summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2013-04-29ARM: msm: USB_MSM_OTG needs USB_PHYArnd Bergmann
The Kconfig entry for USB_EHCI_MSM unconditionally selects USB_MSM_OTG, which is now only visible when USB_PHY is also enabled. A dependency for this has been added in the USB tree, this adds the now missing bit in the defconfig. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-17Merge tag 'davinci-for-v3.10/board-2-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards From Sekhar Nori: v3.10 board updates for DaVinci This set of patches enables remoteproc support on DA850 EVM and fixes some sparse warnings for the same board. * tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: davinci: remove test for undefined Kconfig macro ARM: davinci: mmc: derive version information from device name ARM: davinci: da850: add ECAP & EHRPWM clock nodes ARM: davinci: clk framework support for enable/disable functionality
2013-04-17Merge tag 'boards-3.10' of git://git.infradead.org/users/jcooper/linux into ↵Olof Johansson
next/boards From Jason Cooper: mvebu boards for v3.10 - kirkwood - Netgear ReadyNAS Duo v2 - add guruplug dt to defconfig - Lacie Cloudbox * tag 'boards-3.10' of git://git.infradead.org/users/jcooper/linux: ARM: Kirkwood: update Network Space Mini v2 description ARM: Kirkwood: DT board setup for CloudBox ARM: Kirkwood: sort board entries by ASCII-code order ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-17ARM: davinci: da850 evm: fix const qualifier placementSekhar Nori
const qualifier was misplaced in couple of definitions. This fixes the sparse error: CHECK arch/arm/mach-davinci/board-mityomapl138.c arch/arm/mach-davinci/board-da850-evm.c:404:19: error: Just how const do you want this type to be? arch/arm/mach-davinci/board-da850-evm.c:568:19: error: Just how const do you want this type to be? Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17ARM: davinci: da850 board: add remoteproc supportRobert Tivy
Add .reserve function for reserving CMA memory block to MACHINE_START. Add call to remoteproc platform device registration function during init. Signed-off-by: Robert Tivy <rtivy@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17ARM: davinci: ensure global variables are declaredSekhar Nori
Fix the following sparse warnings by declaring relevant global variables. CHECK arch/arm/mach-davinci/usb.c arch/arm/mach-davinci/usb.c:134:12: warning: symbol 'da8xx_register_usb20' was not declared. Should it be static? arch/arm/mach-davinci/usb.c:169:12: warning: symbol 'da8xx_register_usb11' was not declared. Should it be static? CHECK arch/arm/mach-davinci/pm.c arch/arm/mach-davinci/pm.c:155:12: warning: symbol 'davinci_pm_init' was not declared. Should it be static? Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17ARM: davinci: sram.c: fix incorrect type in assignmentSekhar Nori
Fix missing __iomem attribute. This fixes the sparse warning: CHECK arch/arm/mach-davinci/sram.c arch/arm/mach-davinci/sram.c:75:8: warning: incorrect type in assignment (different address spaces) arch/arm/mach-davinci/sram.c:75:8: expected void *addr arch/arm/mach-davinci/sram.c:75:8: got void [noderef] <asn:2>* arch/arm/mach-davinci/sram.c:81:12: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-davinci/sram.c:81:12: expected void volatile [noderef] <asn:2>*addr arch/arm/mach-davinci/sram.c:81:12: got void *addr Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17ARM: davinci: da8xx dt: make file local symbols staticSekhar Nori
Make some file-local functions static. This fixes the sparse warnings: CHECK arch/arm/mach-davinci/da8xx-dt.c arch/arm/mach-davinci/da8xx-dt.c:23:13: warning: symbol 'da8xx_uart_clk_enable' was not declared. Should it be static? arch/arm/mach-davinci/da8xx-dt.c:40:23: warning: symbol 'da850_auxdata_lookup' was not declared. Should it be static? Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17ARM: davinci: da8xx: add remoteproc supportRobert Tivy
Add remoteproc platform device for controlling the DSP on da8xx. The patch uses CMA-based reservation of physical memory block for DSP use. A new kernel command-line parameter has been added to allow boot-time specification of the physical memory block. Signed-off-by: Robert Tivy <rtivy@ti.com> [nsekhar@ti.com: edit commit message for readability and style improvements] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-14Merge tag 'msm-defconfig-3.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/boards From David Brown: Defconfig updates for MSM The msm_defconfig is quite out of date. This allows the targets we are actively working on to be more easily build and run tested. * tag 'msm-defconfig-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: enable SSBI driver in defconfig ARM: msm: Concentrate defconfig on DT supported devices
2013-04-11Merge branch 'armsoc/pxa' of git://github.com/hzhuang1/linux into next/boardsOlof Johansson
A series dealing with gpio configuration cleanup from Haojian Zhuang. * 'armsoc/pxa' of git://github.com/hzhuang1/linux: ARM: pxa: move debug uart code ARM: pxa: select PXA935 on saar & tavorevb ARM: mmp: add more compatible names in gpio driver ARM: pxa: move PXA_GPIO_TO_IRQ macro ARM: pxa: remove cpu_is_xxx in gpio driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-11ARM: pxa: move debug uart codeHaojian Zhuang
Move debug uart code from mach-pxa/mach-mmp to debug directory. Since they are similar, merge them together. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Eric Mico <eric.y.miao@gmail.com>
2013-04-11ARM: pxa: select PXA935 on saar & tavorevbHaojian Zhuang
Since both PXA930 and PXA935 are used in Saar & TavorEVB platform, select PXA935 too. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2013-04-11ARM: mmp: add more compatible names in gpio driverHaojian Zhuang
Since more driver names are added into platform id, do the same thing on compatible names for DT mode. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: move PXA_GPIO_TO_IRQ macroHaojian Zhuang
Since PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() macro are depended on arch code, move them from gpio driver to platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: remove cpu_is_xxx in gpio driverHaojian Zhuang
Avoid to use cpu_is_xxx() in pxa gpio driver. Use platform_device_id to identify the difference. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10ARM: Kirkwood: update Network Space Mini v2 descriptionSimon Guinot
LaCie has released two products under the CloudBox name. The netspace_mini_v2 machine is embedded in the oldest product. The cloudbox machine is embedded in the newest one. In order to allow a CloudBox user to select the right machine support, this patch adds some informations to the netspace_mini_v2 Kconfig description. A comment is also added to the dts file. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-10ARM: Kirkwood: DT board setup for CloudBoxSimon Guinot
This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-10ARM: Kirkwood: sort board entries by ASCII-code orderSimon Guinot
This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09Merge tag 'omap-for-v3.10/board-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards From Tony Lindgren <tony@atomide.com>: Board related changes for v3.10 merge window. These are pretty much all non-critical fixes for platform device initialization that will be needed until we can drop the board-*.c files and move to DT based boot. * tag 'omap-for-v3.10/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration Includes an update to Linux 3.9-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'davinci-for-v3.10/board' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards From Sekhar Nori <nsekhar@ti.com>: v3.10 board updates for DaVinci This pull request enables CGROUPS in defconfig and also cleans up mach-davinci to use IS_ENABLED() macro. * tag 'davinci-for-v3.10/board' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: use is IS_ENABLED macro ARM: davinci: defconfig: enable CGROUPS Includes an update to v3.9-rc3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-08ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlightAndrew Chew
The pwm-backlight driver now takes a mandatory regulator that is gotten during driver probe. Initialize a dummy regulator to satisfy this requirement. Signed-off-by: Andrew Chew <achew@nvidia.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated fixed regulator id to avoid errors] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlightPeter Ujfalusi
Use pwm_leds driver for the keyboard light and pwm-backlight for the lcd backlight control (instead of implementing the PWM driver part in the board file). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensorRuslan Bilovol
This patch enables BMP085 pressure sensor that can be found on OMAP4 Blaze Tablet development platform Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08omap2+: Remove useless Makefile linePaul Bolle
Merge commit 952414505f55afe5cd6dc004765076aa22b3ed7e ("Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc") added references to CONFIG_MACH_PCM049 and board-omap4pcm049.o to this Makefile. But there's no Kconfig symbol MACH_PCM049 and there's no file board-omap4pcm049.c. This line can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08omap2+: Remove useless Makefile linePaul Bolle
Commit f41caddbe73f52a42f529d668ce47b4d693fd2c0 ("omap2+: Use Kconfig symbol in Makefile instead of obj-y") reorganized this Makefile. But, for some reason, it also added references to CONFIG_MACH_ENCORE and board-omap3encore.o. But there's no Kconfig symbol MACH_ENCORE and there's no file board-omap3encore.c. This line can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02dAaro Koskinen
Add missing regulator definitions for lis3lv02d accelerometer. Fixes the following probe issue: [ 57.737518] lis3lv02d_i2c 3-001d: Failed to get supply 'Vdd': -517 [ 57.747100] i2c 3-001d: Driver lis3lv02d_i2c requests probe deferral Reported-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08ARM: OMAP1: fix omap_udc registrationAaro Koskinen
omap_udc platform device is not registered properly anymore: CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow multiple gadgets to be built) already in v3.1. Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking that omap_udc is probed & working properly when built as a module. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-03Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another round of ARM fixes, which include: - Fixing a problem with LPAE mapping sections - Reporting of some hwcaps on Krait CPUs - Avoiding repetitive warnings in the breakpoint code - Fixing a build error noticed on Dove platforms with PJ4 CPUs - Fix masking of level 2 cache revision. - Fixing timer-based udelay() - A larger fix for an erratum causing people major grief with Cortex A15 CPUs" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7690/1: mm: fix CONFIG_LPAE typos ARM: 7689/1: add unwind annotations to ftrace asm ARM: 7685/1: delay: use private ticks_per_jiffy field for timer-based delay ops ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations) ARM: 7682/1: cache-l2x0: fix masking of RTL revision numbering and set_debug init ARM: iWMMXt: always enable iWMMXt support with PJ4 CPUs ARM: 7681/1: hw_breakpoint: use warn_once to avoid spam from reset_ctrl_regs() ARM: 7678/1: Work around faulty ISAR0 register in some Krait CPUs ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register ARM: 7679/1: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n ARM: 7677/1: LPAE: Fix mapping in alloc_init_section for unaligned addresses ARM: KVM: vgic: take distributor lock on sync_hwstate path ARM: KVM: vgic: force EOIed LRs to the empty state
2013-04-03ARM: 7690/1: mm: fix CONFIG_LPAE typosPaul Bolle
CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix up the two typos under arch/arm/. The fix to head.S is slightly scary, but this is just for setting up an early io-mapping for the serial port when running on a big-endian, LPAE system. Since these systems don't exist in the wild (at least, I have no access to one outside of kvmtool, which doesn't provide a serial port suitable for earlyprintk), then we can revisit the code later if it causes any problems. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03ARM: 7689/1: add unwind annotations to ftrace asmRabin Vincent
Add unwind annotations to the ftrace assembly code so that the function tracer's stacktracing options (func_stack_trace, etc.) work when CONFIG_ARM_UNWIND is enabled. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03ARM: 7685/1: delay: use private ticks_per_jiffy field for timer-based delay opsWill Deacon
Commit 70264367a243 ("ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock") fixed a problem with our timer-based delay loop, where loops_per_jiffy is scaled by cpufreq yet used directly by the timer delay ops. This patch fixes the problem in a more elegant way by keeping a private ticks_per_jiffy field in the delay ops, independent of loops_per_jiffy and therefore not subject to scaling. The loop-based delay continues to use loops_per_jiffy directly, as it should. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB ↵Catalin Marinas
operations) On Cortex-A15 (r0p0..r3p2) the TLBI/DSB are not adequately shooting down all use of the old entries. This patch implements the erratum workaround which consists of: 1. Dummy TLBIMVAIS and DSB on the CPU doing the TLBI operation. 2. Send IPI to the CPUs that are running the same mm (and ASID) as the one being invalidated (or all the online CPUs for global pages). 3. CPU receiving the IPI executes a DMB and CLREX (part of the exception return code already). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03ARM: 7682/1: cache-l2x0: fix masking of RTL revision numbering and set_debug ↵Rob Herring
init Commit b8db6b8 (ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache ctrl) moved the masking of the part ID which caused the RTL version to be lost. Commit 6248d06 (ARM: 7545/1: cache-l2x0: make outer_cache_fns a field of l2x0_of_data) changed how .set_debug is initialized. Both commits break commit 74ddcdb (ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier) which uses the RTL version to conditionally set .set_debug function pointer. Commit b8db6b8 also caused the printed cache ID to be missing the version information. Fix this by reverting how the part number is masked so the RTL version info is maintained. The cache-id-part DT property does not set the RTL bits so masking them should have no effect. Also, re-arrange the order of the function pointer init so the .set_debug function can be overridden. Reported-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03ARM: iWMMXt: always enable iWMMXt support with PJ4 CPUsRussell King
Jason Cooper reports these build errors: arch/arm/kernel/built-in.o: In function `iwmmxt_do': /.../arch/arm/kernel/pj4-cp0.c:36: undefined reference to `iwmmxt_task_release' /.../arch/arm/kernel/pj4-cp0.c:40: undefined reference to `iwmmxt_task_switch' make: *** [vmlinux] Error 1 This is caused because the PJ4 code explicitly references the iWMMXt code, but doesn't require it to be built. Fix this by ensuring that iWMMXt is always enabled with PJ4. Reported-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03ARM: davinci: remove test for undefined Kconfig macroPaul Bolle
The DaVinci debugging macro contains a check for CONFIG_DEBUG_DAVINCI_DA8XX_UART0. But there's no corresponding Kconfig symbol, so this test will always evaluate to false. That Kconfig symbol is not needed because, as __arch_decomp_setup() shows, there are no DaVinci DA8XX boards that use UART0 for debugging. We can remove two lines of unneeded code. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03ARM: davinci: mmc: derive version information from device nameManjunathappa, Prakash
Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-02Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC bug fixes from Arnd Bergmann: "After a quiet set of fixes for 3.9-rc4, a lot of people woke up and sent urgent fixes for 3.9. I pushed back on a number of them that got deferred to 3.10, but these are the ones that seemed important. Regression in 3.9: - Multiple regressions in OMAP2+ clock cleanup - SH-Mobile frame buffer bug fix that merged here because of maintainer MIA - ux500 prcmu changes broke DT booting - MMCI duplicated regulator setup on ux500 - New ux500 clock driver broke ethernet on snowball - Local interrupt driver for mvebu broke ethernet - MVEBU GPIO driver did not get set up right on Orion DT - incorrect interrupt number on Orion crypto for DT Long-standing bugs, including candidates for stable: - Kirkwood MMC needs to disable invalid card detect pins - MV SDIO pinmux was wrong on Mirabox - GoFlex Net board file needs to set NAND chip delay - MSM timer restart race - ep93xx early debug code broke in 3.7 - i.MX CPU hotplug race - Incorrect clock setup for OMAP1 USB - Workaround for bad clock setup by some old OMAP4 boot loaders - Static I/O mappings on cns3xxx since 3.2" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: cns3xxx: fix mapping of private memory region arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. arm: orion5x: correct IRQ used in dtsi for mv_cesa arm: orion5x: fix orion5x.dtsi gpio parameters ARM: Kirkwood: fix unused mvsdio gpio pins arm: mvebu: Use local interrupt only for the timer 0 ARM: kirkwood: Fix chip-delay for GoFlex Net ARM: ux500: Enable the clock controlling Ethernet on Snowball ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill ARM: msm: Stop counting before reprogramming clockevent ARM: ep93xx: Fix wait for UART FIFO to be empty ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb ARM: OMAP4: clock data: lock USB DPLL on boot ARM: OMAP1: fix USB host on 1710
2013-04-02Merge tag 'v3.9-rc1_cns3xxx_fixes' of ↵Arnd Bergmann
git://git.infradead.org/users/cbou/linux-cns3xxx into fixes From Anton Vorontsov <anton@enomsg.org>: This tag includes Mac Lin's work to revive CNS3xxx booting: "Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), [...] the pre-defined iotable mappings is not in the vmalloc region. [...] move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region." Plus there is a small cosmetic fix, also from Mac Lin. * tag 'v3.9-rc1_cns3xxx_fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx: ARM: cns3xxx: fix mapping of private memory region [arnd: dropped the cosmetic fix from the merge as it is not needed for 3.9] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-02ARM: davinci: use is IS_ENABLED macroLad, Prabhakar
This patches replaces #if defined() by IS_ENABLED macro, which provides better readability. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01ARM: davinci: da850: add ECAP & EHRPWM clock nodesPhilip Avinash
Add ECAP and EHRPWM module clock nodes. Also add a clock node for TBCLK for EHRWPM. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01ARM: davinci: clk framework support for enable/disable functionalityPhilip Avinash
DaVinci clock implementation does not support clock enable/disable functionality on non-PSC clock nodes. On DA850 SoC, EHRPWM module requires support for enable/disable of TBCLK controlled using a system module register. This patch adds a method for enabling/disabling non-PSC clocks into DaVinci clock implementation. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-30ARM: kirkwood: add MACH_GURUPLUG_DT to defconfigSebastian Hesselbarth
This patch just adds the missing MACH_GURUPLUG_DT to kirkwood_defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reported-by: Soeren Moch <smoch@web.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-30ARM: cns3xxx: fix mapping of private memory regionMac Lin
Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the Cavium CNS3xxx cannot boot anymore. This is caused by the pre-defined iotable mappings is not in the vmalloc region. This patch move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region. Signed-off-by: Mac Lin <mkl0301@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> Cc: stable@vger.kernel.org [v3.3+]
2013-03-29Merge tag 'mvebu_fixes_for_v3.9_round2' of ↵Arnd Bergmann
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper <jason@lakedaemon.net>: mvebu fixes for v3.9 (round 2) - mvebu - interrupt fix - DT pinctrl definition for sdio - kirkwood - chip-delay for GoFlex Net (fix reading nand) - set mvsdio unused pins to invalid value for legacy boards (0 is valid) - orion5x - fix typo in gpio parameters - use correct irq in dtsi * tag 'mvebu_fixes_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux: arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. arm: orion5x: correct IRQ used in dtsi for mv_cesa arm: orion5x: fix orion5x.dtsi gpio parameters ARM: Kirkwood: fix unused mvsdio gpio pins arm: mvebu: Use local interrupt only for the timer 0 ARM: kirkwood: Fix chip-delay for GoFlex Net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-28ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DTArnaud Ebalard
Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.Ryan Press
The previous configuration used the wrong "clk" pin. Without this change mv_sdio worked because the bootloader would set the pin up, but with a bootloader that does not set the pin, mv_sdio fails to detect any card. I have tested this change using a mwifiex_sdio wireless network adapter over the SDIO interface. Signed-off-by: Ryan Press <ryan@presslab.us> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28arm: orion5x: correct IRQ used in dtsi for mv_cesaAlexander Clouter
The crypto functionality in the orion5x dtsi uses the Ethernet IRQ and so things do not work and there is much grumbling at boot time. The IRQ for the crypto should be 28, and not 22, and that is what this patch corrects. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28arm: orion5x: fix orion5x.dtsi gpio parametersAlexander Clouter
orion5x.dtsi is missing the gpio alias as well as including a typo ('ngpio' instead of 'ngpios') that prevented the orion-gpio driver from loading. Also missing were the interrupt-controller properties. This patches resolves those glitches. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28ARM: Kirkwood: fix unused mvsdio gpio pinsSebastian Hesselbarth
mvsdio_platform_data allows to pass card detect and write protect gpio numbers to the driver. Some kirkwood boards don't use both pins as they are not connected, and don't set the corresponding value in platform_data. This will leave the unset values in platform_data initialized as 0, which is in fact a valid gpio pin. mvsdio will grab that pin and configure it as gpio, which in turn breaks nand controller as mpp0 also carries nand_io2. This patch fixes the above by initializing unused gpio functions in the platform_data with an invalid (-1) value. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reported-by: Soeren Moch <smoch@web.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-23 04:41:02 +0000