summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-03-02[ARM] pxa: add support for Embedian MXM-8x10Edwin Peer
Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: move board board IRQ definitions out of irqs.hEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] sa1111: allow cascaded IRQs to be used by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: allow cascaded IRQ base to be specified by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: remove unused IRQs and avoid unnecessary cascadeEric Miao
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*. IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as IRQ_LOCOMO_KEY. IRQ_LOCOMO_GPIO and the demultiplex handler should really be living somewhere else. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: avoid unnecessary cascaded keyboard IRQEric Miao
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced locomokbd_{open,close} for masking/unmasking of the keyboard IRQ. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] sa1100: remove unreferenced IRQ definitionsEric Miao
These IRQ definitions related to LOCOMO are never referenced anywhere, thus could be safely removed. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/tosa: make use of the matrix keypad driverEric Miao
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registersEric Miao
Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: add the missing AC97 pin configurationsEric Miao
Missing AC97 pin configurations are added where pxa_set_ac97_info() are called for all pxa25x/pxa27x platforms. Where no exact configuration is provided, use the default as in sound/arm/pxa2xx-ac97-lib.c Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()Eric Miao
This is really pxa27x specific and should be kept in pxa27x.c. With this newly introduced function, the original set_resetgpio_mode() is deprecated. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: simplify the LCD pin configuration for pxa27x platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: simplify the LCD pin configuration for pxa25x platformsEric Miao
There are only limited possible LCD pin configurations for pxa25x platforms, simplify this by macro. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: use chip->ack() instead of accessing GEDR directlyEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-01Merge with mainline to remove plat-omap/Kconfig conflictTony Lindgren
Conflicts: arch/arm/plat-omap/Kconfig
2010-03-01Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits) DaVinci DM365: Adding support for SPI EEPROM DaVinci DM365: Adding DM365 SPI support DaVinci DM355: Modifications to DM355 SPI support DaVinci: SPI: Adding header file for SPI support. davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table() DaVinci: DM365: Voice codec support for the DM365 SoC davinci: clock: let clk->set_rate function sleep Add SDA and SCL pin numbers to i2c platform data davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 davinci: build list of unused EDMA events dynamically davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case davinci: Keep count of channel controllers on a platform davinci: Correct return value of edma_alloc_channel api davinci: add CDCE949 support on DM6467 EVM davinci: add support for CDCE949 clock synthesizer davinci: da850/omap-l138 EVM: register for suspend support davinci: da850/omap-l138: add support for SoC suspend davinci: add power management support DaVinci: DM365: Changing default queue for DM365. ...
2010-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits) Input: atkbd - release previously reserved keycodes 248 - 254 Input: add KEY_WPS_BUTTON definition Input: ads7846 - add regulator support Input: winbond-cir - fix suspend/resume Input: gamecon - use pr_err() and friends Input: gamecon - constify some of the setup structures Input: gamecon - simplify pad type handling Input: gamecon - simplify coordinate calculation for PSX Input: gamecon - fix some formatting issues Input: gamecon - add rumble support for N64 pads Input: wacom - add device type to device name string Input: s3c24xx_ts - report touch only when stylus is down Input: s3c24xx_ts - re-enable IRQ on resume Input: wacom - constify product features data Input: wacom - use per-device instance of wacom_features Input: sh_keysc - enable building on SH-Mobile ARM Input: wacom - get features from driver info Input: rotary-encoder - set gpio direction for each requested gpio Input: sh_keysc - update the driver with mode 6 Input: sh_keysc - switch to using bitmaps ...
2010-03-01DaVinci DM365: Adding support for SPI EEPROMSandeep Paulraj
The DM365 Spectrum Digital EVM comes with an EEPROM connected to SPI0. This patch adds support for the SPI EEPROM. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci DM365: Adding DM365 SPI supportSandeep Paulraj
This patch adds SPI init for DM365. It does the following 1) Initializes SPI0 2) Defines resources to be used by SPI0 3) Adds platform data for SPI0 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci DM355: Modifications to DM355 SPI supportSandeep Paulraj
This patch does the following 1) Minor change to the SPI clocks making it similar to DM365. 2) Changing the interrupt used by SPI0 3) Adding EDMA resources that can be used by SPI0 4) Adding platform specific data. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci: SPI: Adding header file for SPI support.Sandeep Paulraj
This patch adds "spi.h" header file that will be used by board and architecture specific code. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookupKevin Hilman
Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup' and use clk_lookup directly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits) ARM: Eliminate decompressor -Dstatic= PIC hack ARM: 5958/1: ARM: U300: fix inverted clk round rate ARM: 5956/1: misplaced parentheses ARM: 5955/1: ep93xx: move timer defines into core.c and document ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c ARM: 5953/1: ep93xx: fix broken build of clock.c ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig ARM: 5949/1: NUC900 add gpio virtual memory map ARM: 5948/1: Enable timer0 to time4 clock support for nuc910 ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk ARM: make_coherent(): fix problems with highpte, part 2 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself ARM: 5945/1: ep93xx: include correct irq.h in core.c ARM: 5933/1: amba-pl011: support hardware flow control ARM: 5930/1: Add PKMAP area description to memory.txt. ARM: 5929/1: Add checks to detect overlap of memory regions. ARM: 5928/1: Change type of VMALLOC_END to unsigned long. ARM: 5927/1: Make delimiters of DMA area globally visibly. ARM: 5926/1: Add "Virtual kernel memory..." printout. ARM: 5920/1: OMAP4: Enable L2 Cache ... Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (252 commits) ASoC: Check progress when reporting periods from i.MX FIQ handler ASoC: Remove a unused variables from i.MX FIQ runtime data ALSA: hda - Add/fix ALC269 FSC and Quanta models ALSA: hda - Add ALC670 codec support OMAP4: PMIC: Add support for twl6030 codec ALSA: hda - remove unnecessary msleep on power state transitions usb/gadget/{f_audio,gmidi}.c: follow recent changes in audio.h ASoC: fsi: Modify over/under run error settlement ASoC: OMAP4: Add McPDM platform driver ASoC: OMAP4: Add support for McPDM ASoC: OMAP: data_type and sync_mode configurable in audio dma ALSA: hda - Add missing description in HD-Audio-Models.txt ALSA: add support for Macbook Air 2,1 internal speaker ALSA: usbaudio: consolidate header files ALSA: usbmixer: bail out early when parsing audio class v2 descriptors ALSA: usbaudio: implement basic set of class v2.0 parser ALSA: usbaudio: introduce new types for audio class v2 ALSA: usbaudio: parse USB descriptors with structs ALSA: hda - enable snoop for Intel Cougar Point ALSA: hda - Remove identical definitions for macmini3 model ...
2010-03-01Merge branch 'topic/asoc' into for-linusTakashi Iwai
2010-02-28iop-adma: redundant/wrong tests in iop_*_count()?Roel Kluin
When we reach the loop, len is at least 1, we only stay in the loop when len is at least MAX_BYTE_COUNT + 1, MAX_BYTE_COUNT is subtracted in each iteration. So when we leave the loop, or didn't take it, len is at least 1. Testing whether len is non-zero appears redundant. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-viptLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt: xfs: fix xfs to work with Virtually Indexed architectures sh: add mm API for DMA to vmalloc/vmap areas arm: add mm API for DMA to vmalloc/vmap areas parisc: add mm API for DMA to vmalloc/vmap areas mm: add coherence API for DMA to vmalloc/vmap areas
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-26omap2: Initialize Menelaus and MMC for N8X0Tony Lindgren
Initialize MMC for N8X0 Based on an earlier patches from Nokia released kernel sources at: http://repository.maemo.org/pool/os2008/free/source/k/kernel-source-rx-34/ Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-26V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26pxa_camera: remove init() callbackAntonio Ospite
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or even to request GPIOs to be used by the camera *sensor*. These initializations can be performed statically in machine init functions. The current semantics for this init() callback is ambiguous anyways, it is invoked in pxa_camera_activate(), hence at device node open, but its users use it like a generic initialization to be done at module init time (configure MFP, request GPIOs for *sensor* control). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: vpfe-capture: converting ccdc drivers to platform-driversMuralidharan Karicheri
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26ARM: Fix decompressor's kernel size estimation for ROM=yRussell King
Commit 2552fc2 changed the way the decompressor decides if it is safe to decompress the kernel directly to its final location. Unfortunately, it took the top of the compressed data as being the stack pointer, which it is for ROM=n cases. However, for ROM=y, the stack pointer is not relevant, and results in the wrong answer. Fix this by explicitly storing the end of the biggybacked data in the decompressor, and use that to calculate the compressed image size. CC: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-25AM3517 EVM: correct typo - tca6416 mispelt as tca6516Sriram
Correct instances where tca6416 is misspelt as tca6516 in the board-am3517evm file. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM3517 EVM: Enable I2C supportSriram
There are multiple devices connected to I2C bus on AM3517EVM (for instance audio codec, IO expander etc). Enable I2C support in the default kernel configuration for AM3517 EVM. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM35x: Enable OMAP_MUX in defconfigAjay Kumar Gupta
Enabling OMAP_MUX in defconfig as it is required for EHCI to work. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM35x: Add missing GPIO mux config for EHCI portAjay Kumar Gupta
Adding GPIO mux config used for PHY reset of EHCI port on base board. We get below failure message without this patch, "hub 1-0:1.0: unable to enumerate USB device on port 1" Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25Zoom3: Defconfig updatemanjugk manjugk
Some of the features are not enabled by default in zoom3 defconfig. This patch enables: - MMC Resume - TWL4030 RTC driver - Debug File system Build and boot tested on Zoom3 board. Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25omap: i2c: Fix muxing for command line enabled busJarkko Nikula
The commit b63128e81214cc2db2995d690438055c26d213a5 broke the pin muxing for I2C busses that are enabled from the kernel command line. Fix this by defining the board registration function omap_register_i2c_bus in common platform code as it was before but keep the muxing in architecture dependent files. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25Merge branches 'clks' and 'pnx' into develRussell King
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-25Merge branch 'perf' into develRussell King
Conflicts: arch/arm/Kconfig
2010-02-25Merge branch 'tmpreg' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-25Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', ↵Russell King
'pending-dma-streaming', 'u300' and 'umc' into devel
2010-02-25Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King
2010-02-25ARM: Eliminate decompressor -Dstatic= PIC hackRussell King
We used to build decompressors with -Dstatic= to avoid any local data being generated. The problem is that local data generates GOTOFF relocations, which means we can't relocate the data relative to the text segment. Global data, on the other hand, goes through the GOT, and can be relocated anywhere. Unfortunately, with the new decompressors, this presents a problem since they declare static data within functions, and this leads to stack overflow. Fix this by separating out the decompressor code into a separate file, and removing 'static' from BSS data in misc.c. Also, discard the .data section - this means that should we end up with read/write initialized data, the decompressor will fail to link and the problem will be obvious. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-25OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helperTomi Valkeinen
Add dsi_vc_dcs_read_2() helper function to read two bytes from the DSI peripheral. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-25Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Uwe Kleine-König
imx/master Removed selection of COMMON_CLKDEV by CONFIG_ARCH_MX5. This is handled in 03e09cd8902717b66f940357257d8ad76114d9f2. arch/arm/plat-mxc/iomux-mx1-mx2.c was moved to arch/arm/plat-mxc/iomux-v1.c in 5e2e95f520538e095d10456acd28d9107317aa32 and got bug fixed in 5c17ef878fa25e04b1e8f1d8f5fa8b267753472c. The bug in arch/arm/plat-mxc/iomux-v1.c isn't present any more since bac3fcfad565c9bbceeed8b607f140c29df97355, so arch/arm/plat-mxc/iomux-mx1-mx2.c is simply deleted. Conflicts: arch/arm/plat-mxc/Kconfig arch/arm/plat-mxc/Makefile arch/arm/plat-mxc/iomux-mx1-mx2.c Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-25ARM: mach-shmobile: ap4evb: Add KEYSC supportKuninori Morimoto
Because AP4 board has capacitor for KEYSC, we need much time for waiting. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 22:27:05 +0000