summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-08-05[ARM] pxa/z2: Fix flash layout typoMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/spitz: Formating and naming fixesMarek Vasut
Improve formating so checkpatch passes. Also, change some function and variable names to make the naming consistent. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/spitz: Rework spitzMarek Vasut
This huge patch mostly shuffles code. The spitz.c file contained terrible mess and needed a cleanup, here it is: 1) Made every part modular, components are not built in if not selected. 2) Removed loads of preprocessor goo, mostly "#ifdef MACH_AKITA .... #endif" and similar code. The kernel size will grow by a few kb now, but the file is much more readable. 3) Reworked SD/CF power setting function and made it reentrant. 4) Add ISL6271A regulator support 5) Correctly register WM8750 Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27xMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/palm: Introduce Palm27xMarek Vasut
This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa: removed mostly unused and confusing two sharpsl.hEric Miao
Only a small part of used code is moved into sharpsl_pm.h. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: use generic gpio_get_value() instead of READ_GPIO_BIT()Eric Miao
READ_GPIO_BIT() is no way generic by accessing GPIO registers directly, replace it with gpio_get_value(). Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/corgi: remove unused declarations of corgiscoop_deviceEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/spitz: remove unused declarationsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: removing dead IDE_PXA_CFChristoph Egger
IDE_PXA_CF doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Juergen Schindele <schindele@nentec.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: removing dead XSCALE_CACHE_ERRATAChristoph Egger
XSCALE_CACHE_ERRATA doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: removing dead CORGI_SSP_DEPRECATEDChristoph Egger
CORGI_SSP_DEPRECATED doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: removing dead ARCH_GUMSTIX_ORIGChristoph Egger
ARCH_GUMSTIX_ORIG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: removing dead BACKLIGHT_CORGIChristoph Egger
BACKLIGHT_CORGI was later renamed to BACKLIGHT_GENERIC and has not been used since then. As it's now safe to completely transition to LCD_CORGI driver, which incorprates both the LCD and backlight device. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: replacing dead SHARPSL_LOCOMO with SHARP_LOCOMOChristoph Egger
SHARP_LOCOMO doesn't exist in Kconfig, therefore replacing all references for it with SHARP_LOCOMO in the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routineMarek Vasut
This patch: 1) Simpifies the DRI recomputation routine by pulling out the common code 2) Fixes a bug in PXA27x DRI recomputation caused by incorrect parenthesis Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: fix HSIO bus x24 multiplier for pxa3xxMarek Vasut
The latest PXA3xx DM has enabled 312MHz for the HSS bus, which allows x24 multiplier. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] scoop: Add CPR register bit definitionsMarek Vasut
Add bit definitions of the CPR register of the SCOOP chip into scoop.h. Also, cleanup the GPCR definitions to match coding style. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/colibri320: Add UDC supportMarek Vasut
Add support for PXA UDC. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/z2: Add regulator supportMarek Vasut
Register TPS65021 regulator in Zipit Z2. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: PXA_SHARPSL_DETECT_MACH_ID to include head-sharpsl.SEric Miao
With kexec-based kernel boot loader on Zaurus, the machine ID is actually correctly passed, and head-sharpsl.S is not necessary. Introduce PXA_SHARPSL_DETECT_MACH_ID, and include head-sharpsl.S only when that's explicitly enabled. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: move hidden Kconfig options to right place and vice versaEric Miao
1. TOSA related un-hidden options moved to right under MACH_TOSA 2. SHARPSL_PM related hidden options moved to the end of Kconfig Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: remove now unnecessary dma_needs_bounce()Eric Miao
With a correct dev->dma_mask before calling dmabounce_register_dev(), dma_needs_bounce() is not necessary. The sa1111, though, is a bit complicated. Until it's fully understood and fixed, dma_needs_bounce() for sa1111 is kept if CONFIG_SA1111 is enabled with no side effect (with the condition of machine_is_*) Thanks for Mike Rapoport to fix one error in the original version of the patch and get this tested. Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: merge all eseries board code into eseries.cEric Miao
Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: move pmu device back into mach-pxa/Eric Miao
Not tested and enabled on MMP at this moment, and since the IRQ is different from mach-pxa, I'd prefer to move the PMU device back into mach-pxa/. Will introduce the PMU device to MMP once it's enabled and tested. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/cm-x300: enable the IRQ_WAKEUP0 as wakeup source.Igor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: add set_type to the pxa3xx ext_wakeup irq chip.Igor Grinberg
pxa3xx cpu needs the irq type setup to be able to wakeup from low power mode on IRQ_WAKEUPx events. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: merge stargate2 and imote2 board filesJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: fix all devices using wm97xx_batt.hMarek Vasut
This file is scheduled for removal, therefore fix all devices that use this file to use the suggested wm97xx.h and pass platform data properly. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Tomas Cech <sleep_walker@suse.cz> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add() Input: cy8ctmg110 - capacitive touchscreen support Input: keyboard - also match braille-only keyboards Input: adp5588-keys - export unused GPIO pins Input: xpad - add product ID for Hori Fighting Stick EX2 Input: adxl34x - fix leak and use after free Input: samsung-keypad - Add samsung keypad driver Input: i8042 - reset keyboard controller wehen resuming from S2R Input: synaptics - set min/max for finger width Input: synaptics - only report width on hardware that supports it Input: evdev - signal that device is writable in evdev_poll() Input: mousedev - signal that device is writable in mousedev_poll() Input: change input handlers to use bool when possible Input: document the MT event slot protocol Input: introduce MT event slots Input: usbtouchscreen - implement reset_resume Input: usbtouchscreen - implement runtime power management Input: usbtouchscreen - implement basic suspend/resume Input: Add ATMEL QT602240 touchscreen driver Input: fix signedness warning in input_set_keycode() ...
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-08-04Merge branch 'v2.6.35-omap-mailbox-for-next' of ↵Tony Lindgren
git://gitorious.org/~doyu/lk/mainline into omap-for-linus Conflicts: arch/arm/mach-omap1/devices.c
2010-08-04omap: mailbox: reorganize headersFelipe Contreras
Remove kernel.h and module.h since they are not used correctly anyway. Also, remove device.h since it comes along with platform_device.h (always will I guess). Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: standarize on 'omap-mailbox'Felipe Contreras
omap{1,2}-mailbox are modules that provide the 'omap-mailbox' driver. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: only compile for configured archsFelipe Contreras
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: simplify omap_mbox_register()Felipe Contreras
No need to dynamically register mailboxes one by one. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: reorganize registeringFelipe Contreras
It's more extensible this way. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: add IRQ namesFelipe Contreras
Will be useful to identify them later. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: remove unecessary fieldsFelipe Contreras
Nobody is using them. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: don't export unecessary symbolsFelipe Contreras
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: update omap1 probingFelipe Contreras
Based on omap2 code. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: use correct config for omap1Felipe Contreras
CONFIG_OMAP_DSP is not in mainline, CONFIG_OMAP_MBOX_FWK is. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: 2420 should be detected at run-timeFelipe Contreras
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: reorganize structuresFelipe Contreras
OMAP4 ones messed up the organization. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: trivial cleanupsFelipe Contreras
And fix a few compilation warnings. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap mailbox: Set a device in logical mbox instance for traceabilityHiroshi DOYU
With this patch, you'll get the following sysfs directories. This structure implies that a single platform device, "omap2-mailbox" holds multiple logical mbox instances. This could be the base to add sysfs files for each logical mboxes. Then userland application can access a mbox through sysfs entries if necessary(ex: setting kfifo size dynamically) ~# tree -d -L 2 /sys/devices/platform/omap2-mailbox/ /sys/devices/platform/omap2-mailbox/ |-- driver -> ../../../bus/platform/drivers/omap2-mailbox |-- mbox | |-- dsp <- they are each instances of logical mailbox. | |-- ducati | |-- iva2 | |-- mbox01 | |-- mbox02 | |-- mbox03 | |-- ..... | `-- tesla |-- power `-- subsystem -> ../../../bus/platform This was wrongly dropped by: commit c7c158e57bce6220644f2bcd65d82e1468aa40ec Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: convert block api to kfifoOhad Ben-Cohen
The underlying buffering implementation of mailbox is converted from block API to kfifo due to the simplicity and speed of kfifo. The default size of the kfifo buffer is set to 256 bytes. This value is configurable at compile time (via CONFIG_OMAP_MBOX_KFIFO_SIZE), and can be changed at runtime (via the mbox_kfifo_size module parameter). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: remove (un)likely macros from cold pathsOhad Ben-Cohen
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox cleanup: split MODULE_AUTHOR lineOhad Ben-Cohen
use multiple MODULE_AUTHOR lines for multiple authors Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 01:34:08 +0000