summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-01-12ARM: mach-shmobile: sh7377 Enable SDIO IRQsMagnus Damm
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7377 aka G4 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. The G4EVM specific SDHI platform data is also updated to flag SDIO capabilities. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7367 Enable SDIO IRQsMagnus Damm
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7367 aka G3 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7372 Enable SDIO IRQsArnd Hannemann
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure interrupts are handled announce the MMC_CAP_SDIO_IRQ capability on AP4EVB. Tested with a b43-based SDIO wireless card. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: SAMSUNG: Add support for clock debugging through debug-fs interfaceAmit Daniel Kachhap
This patch adds support for clock information exposed to debug-fs interface. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> [kgene.kim@samsung.com: removed useless empty lines] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-11omap3: beaglexm: fix power on of DVIKoen Kooi
TFP410 DVI chip is used to provide display out. This chip is controlled by 2 lines: LDO which supplies the power is controlled over gpio + 2 and the enable of the chip itself is done over gpio + 1 NOTE: the LDO is necessary for LED, serial blocks as well. gpio + 1 was used to sense USB overcurrent in vanilla beagle. Without this fix, the display would not function as the LDO remains shut down. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-11omap3: igep3: Add omap_reserve functionalityEnric Balletbo i Serra
This patch adds omap_reserve functionality to board-igep0030.c. This patch is in similar lines to commit id 71ee7dad9b6991, from Russell king Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-11omap3: beaglexm: fix DVI reset GPIOKoen Kooi
GPIO reset line for Beagle XM is different from vanilla beagle so we populate it as part of gpio update routine. This in part fixes the issue of display not functioning on beagle XM platform. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-11omap3: beaglexm: fix EHCI power up GPIO dirKoen Kooi
EHCI enable power pin is inverted (active high) in comparison to vanilla beagle which is active low. Handle this case conditionally. Without this fix, Beagle XM 4 port EHCI will not function and no networking will be available [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (39 commits) mmc: davinci: add support for SDIO irq handling mmc: fix division by zero in MMC core mmc: tmio_mmc: fix CMD irq handling mmc: tmio_mmc: handle missing HW interrupts mfd: sh_mobile_sdhi: activate SDIO IRQ for tmio_mmc mmc: tmio_mmc: implement SDIO IRQ support mfd: sdhi: require the tmio-mmc driver to bounce unaligned buffers mmc: tmio_mmc: silence compiler warnings mmc: tmio_mmc: implement a bounce buffer for unaligned DMA mmc: tmio_mmc: merge the private header into the driver mmc: tmio_mmc: fix PIO fallback on DMA descriptor allocation failure mmc: tmio_mmc: allow multi-element scatter-gather lists mmc: Register debugfs dir before calling card probe function. mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK. mmc: Explain why we make adjacent mmc_bus_{put,get} calls during rescan. mmc: Fix sd/sdio/mmc initialization frequency retries mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap mmc: dw_mmc: Add Synopsys DesignWare mmc host driver. mmc: add sdhci-tegra driver for Tegra SoCs mmc: sdhci: add quirk for max len ADMA descriptors ...
2011-01-11ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMUWill Deacon
When running without an MMU, we do not need to install a mapping for the vectors page. Attempting to do so causes a compile-time error because install_special_mapping is not defined. This patch adds compile-time guards to the vector mapping functions so that we can build nommu configurations once more. Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zeroRussell King
The purpose of the minsec argument is to prevent 64-bit math overflow when the number of cycles is multiplied up. However, the multipler is 32-bit, and in the sched_clock() case, the cycle counter is up to 32-bit as well. So the math can never overflow. With a value of 60, and clock rates greater than 71MHz, the calculated multiplier is unnecessarily reduced in value, which reduces accuracy by maybe 70ppt. It's almost not worth bothering with as the oscillator driving the counter won't be any more than 1ppm - unless you're using a rubidium lamp or caesium fountain frequency standard. So, set the minsec argument to zero. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11ARM: sched_clock: allow init_sched_clock() to be called earlyRussell King
sched_clock is supposed to be initialized early - in the recently added init_early platform hook. However, in doing so we end up calling mod_timer() before the timer lists are initialized, resulting in an oops. Split the initialization in two - the part which the platform calls early which starts things off. The addition of the timer can be delayed until after we have more of the kernel initialized - when the normal time sources are initialized. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11ARM: integrator: fix compile warning in cpu.cRussell King
Fix: arch/arm/mach-integrator/cpu.c: In function ■integrator_get■: arch/arm/mach-integrator/cpu.c:164: warning: ■vco.s■ may be used uninitialized in this function Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11ARM: mx28: add the second fec device registrationShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM: mx28: update clock and device name for dual fec supportShawn Guo
Change device name from "fec" to "imx28-fec", so that fec driver can distinguish mx28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM: twd: fix display of twd frequencyRussell King
The fraction of MHz was not being displayed correctly as the calculation was a factor of 10 out. Fix this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11ARM: imx/mx27_3ds: Add debug board supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM i.MX5 uart clock bug fixYong Shen
uart clk is from pll3 on mx53 instead of mx51 Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM i.MX53 enable spi on EVK boardYong Shen
1. some macro definitions fix 2. add platform data for spi device 3. register spi clocks Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM: mach-shmobile: mackerel: Add touchscreen ST1232 supportTony SIM
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: ap4eb: SCIF port for earlyprintk when using zbootSimon Horman
Initialise the SCIF serial port to allow earlyprintk output when using zboot. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: SCIF port for earlyprintk when using zbootSimon Horman
Initialise the SCIF serial port to allow earlyprintk output when using zboot. It is based on a very similar patched for AP4EB. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: Add support get_cd in CN23Yusuke Goda
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11Merge branch 'for-paul-38-rebased' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt
2011-01-10ARM: udelay: prevent math rounding resulting in short udelaysRussell King
We perform the microseconds to loops calculation using a number of multiplies and shift rights. Each shift right rounds down the resulting value, which can result in delays shorter than requested. Ensure that we always round up. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-10Merge branch 'for-torvalds' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ux500: allow 5500 and 8500 to be built together ux500: modem_irq is only for 5500 ux500: dynamic SOC detection ux500: rename MOP board Kconfig ux500: remove build-time changing macros
2011-01-10Merge branch 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: add SMP support for msm msm: hotplug: support cpu hotplug on msm msm: timer: SMP timer support for msm msm: scm-boot: Support for setting cold/warm boot addresses msm: Secure Channel Manager (SCM) support
2011-01-10omap3: igep2: Add keypad supportEnric Balletbo i Serra
Support twl4030 keypad and gpio keys on IGEP v2. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10omap3: igep3: Fix IGEP module second MMC channel power supplyEnric Balletbo i Serra
The second MMC channel (used by the WLAN/BT module) is not linked to power regulator. This causes the WLAN/BT module to fail being detected if CONFIG_REGULATOR_DUMMY is not set. This patch adds the two regulators that actually feed the WLAN/BT module (1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the second channel is properly detected. Also change vmmc1 to use symbolic names instead of direct device reference. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10omap3: igep3: Add USB EHCI support for IGEP moduleEnric Balletbo i Serra
The OMAP3 IGEP module has one EHCI interface on board using USB2HS port. GPIO183 is used as PHY reset. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10Merge branch 'ehci-omap-clock' into omap-fixesTony Lindgren
2011-01-10omap3: clocks: Fix build error 'CK_3430ES2' undeclared hereSantosh Shilimkar
At latest mainline commit 0c21e3aaf6a, omap2plus build is broken. This patch is trivial fix for the missed usb clock node for CK_3430ES2PLUS flag update. CHK include/generated/compile.h CC arch/arm/mach-omap2/clock3xxx_data.o arch/arm/mach-omap2/clock3xxx_data.c:3289: error: 'CK_3430ES2' undeclared here (not in a function) make[1]: *** [arch/arm/mach-omap2/clock3xxx_data.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated mask to include CK_36XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10arm: omap4: pandaboard: turn on PHY reference clock at initAnand Gadiyar
The SMSC 3320 USB PHY on the OMAP4 Pandaboard needs a 19.2 MHz reference clock. This clock is provided from the OMAP4's fref_clk3 pad. Recent changes to clock44xx_data.c made the clock framework aware of the existence of these fref_clk[i] lines. If the option CONFIG_OMAP_RESET_CLOCKS is enabled in the kernel, then the clock framework will turn these clocks off during bootup. Explicitly request and keep this clock enabled at init for the Pandaboard, so that the PHY receives this clock at all times. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10ux500: allow 5500 and 8500 to be built togetherRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: modem_irq is only for 5500Rabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Modified to hit the right file] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: dynamic SOC detectionRabin Vincent
Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: rename MOP board KconfigRabin Vincent
Rename the MOP board Kconfig entries to the same name as the machine type, so that the machine_is_*() macros work correctly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Updated to match changes in the tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: remove build-time changing macrosRabin Vincent
To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10headers: kobject.h reduxAlexey Dobriyan
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter, add new ↵Sumit Semwal
overlay manager. A panel connects to one of the overlay managers of DSS through some interface block. On OMAP4, specifying the type of the display is not sufficient to conclude which manager the panel should be connected to. Hence, a new member 'channel' is introduced in omap_dss_device structure to determine which manager the panel uses. The dss_recheck_connections() called in dss_driver_probe() uses this channel parameter to set the correct manager to the corresponding omap_dss_device. The channel parameter is used only once to ensure the correct managers are set for each panel. The parameter dssdev->manager->id will take care of ensuring that the panel and then the interface driver configures the correct DISPC channel. Also, add a new Overlay Manager in manager.c, make other changes needed for LCD2 channel. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: LCD2 Channel Changes for DISPCSumit Semwal
DISPC functions are modified in order to work when the manager is LCD2. This includes: Adding new IRQs specific to LCD2 and their handling. Provide dumps of the new manager's registers. Provide dumps of the new manager's clocks. Checks for channel for registers DISPC_CONTROL2 and DISPC_CONFIG2 which can't be parametrized. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Represent DISPC register defines with channel as parameterSumit Semwal
On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. There is a set of regsiters for LCD2 channel similar to the existing LCD channel, like DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so on. Introduce new enum members for LCD2 Channel and corresponding Overlay Manager in display.h. Represent the following DISPC register defines with channel as a parameter to differentiate between LCD and LCD2 registers (and also DIGIT in some cases): DISPC_DEFAULT_COLOR, DISPC_TRANS_COLOR, DISPC_TIMING_H, DISPC_TIMING_V, DISPC_POL_FREQ, DISPC_DIVISOR, DISPC_SIZE_LCD, DISPC_DATA_CYCLEk, DISPC_CPR_COEF_R, DISPC_CPR_COEF_G and DISPC_CPR_COEF_B This parametrization helps in reducing the number of register defines for DISPC. Replace the existing reads/writes to these registers in this new way. Also, Introduce defines for registers DISPC_CONTROL2 and DISPC_CONFIG2 which are used exclusively for LCD2 channel. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: use generic DPI panel driver in board filesBryan Wu
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight control driver code which will be moved out later. Then we can use generic DPI driver for sharp_ls_panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add generic DPI panel display driverBryan Wu
Generic DPI panel driver includes the driver and 4 similar panel configurations. It will match the panel name which is passed from platform data and setup the right configurations. With generic DPI panel driver, we can remove those 4 duplicated panel display drivers. In the future, it is simple for us just add new panel configuration date in panel-generic-dpi.c to support new display panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: Enable display on ZOOM2/3/3630SDPKishore Y
Enable Display on zoom2, zoom3 and 3630sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3Kishore Y
Board-zoom-display.c added as a common file for display functionality on boards zoom2, zoom3 and 3630sdp. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3630: DSS2: Enable Pre-Multiplied Alpha SupportRajkumar N
Enable dss to process color formats with pre-mulitplied alpha. With this we can have alpha values defined for each pixel and hence can have different blending values for each pixel. sysfs entry has been created for this and pre-multiplied alpha support is turned off by default. Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-08mmc: add sdhci-tegra driver for Tegra SoCsOlof Johansson
SDHCI driver for Tegra. This driver plugs in as a new variant of sdhci-pltfm, using the platform data structure passed in to specify the GPIOs to use for card detect, write protect and card power enablement. Original driver (of which only the header file is left): Signed-off-by: Yvonne Yip <y@palm.com> The rest, which has been rewritten by now: Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08ARM: dove: Switch SDHCI devices over to "sdhci-dove" driverMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Saeed Bishara <saeed@marvell.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-07Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 03:10:44 +0000