summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-12-23arm: omap: craneboard: Add USB EHCI supportSrinath
AM3517/05 Craneboard has one EHCI interface on board using port1. GPIO35 is used as power enable. GPIO38 is used as port1 PHY reset. History: http://marc.info/?l=linux-omap&w=2&r=1&s=Craneboard%253A%2BAdd%2BUSB%2BEHCI%2Bsupport&q=b Signed-off-by: Srinath <srinath@mistralsolutions.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-23ARM: S5PV310: Update Kconfig and Makefile for supporting CPUFREQSunyoung Kang
This patch adds ARCH_HAS_CPUFREQ in Kconfig of ARCH_S5PV310 and updates Makefile for supporting build S5PV310 CPUFREQ driver. Signed-off-by: Sunyoung Kang <sy0816.kang@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-23ARM: S5PV310: Add FOUT APLL get rate functionJaecheol Lee
FOUT APLL clock is used as a source of ARM core clock. So we need that the clock source can be changed dynamically by using CPUFREQ driver. This patch can give correct frequency when calling clk_get_rate() function. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangwook Ju <sw.ju@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-23ARM: S5PV310: Update CPUFREQSangwook Ju
This patch updates following of CPUFREQ. - Updated DVFS table and divider value - Added common function - Added some function for changing APLL and setting Signed-off-by: Sangwook Ju <sw.ju@samsung.com> Reviewed-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-23ARM: S5PV310: Add support CPUFREQSunyoung Kang
This patch adds support CPUFREQ driver for S5PV310 and S5PC210. This can support DVFS(Dynamic Voltage and Frequency Scaling). The voltage scaling depends on existence of regulator. Sigend-off-by: Sunyoung Kang <sy0816.kang@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-23ARM: S5PV310: Add DMC registers and map_descSunyoung Kang
This patch adds DMC io mapping for access it and adds registers. This is used in checking DRAM memory type. Signed-off-by: Sunyoung Kang <sy0816.kang@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-23ARM: S5PV310: Define missing CMU register for CPUFREQSangwook Ju
This patch adds missing CMU(Clock Management Unit) registers for updated S5PV310 CPUFREQ driver. Signed-off-by: Sangwook Ju <sw.ju@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-23ARM: S5PV310: Update CMU registers for CPUFREQSunyoung Kang
This patch adds CMU(Clock Management Unit) registers for S5PV310/S5PC210 CPUFREQ driver and modifies some register names according to datasheet. Signed-off-by: Sunyoung Kang <sy0816.kang@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-22omap2+: Initialize serial port for dynamic remuxing for n8x0Tony Lindgren
Use omap_serial_init_port so we can let the serial code handle the remuxing of the RX pads. Note that this patch alone is not enough and additional GPIO related patches are needed. Only initialize uart3_rx_irrx pin, the other uart pins can be stay static. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap2+: Add struct omap_board_data and use it for platform level serial initTony Lindgren
This is needed to pass board specific data such as pads used to the platform level driver init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap2+: Allow hwmod state changes to mux pads based on the state changesTony Lindgren
Allow hwmod state changes to mux pads based on the state changes. By default, only enable and disable the pads. In some rare cases dynamic remuxing for the idles states is needed, this can be done by passing the enable, idle, and off pads from board-*.c file along with OMAP_DEVICE_PAD_REMUX flag. Thanks to Paul Walmsley <paul@booyaka.com> for the comments on the hwmod related changes. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap2+: Add support for hwmod specific muxing of devicesTony Lindgren
This allows adding hwmod specific pads dynamically during the platform device init. Note that we don't currently have the hwmod specific signals listed in the hwmod data, but struct omap_hwmod_mux_info will make that possible if necessary. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap2+: Add omap_mux_get_by_nameTony Lindgren
Do this by splitting _omap_mux_init_signal as it already has most of the necessary features. Based on an earlier patch by Dan Murphy <dmurphy@ti.com>. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22OMAP2: PM: fix compile error when !CONFIG_SUSPENDKevin Hilman
When CONFIG_SUSPEND is not enabled, none of the system PM methods are used, so do not compile them in. Thanks to Charles Manning for reporting the problem and proposing an initial patch. Reported-by: Charles Manning <manningc2@actrix.gen.nz> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22Merge branch 'pm-sr' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-22Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable
2010-12-22Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-12-22ARM: versatile: convert sched_clock() to use new infrastructureRussell King
Convert versatile platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: orion: convert sched_clock() to use new infrastructureRussell King
Convert orion platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: omap: convert sched_clock() to use new infrastructureRussell King
Convert omap to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: nomadik: convert sched_clock() to use new infrastructureRussell King
Convert nomadik platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: iop: convert sched_clock() to use new infrastructureRussell King
Convert iop platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: u300: convert sched_clock() to use new infrastructureRussell King
Convert u300 to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: tegra: convert sched_clock() to use new infrastructureRussell King
Convert tegra to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: sa1100: convert sched_clock() to use new infrastructureRussell King
Convert sa1100 to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: pxa: convert sched_clock() to use new infrastructureRussell King
Convert pxa to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: mmp: convert sched_clock() to use new infrastructureRussell King
Convert mmp to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: ixp4xx: convert sched_clock() to use new infrastructureRussell King
Convert ixp4xx to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: sched_clock: provide common infrastructure for sched_clock()Russell King
Provide common sched_clock() infrastructure for platforms to use to create a 64-bit ns based sched_clock() implementation from a counter running at a non-variable clock rate. This implementation is based upon maintaining an epoch for the counter and an epoch for the nanosecond time. When we desire a sched_clock() time, we calculate the number of counter ticks since the last epoch update, convert this to nanoseconds and add to the epoch nanoseconds. We regularly refresh these epochs within the counter wrap interval. We perform a similar calculation as above, and store the new epochs. We read and write the epochs in such a way that sched_clock() can easily (and locklessly) detect when an update is in progress, and repeat the loading of these constants when they're known not to be stable. The one caveat is that sched_clock() is not called in the middle of an update. We achieve that by disabling IRQs. Finally, if the clock rate is known at compile time, the counter to ns conversion factors can be specified, allowing sched_clock() to be tightly optimized. We ensure that these factors are correct by providing an initialization function which performs a run-time check. Acked-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Tested-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: ensure all sched_clock() implementations are notrace markedRussell King
ftrace requires sched_clock() to be notrace. Ensure that all implementations are so marked. Also make sure that they include linux/sched.h Also ensure OMAP clocksource read functions are marked notrace as they're used for sched_clock() too. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: tegra: timer: Separate clocksource and sched_clockColin Cross
tegra_clocksource_read should not use cnt32_to_63, wrapping is already handled in the clocksource code. Move the cnt32_to_63 into the sched_clock function, and replace the use of clocksource mult and shift with a multiplication by 1000 to convert us to ns. Acked-by: John Stultz <johnstul@us.ibm.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: realview/versatile: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: stmp: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: orion: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: spear: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: nomadik: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: mxc: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: iop: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: nuc: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Wan zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: U300: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: tcc8k: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: SA11x0: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: s5pv310: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: PXA: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Tested-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: omap: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: ns9xxx: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: netx: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: MSM: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Tested-By: Jeff Ohlstein <johlstei@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: mmp: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: lpc32xx: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 00:27:19 +0000