gating" change the result of get_rate_ahb based on the frequency returned by get_rate_arm to calculate the proper rate. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-17clock-imx35: fix divider if ahb is source for ipg_perMarc Kleine-Budde
According to the Datasheet: "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual, Rev. 2" "Table 14-6. PDR0 Field Descriptions" the divider is CCM_PER_AHB[3:0] + 1. This patch adds the missing + 1. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-17i.MX35: remove get_3_3_div helper functionSascha Hauer
In the v2 reference manual there are no dividers combined of two dividers. Instead, all dividers are simple 6bit dividers. I assume the combined dividers only exist in preliminary hardware. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-17mx35: Fix boot ROM hang in internal boot modeHans J. Koch
If a watchdog reset occurs after booting in internal boot mode, the i.MX35 won't boot anymore. The boot ROM code seems to assume that some clocks are turned on (they are after a power-on reset). This patch turns on the necessary clocks. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: John Ogness <jogness@linutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 15:07:45 +0000