summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2013-06-17ARM: dts: imx27-phytec-phycore: Add reset GPIO for FECAlexander Shiyan
FEC (KSZ8001L) reset pin is connected to GPIOC30. Add this definition to dts. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: add initial VF610 Tower board dts supportJingchang Lu
Add initial Freescale Vybrid VF610 Tower board support with uart and fec enabled. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: add SoC level device tree source for VF610Jingchang Lu
Add SoC level device tree source for Freescale Vybrid VF610. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx53: add fec pinctrlJonas Andersson
Add a group to the fec pinctrl, for use with MII interface. Signed-off-by: Jonas Andersson <jonas@microbit.se> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx53: add ecspi2 pinctrlJonas Andersson
Add ecspi2 pinctrl. Signed-off-by: Jonas Andersson <jonas@microbit.se> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx53: add cspi pinctrlJonas Andersson
Add a group to the cspi pinctrl. Signed-off-by: Jonas Andersson <jonas@microbit.se> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: mx53qsb: Add support for parallel displayRogerio Pimentel
Add support for CLAA WVGA display for i.MX53 QSB. Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: apf51: add nfc supportGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6qdl: remove redundant ocotp nodeShawn Guo
There is a redundant ocotp node. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6qdl: remove redundant usbmisc labelShawn Guo
There is a redundant label on usbmisc node. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6sl: add initial imx6sl-evk supportShawn Guo
Add initial imx6sl-evk board support with uart, usdhc and fec enabled. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: add device tree source for imx6sl SoCShawn Guo
Add SoC level device tree source for imx6sl. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: i.MX6: configure L2 cache data and tag latencyDirk Behme
Configure the data and tag latency for the L2 cache. This improves the system performance. This configuration is taken from Freescale's kernel patch "ENGR00153601 [MX6]Adjust L2 cache parameter" [1] which does writel(0x132, IO_ADDRESS(L2_BASE_ADDR + L2X0_TAG_LATENCY_CTRL)); writel(0x132, IO_ADDRESS(L2_BASE_ADDR + L2X0_DATA_LATENCY_CTRL)); In this patch we are doing the same via the device tree. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [1] http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/arch/arm/mach-mx6/mm.c?h=imx_3.0.35_12.09.01&id=814656410b40c67a10b25300e51b0477b2bb96d1
2013-06-17ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boardsHuang Shijie
Since the SPI/NOR has pin conflict with the WEIM NOR, we disable the spi/nor by default. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6q: add a gpio for hogHuang Shijie
The SPI/NOR needs this gpio for CS. So add this gpio in the hog pinctrl. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add a gpio for hogHuang Shijie
The SPI/NOR needs this gpio for CS. So add this gpio in the hog pinctrl. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add a pinctrl for eCSPI1Huang Shijie
Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: enable the gpmi-nand for imx6q{dl}-sabreauto boardsHuang Shijie
enable the gpmi-nand for imx6q-sabreauto and imx6qdl-sabreauto boards. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add pinctrl for gpmi-nandHuang Shijie
add the pinctrl item for gpmi-nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6q: remove the unused pins for gpmi-nandHuang Shijie
The gpmi does not use the MX6Q_PAD_NANDF_CS2__NAND_CE2_B and MX6Q_PAD_NANDF_CS3__NAND_CE3_B. Just remove them. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: Add SPI support for i.MX27 Phytec PCM038 moduleAlexander Shiyan
Added SPI node and PMIC MC13783 (spi0.0) to imx27-phytec-phycore DT file. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: Add aliases for i.MX27 SPI controllerAlexander Shiyan
Add aliases to determine the proper SPI bus number. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: add Ka-Ro tx53 devicetreeSteffen Trumtrar
This adds support for the Ka-Ro TX53 System-On-Module. As a baseboard is needed to operate it, only a *.dtsi and no Makefile entry. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add uart2 pinctrlSteffen Trumtrar
Add a group to the uart2 pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add uart1 pinctrlSteffen Trumtrar
Add a group to the uart1 pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add pwm2 pinctrlSteffen Trumtrar
Add pinctrl for pwm2. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add ecspi pinctrlSteffen Trumtrar
Add a group to the ecspi pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add csi pinctrlSteffen Trumtrar
Add a group to the csi pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add audmux pinctrlSteffen Trumtrar
Add a group to the audmux pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add support for DENX M53EVKMarek Vasut
This patch adds support for the DENX M53EVK board. The board currently supports NAND, Ethernet, UART, CAN, I2C. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: move imx53-qsb audio codec clk lookup into DTShawn Guo
With device tree clk lookup support in place, we can move audio codec clk lookup for ssi_ext1 into device tree now, so that imx53_qsb_init() can be saved. Since ssi_ext2 lookup is used nowhere, it gets removed together with ssi_ext1 lookup from clk driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add PWM1 pinctrl dataMarek Vasut
This patch adds pinctrl data for PWM1 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add LCD IPU pinctrl dataMarek Vasut
This patch adds pinmux for IPU LCD 1 and IPU LVDS. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add NAND pinctrl dataMarek Vasut
This patch adds pinctrl data for NAND on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add I2C2 pinctrl dataMarek Vasut
This patch adds pinctrl data for different mux of I2C2 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add I2C1 pinctrl dataMarek Vasut
This patch adds pinctrl data for different mux of I2C1 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add CAN1 pinctrl dataMarek Vasut
This patch adds pinctrl data for different mux of CAN1 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add AUDMUX4 pinctrl dataMarek Vasut
This patch adds pinctrl data for the AUDMUX4 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: dts: add i2c aliasesPhilipp Zabel
This allows to order the i2c character devices correctly, so that /dev/i2c-0 corresponds to i2c1, /dev/i2c-1 corresponds to i2c2, and so on. Currently they are ordered by register address. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx27: Add PWM0 to device treeGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: imx53-qsb.dts: enable usbotg and usbh1Michael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: use usb-nop-xceiv usbphy entries for imx5xMichael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: add imx5x usb clock DT lookupsMichael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: add imx5x usbmisc entriesMichael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx_v6_v7_defconfig: Enable Vybrid VF610Fabio Estevam
Let VF610 SoC support be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by defaultNicolin Chen
Enable imx-wm8962 and PM_RUNTIME, essential for WM8962 CODEC driver. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresdNicolin Chen
WM8962 needs 24MHz clock for its MCLK, so choose PLL4 as the parent of clko1. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx_v6_v7_defconfig: Enable PWM and backlight optionsFabio Estevam
These options are useful for controlling backlight contrast via PWM. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: Remove mxc specific ulpi access opsMarkus Pargmann
There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. mxc access ops implement the same access operations within mach-imx. This patch removes the mxc ulpi file and uses phy-ulpi instead for imx_otg_ulpi_create. phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add initial support for VF610Jingchang Lu
Add initial support for Freescale Vybrid VF610 SoC. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 03:19:53 +0000