summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-01-11arm: add support for LZO-compressed kernelsAlbin Tonnerre
- changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11mm: make totalhigh_pages unsigned longAndreas Fenkart
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-08Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chains
2010-01-07ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chainsBen Dooks
There is a possibility of a loop happening in the PLL output clock chain on the S3C64XX series. clk_mpll's parent was set to be clk_mout_mpll, but this is fed from clk_fout_epll (which is also clk_mpll). clk_mpll is meant to be the output from the MPLL, and clk_mout_mpll is a seperate clock derived from the mux of clk_mpll and clk_fin_mpll and thus should be considered a seperate clock. Anything using clk_mpll directly really should not be relying on this being the clock that is eventually routed to a peripheral, so remove the loop and ensure that the clocks accurately represent the clock chain in the device. The clk_mpll is not being used outside of the s3c6400-clock.c code, so this change should not break anything else. Do the same for the EPLL. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-06Merge branch 'davinci-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: DaVinci: DM365: Add the device_enable for the DaVinci Keyscan davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci davinci: da8xx/omap-l1: mark RTC as a wakeup source davinci: cp_intc: provide set_wake function Davinci VPFE Capture: Take i2c adapter id through platform data
2010-01-06DaVinci: DM365: Add the device_enable for the DaVinci KeyscanMiguel Aguilar
Adds the device_enable function to the DaVinci Keyscan platform data to setup the PINMUX configuration. It also removes #ifdef from the DM365 EVM board in order to load it properly as a module. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinciSekhar Nori
All DaVinci platforms include a DSP or co-processor for audio/video acceleration. While creating memory for the DSP/co-processor, system integrator can end up creating a hole in the memory map of the sort: <kernel memory> <hole (memory for DSP)> <kernel memory> This sort of configuration needs ARCH_HAS_HOLES_MEMORYMODEL enabled. See further details see this discussion on ARM linux mailing list: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html The patch is boot tested on OMAP-L138, DM6446 and DM355 EVMs Signed-off-by: Sekhar Nori <nsekhar@ti.com> CC: Sriramakrishnan <srk@ti.com> CC: Khasim Syed Mohammed <khasim@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06davinci: da8xx/omap-l1: mark RTC as a wakeup sourceSekhar Nori
On da850, RTC alarm is a wakeup source from deep sleep. Mark it as a wakeup source after the rtc platform device is registered. Without this patch, the rtc-omap driver suspends the RTC during the suspend sequence and hence it cannot wakeup the SoC. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06davinci: cp_intc: provide set_wake functionSekhar Nori
There is nothing special to be done for interrupts which can wakeup the device from sleep on CP-INTC, but not having a set_wake implemented prevents use of common drivers which expect this function to be implemented for all wakeup interrupt sources. This patch fixes the issue encountered when using the omap-rtc driver on DA850. On DA850 the RTC alarm interrupt is used to wake up the SoC from deep sleep mode. Without this patch, the disable_irq_wake throws an unbalanced wake disable warning while resuming because the previous enable call fails for lack of set_wake implementation. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06Davinci VPFE Capture: Take i2c adapter id through platform dataVaibhav Hiremath
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. So modified respective davinci board files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) ARM: 5865/1: nuc900 ethernet driver needs mii ARM: 5864/1: Implement arch_reset() in NUC900 ARM: 5863/1: fix bugs of clock source of NUC900 ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range imx/mx3: depend on USB_ULPI for otg_ulpi_create ARM: MX3: make CPU revision number detection work on all boards mx25: pdk: add platform code for FEC support mx25: add support for FEC on i.MX25 mx25: s/NO_PAD_CTL/NO_PAD_CTRL/ mx31moboard: fix usbh device names mx3: add support for the mt9v022 camera sensor to pcm037 platform mx27: mxt_td60: Remove not used UART pins [ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMC [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot [ARM] pxa/ttc_dkb: remove duplicate macro definition [ARM] pxa/zeus: provide power-source information when APM is enabled [ARM] pxa/zeus: relax memory timings on Zeus ethernet ports [ARM] pxa/zeus: make internal zeus_get_pcb_info static [ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310 [ARM] pxa/littleton: add UART3 GPIO config ...
2010-01-05ARM: 5864/1: Implement arch_reset() in NUC900Li Jie
Implement arch_reset(), reboot from shell become possible. Signed-off-by: lijie <eltshanli@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-05ARM: 5863/1: fix bugs of clock source of NUC900Li Jie
This patch fix following bugs: 1. typo error, CLOCK_EVT_MODE_PERIODIC -> CLOCK_EVT_FEAT_PERIODIC 2. TCSR register of timer1 missed PRESCALE 3. timer1 should be enabled before register it to clock source. Signed-off-by: lijie <eltshanli@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-05ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_rangeBahadir Balban
Signed-off-by: Bahadir Balban <bbalban@b-labs.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-04Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-01-04imx/mx3: depend on USB_ULPI for otg_ulpi_createUwe Kleine-König
otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on CONFIG_USB_ULPI. So protect its usage by the same symbol. Moreover mxc_ulpi_access_ops needs CONFIG_MXC_ULPI. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04ARM: MX3: make CPU revision number detection work on all boardsWolfgang Denk
Commit 52939c03 (ARM: MX3: fix CPU revision number detection) started using the CPU's SREV register for revision number detection. This makes it mandatory to have a valid SPBA0 mapping. Add this to the global map_io code instead of adding multiple copies for each board. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested on Qong (EVB-Lite) Tested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx25: pdk: add platform code for FEC supportBaruch Siach
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx25: add support for FEC on i.MX25Baruch Siach
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx25: s/NO_PAD_CTL/NO_PAD_CTRL/Baruch Siach
NO_PAD_CTL is not defined anywhere. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx31moboard: fix usbh device namesValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx3: add support for the mt9v022 camera sensor to pcm037 platformGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx27: mxt_td60: Remove not used UART pinsAlan Carvalho de Assis
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04ARM: Merge next-simtecBen Dooks
Merge branch 'next-simtec' into for-linus/samsung
2009-12-29[ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMCEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slotHaojian Zhuang
PXA mmc host driver supports card detect, read only and power gpio pin setting already. Zylonite platform driver needn't implement this any more. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/ttc_dkb: remove duplicate macro definitionUwe Kleine-König
ARRAY_AND_SIZE is already defined arch/arm/mach-mmp/common.h which is already included. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Bin Yang <bin.yang@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zeus: provide power-source information when APM is enabledMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zeus: relax memory timings on Zeus ethernet portsMarc Zyngier
DM9000s on Zeus sometime fail under heavy load. Relaxing the timings a bit seems to be of a great help. Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zeus: make internal zeus_get_pcb_info staticMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310Marek Vasut
This has to be selected, otherwise some peripherals don't get initialized. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/littleton: add UART3 GPIO configMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa: use resource_size() in pwm.cH Hartley Sweeten
Use resource_size for {request/release}_mem_region and ioremap. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-24ARM: dma-isa: request cascade channel after registering itRussell King
We can't request the cascade channel before it's been registered, so move it afterwards. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-24ARM: footbridge: trim down old ISA rtc setupRussell King
This fixes a "start_kernel(): bug: interrupts were enabled early". rtc_cmos now takes care of initializing the ISA RTC and reading the current time and date from it; there's no need to repeat that here, thereby causing interrupts to be enabled too early. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-24ARM: fix PAGE_KERNELRussell King
PAGE_KERNEL should not be executable; any area marked executable can be prefetched into the instruction cache. We don't want vmalloc areas to be read in this way. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-23ARM: S3C: Fix NAND device registration by s3c_nand_set_platdata().Ben Dooks
Fix two bugs in s3c_nand_set_platdata() where thet device's platform data was not set, and the wrong error check was being performed on the return of s3c_nand_copy_set(). Fixes the following OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000004 PC is at s3c24xx_nand_probe+0x234/0x594 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23ARM: Fix wrong shared bit for CPU write buffer bug testRussell King
It is unpredictable to have the same memory mapped using different shared bit settings for ARMv6 and ARMv7 CPUs. Fix this for the CPU write buffer bug test. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-23ARM: S3C24XX: touchscreen device definitionArnaud Patard
Add definition for the touchscreen driver platform data and initial support for the H1940 machine. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devicesBen Dooks
Add the NAND_SCAN_SILENT_NODEV to the optional NAND devices that may not be fitted to the board Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23ARM: mach-osiris: add NAND_SCAN_SILENT_NODEV to optional devicesBen Dooks
Add the NAND_SCAN_SILENT_NODEV to the optional NAND devices that may not be fitted to the board Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-22ARM: 5857/1: ARM: dmabounce: fix buildMike Rapoport
Commit f74f7e57ae9fa12b2951ae62ce3557799b318399 (ARM: use flush_kernel_dcache_area() for dmabounce) has broken dmabounce build: CC arch/arm/common/dmabounce.o arch/arm/common/dmabounce.c: In function 'unmap_single': arch/arm/common/dmabounce.c:315: error: implicit declaration of function '__cpuc_flush_kernel_dcache_area' make[2]: *** [arch/arm/common/dmabounce.o] Error 1 Fix it. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-22ARM: 5856/1: Fix bug of uart0 platfrom data for nuc900wanzongshun
Fix bug of uart0 platfrom data for nuc900 Signed-off-by: lijie <eltshanli@gmail.com> Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-22ARM: 5855/1: putc support for nuc900wanzongshun
putc support for nuc900 Signed-off-by: lijie <eltshanli@gmail.com> Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-22ARM: 5854/1: fix compiling error for NUC900wanzongshun
fix compiling error for NUC900 Signed-off-by: lijie <eltshanli@gmail.com> Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-22ARM: 5849/1: ARMv7: fix Oprofile events countJean PIHET
On Oprofile ARMv7 the PMNC_D bit was set to lower the PMU IRQs and so to decrease the risk of errata #628216 from appearing. The effect of setting the PMNC_D bit is that the CCNT counter is divided by 64, making the program counter events count inaccurate. The new OMAP3 r4 cores should have that errata fixed. The PMNC_D bit should not be set, this patch fixes it. Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18ARM: Kill CONFIG_CPU_32Russell King
26-bit ARM support was removed a long time ago, and this symbol has been defined to be 'y' ever since. As it's never disabled anymore, we can kill it without any side effects. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()Russell King
This avoids races in the VFP code where the dead thread may have state on another CPU. By moving this code to exit_thread(), we will be running as the thread, and therefore be running on the current CPU. This means that we can ensure that the only local state is accessed in the thread notifiers. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18ARM: 5853/1: ARM: Fix build break on ARM v6 and v7Anand Gadiyar
Commit 2c9b9c849 added an argument to __cpuc_flush_dcache_page and renamed it. Update a caller of the old function to fix this build error: CC arch/arm/mm/copypage-v6.o arch/arm/mm/copypage-v6.c: In function 'v6_copy_user_highpage_nonaliasing': arch/arm/mm/copypage-v6.c:51: error: implicit declaration of function '__cpuc_flush_dcache_page' make[1]: *** [arch/arm/mm/copypage-v6.o] Error 1 make: *** [arch/arm/mm] Error 2 Reported-by: Jinsung Yang <jsgood.yang@samsung.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-17Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: serial - fix bug introduced in mfd: twl: fix twl4030 rename for remaining driver, board files USB ehci: replace mach header with plat omap3: Allow EHCI to be built on OMAP3
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 11:09:21 +0000