summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-02-10ARM: mxc91231: use .init_early to initialize cpu typeUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxerUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxerUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx: use .init_early to initialize cpu type and reset addressUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx+mx3: convert to mc13xxx MFDDavid Jander
Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx3/mx31_3ds: fix compiler warning without CONFIG_USB_ULPIUwe Kleine-König
This fixes: arch/arm/mach-mx3/mach-mx31_3ds.c:249: warning: 'mx31_3ds_host2_init' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx/eukrea_mbimx27: fix compile warnings about unused variablesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-03ARM: mxs: dynamically register flexcan devices for mx28Marc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-03ARM: mxs: adjust flexcan clock definitionMarc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mx5/board-mx53_evk.c: Make UART1 functionalFabio Estevam
Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mx5/board-mx53_smd.c: Make UART1 functionalFabio Estevam
Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mach-mx5/board-mx53_loco: Remove unused UARTsFabio Estevam
On mx53_loco only UART1 is used and its signals go to connector J16. Remove UART2 and UART3 as they are not used on this board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mach-mx5/board-mx53_loco: Make UART1 functionalFabio Estevam
Fix IOMUX settings for UART1 and make UART1 functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mach-mx5: Fix build for mx53_loco and mx53_smdFabio Estevam
Commit 816ad74 (ARM: i.MX53: Add full iomux support for mx53) renamed some of the pad names. Make the changes accordingly so that mx53_loco and mx53_cmd can build without errors. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01plat-mxc: Provide irq_chip name for GPIO IRQsAlexander Stein
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31Merge branch 'imx-board-ifdefs' into imx-for-2.6.39Sascha Hauer
2011-01-28ARM: mach-mx3/mach-mx31_3ds: Remove unnecessary function for IO mappingFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-28ARM i.MX28: remove reserved register definesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-28ARM i.MX23: remove reserved register definesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-28ARM i.MX23/28: do not use complicated macros if not necessarySascha Hauer
Get rid of ## preprocessor construct where it only makes the code harder to read. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-28ARM i.MX23/28: deobfuscate gpio initializationSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-27ARM i.MX51 efikamx: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 cpuimx51: remove unnecessary CONFIG_SERIAL_8250 ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 mx51-3ds: remove unnecessary CONFIG_KEYBOARD_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 mx51 babbage: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 mx51 3ds: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX31 pcm037 eet: remove unnecessary CONFIG_SPI_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX27 eukrea mbimx27: remove unnecessary CONFIG_SPI_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX27 pca100: remove unnecessary CONFIG_SPI_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX31 mx31ads: remove unnecessary CONFIG_SERIAL_8250 ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX31 mx31ads: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX31 mx31ads: remove unnecessary CONFIG_I2C ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX35 pcm043: put usbh1 outside CONFIG_USB_ULPISascha Hauer
The usbh1 port of the pcm043 does not use ulpi, so put it outside the corresponding ifdefs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX35 pcm043: remove unnecessary CONFIG_I2C ifdefsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-26ARM: mxs: add initial pm supportShawn Guo
This is a very initial pm support and basically does nothing. With this pm support entry, drivers can start testing their own pm functions. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-25ARM MXS: Add auart platform support for i.MX28Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-25ARM: imx: Add initial support for IMX27IPCAM boardFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24ARM: mx5/mx51_3ds: Add watchdog supportDaiane Angolini
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: mxs/mx28evk: read fec mac address from ocotpShawn Guo
Read fec mac address from ocotp and save it into fec_platform_data mac field for fec driver to use. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: mxs: add ocotp read functionShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: mx5: Use dummy clock for the keypadFabio Estevam
Reuse dummy_clk for the imx-keypad device instead of using a dedicated kpp_clk. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: i.MX53: Add full iomux support for mx53Dinh Nguyen
This iomux file contains all the available pins that are iomux capable. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19Introduce VPR200 board.Marc Reilly
Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19arm: mx50_rdp: add i2c bus supportRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19arm: mx50_rdp: add fec supportRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19ARM i.MX50: Rename devices-mx50.hJason Liu
There are devices-imx51.h and devices-imx53.h under arch/arm/mach-mx5 directory. So, had better rename devices-mx50.h to devices-imx50.h to follow the same naming convention with imx51 and imx53 part. Signed-off-by: Jason Liu <r64343@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-18ARM: S5PV310: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5PV210: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6450: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6440: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-08 03:36:55 +0000