summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-12-30Merge branch 'next-s5p' into for-next-newKukjin Kim
2010-12-30Merge branch 'next-samsung' into for-next-newKukjin Kim
2010-12-30Merge branch 'next-samsung-asoc2' into for-next-newKukjin Kim
2010-12-30ARM: S5P: Add platform support for MIPI CSIS devicesSylwester Nawrocki
There may be up to two MIPI CSI slave interfaces depending on the SoC version. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Add resource definitions for MIPI CSISSylwester Nawrocki
Add IRQ and register base address definitions for MIPI CSI slave devices. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Add resource definitions for MIPI CSISSylwester Nawrocki
Naming changed for consistency with s5pv310 where there are two instances of the device. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Add DM9000 support on SMDKV210Thomas Abraham
This patch adds DM9000 Ethernet Controller device support for SMDKV210. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Add SROM controller clockThomas Abraham
This patch adds the SROM controller clock to the list of clocks to be enabled at boot time. It is required to be enabled at boot time since the modules connected over the SROM interface such as the Ethernet controller need an operational SROM. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move SROM controller IO mapping to plat-s5p for S5P SoCsThomas Abraham
This patch modifies the following. 1. Moves the SROM controller mapping from S5PV210 specific code to S5P common code. The SROM controller mapping can be used for all S5P SoCs. 2. Define the SROM controller physical address for S5P64X0, S5P6442, S5PC100, S5PV210 and S5PV310. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Add SROM bank 4 and 5 register offsetsThomas Abraham
Some of the S5P platforms like S5PC100 and S5PV210 include SROM banks 4 and 5 in addition to SROM banks 0 to 3. This patch adds register offsets for SROM bank 4 and 5. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Add SROM control register shift macros for other banks.Thomas Abraham
This patch adds shift macros for the SROM Bus width and control register to represent the shift count for the 5th and 6th SROM banks. Some of the S5P SOCs have them. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move the SROM register definitions to plat-s5pKukjin Kim
The SROM register difinitions of S5PV310/S5PC210 (mach/regs-srom.h) can be used to other S5P SoCs such as S5PV210/S5PC110. So moved into plat/regs-srom.h of plat-s5p directory. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: SAMSUNG: Add support for Power Domain controlChanghwan Youn
This patch implements Power Domain control based on Runtime PM framework. Each Power Domain is represented by a Power Domain device and the devices belong to these Power Domains should be set as a child device of the Power Domain devices. The corresponding drivers of the devices should implement Runtime PM to control the Power Domains. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: SAMSUNG: Convert irq-vic-timer to irq_ functionsMark Brown
Conver the VIC timer interrupts to use the irq_ versions of the IRQ operatiosn introduced in 2.6.37, storing the mask for the timer interrupt in the chip_data of the irq_data in order to save having to do a substraction and a shift on every operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: SAMSUNG: Convert irq-uart to use new irq_ functionsMark Brown
Convert to the new irq_ versions of the IRQ operations. As well as the textual substituion of irq_data for the raw IRQ number we also convert the register base lookup to in s3c_irq_uart_base() to pick the irq_data up directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S3C64XX: Use chip_data to store the shift for EINTsMark Brown
This makes all the functions that use the shift slightly smaller, one instruction in most cases but more for ack() and maskack(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methodsMark Brown
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Conver S3C64xx irq-eint to use this with a simple textual substitution. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methodsMark Brown
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Begin converting Samsung platforms over to these methods by converting s3c_irqext_wake() with a simple textual substitution. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Enable I2S device on SMDKC210Jassi Brar
Enable I2S_0 device on the SMDKC210. Also, add the dependency I2C_1 device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Enable I2S device on SMDKV310Jassi Brar
Enable I2S_0 device on the SMDKV310. Also, add the dependency I2C_1 device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Add AC97 support for SMDKJassi Brar
Enable AC97 audio device on SMDKV310 and SMDKC210. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Define I2S clocksJassi Brar
Define missing controller clocks for the I2S-0, 1 and 2 blocks. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: Added description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Add AC97 clockJassi Brar
Define clock for the AC97 controller. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Add PDMA clocksJassi Brar
Define PDMA clocks for the controller 0 and 1. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Enable I2C1 deviceJassi Brar
Enable the I2C1 device on SMDKV310 and SMDKC210. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Enable I2S device to work on SMDKV210Jassi Brar
Add missing virtual ASoC DMA device and WM8580 as I2C slave, so that the I2S can work on SMDKV210. [kgene.kim@samsung.com: removed virtual ASoC DMA device to avoid build error and it will be added next time] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Enable I2S device to work on SMDKC110Jassi Brar
Add missing virtual ASoC DMA device and WM8580 as I2C slave, so that the I2S can work on SMDKC110. [kgene.kim@samsung.com: removed virtual ASoC DMA device to avoid build error and it will be added next time] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P6450: Enable I2S device to work on SMDK6450Jassi Brar
Add missing virtual ASoC DMA device and WM8580 as I2C slave, so that the I2S can work on SMDK6450. [kgene.kim@samsung.com: removed virtual ASoC DMA device to avoid build error and it will be added next time] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P6440: Enable I2S device to work on SMDK6440Jassi Brar
Add missing virtual ASoC DMA device and WM8580 as I2C slave, so that the I2S can work on SMDK6440. [kgene.kim@samsung.com: removed virtual ASoC DMA device to avoid build error and it will be added next time] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P64X0: Segregate audio devicesRajeshwari Shinde
Segregate I2S devices for S5P6440 and S5P6450. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P6450: Define base addresses for I2SJassi Brar
Define the base address of I2S-1 and 2 for S5P6450. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: Added description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P6450: Define clocks for I2SJassi Brar
Define missing controller clocks for the I2S-0,1 blocks. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P6442: Enable I2C0 device on SMDK6442Jassi Brar
This patch enables I2C0 device for WM8580 on SMDK6442. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title and description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P6442: Implement i2c-gpio configJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: Fix re-probing with PM_POST_RESTORE notification mmc: atmel-mci: fix multiblock SDIO transfers mmc: at91_mci: fix multiblock SDIO transfers
2010-12-28ARM: fix IXP4xx build failureImre Kaloz
arm: export dma_set_coherent_mask While a regression was fixed with commit 710224fa2750cf (arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"), a new one was introduced as dma_set_coherent_mask wasn't exported for modules. This patch takes care for this issue. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22Merge branch 'next-samsung-asoc' into next-samsung-asoc2Kukjin Kim
2010-12-21mmc: at91_mci: fix multiblock SDIO transfersYauhen Kharuzhy
The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte transfers, but at91_mci driver doesn't use them and handles all SDIO transfers as ordinary MMC block transfers. This causes problems for multiple-block SDIO transfers (in particular for 256-bytes blocks). Fix this situation by checking the opcode for SDIO CMD53 and setting the transfer type in the AT91_MCI_CMDR register properly. This patch was tested with libertas SDIO driver: problem with TX timeouts on big packets was eliminated. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Cc: <stable@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-20Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: INTC interrupt priority level demux fix ARM: mach-shmobile: fix compile warning in mm/init.c
2010-12-20Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: update MAX8998 platform data to get rid of WARN() ARM S3C24XX: Fix compilation of PM code for S3C2416 ARM: S3C24XX: Fix CONFIG_S3C_DEV_NAND Kconfig entry
2010-12-17at91: Refactor Stamp9G20 and PControl G20 board fileChristian Glindkamp
As PControl G20 is a carrier board for the Stamp9G20 SoM, some code can be shared. Therefore board-stamp9g20.c is refactored to allow reusing the SoM initialization and board-pcontrol-g20.c is modified to use it. Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-12-17at91: Fix uhpck clock rate in upll caseRyan Mallon
The uhpck clock should be divided from the utmi clock, not its parent (main). This change is mostly cosmetic as the uhpck rate value is not used anywhere except for the debugfs clock output. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-12-17ARM: mach-shmobile: INTC interrupt priority level demux fixMagnus Damm
Fix interrupt priority level handling on SH-Mobile ARM. SH-Mobile ARM platforms using multiple interrupt priority levels need this patch to fix a potential dead lock that may occur if multiple interrupts with different levels are pending simultaneously. The default INTC configuration is to use the same priority level for all interrupts, so this issue does not trigger by default. It is however common for board code to override the interrupt priority for certain interrupt sources depending on the application. Without this fix such boards may lock up. In detail, this patch updates the INTC code in entry-macro.S to make sure that the INTLVLA register gets set as expected. To trigger this bug modify the board specific code to adjust the interrupt priority level for the ethernet chip. After changing the priority level simply use flood ping to drown the board with interrupts. This patch applies to INTCA-based processors such as sh7372, sh7377 and sh7372. GIC-based processors are not affected. Suitable for v2.6.37-rc and stable from v2.6.34 to v2.6.36. Cc: stable@kernel.org Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-17ARM: mach-shmobile: fix compile warning in mm/init.cMagnus Damm
Turn down the warning noise from the compiler, basically a SH-Mobile specific version of the patch located in the RMK patch tracker: 6484/1: "fix compile warning in mm/init.c", Without this patch the following warning triggers: CC arch/arm/kernel/sys_arm.o arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' CC arch/arm/kernel/traps.o Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-17ARM: S5PV210: update MAX8998 platform data to get rid of WARN()Marek Szyprowski
This patch adds new entries required by the new version of MAX8998 driver. Without them, the driver fails to init. See commit 50f19a4596 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-17ARM S3C24XX: Fix compilation of PM code for S3C2416Yauhen Kharuzhy
S3C2416 PM code uses low-level sleep routines from S3C2412 code, but these routines are compiled only for S3C2412 SoC. Split S3C2412_PM to two parts: S3C2412_PM, S3C2412_PM_SLEEP and select last in S3C2416's Kconfig. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-17ARM: S3C24XX: Fix CONFIG_S3C_DEV_NAND Kconfig entryKukjin Kim
Should be CONFIG_S3C_DEV_NAND instead of CONFIG_S3C_DEVICE_NAND. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-14Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks OMAP2+: PM/serial: fix console semaphore acquire during suspend OMAP1: SRAM: fix size for OMAP1611 SoCs arm: omap2: io: fix clk_get() error check arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check omap: nand: remove hardware ECC as default omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD omap: PM debug: fix wake-on-timer debugfs dependency
2010-12-14ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fixValentine Barshak
Cache ownership must be acquired by reading/writing data from the cache line to make cache operation have the desired effect on the SMP MPCore CPU. However, the ownership is never acquired in the v6_dma_inv_range function when cleaning the first line and flushing the last one, in case the address is not aligned to D_CACHE_LINE_SIZE boundary. Fix this by reading/writing data if needed, before performing cache operations. While at it, fix v6_dma_flush_range to prevent RWFO outside the buffer. Cc: stable@kernel.org Signed-off-by: Valentine Barshak <vbarshak@mvista.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNELDave Martin
Because the nwfpe support is unlikely to be used on new platforms and requires CONFIG_OABI_COMPAT, which is not generally used with ARMv7+, we shouldn't expect to build nwfpe support into a Thumb-2 kernel. At present, nwfpe contains assembly code which isn't Thumb-2 compatible, and for now it doesn't appear useful to port this code. All ARMv7-A/R platforms necessarily have VFPv3 hardware floating- point natively, making emulation unnecessary. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>