summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-05-16ARM: i.MX: change timer clock from ipg to perclkRichard Zhao
Contrary to the ipg clock the perclk rate is not changed or gated in low power mode, so we choose perclk for gpt. With the port to the common clock framework as a side effect the timer used the rate returned from the peripheral clock but the hardware was still programmed to use the ipg clock, so this patch only changes the hardware to really use the clock it already assumed. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-16ARM i.MX5: fix gpt peripheral clock pathSascha Hauer
- The gpt peripheral clk parent is per_root, not ipg - The register for selectin per_lp_apm and per_root is MXC_CCM_CBCMR, not MXC_CCM_CBCDR Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-14Merge branch 'imx/pinctrl' into imx/clockArnd Bergmann
Conflicts: drivers/mmc/host/sdhci-esdhc-imx.c drivers/net/ethernet/freescale/fec.c drivers/spi/spi-imx.c drivers/tty/serial/imx.c This resolves dependencies between the pinctrl and clock changes in imx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12ARM: mxs: enable pinctrl supportShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-09ARM i.MX: remove now unused clock filesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-09ARM: i.MX6: implement clocks using common clock frameworkShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-09ARM i.MX35: implement clocks using common clock frameworkSascha Hauer
This patch also adds the SPDIF baud clock mux and dividers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-09ARM i.MX5: implement clocks using common clock frameworkSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-08ARM: imx6q: switch to use pinctrl subsystemDong Aisheng
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: mxs: enable pinctrl dummy statesShawn Guo
The mxs pinctrl driver will only support DT probe. That said, the mxs device drivers can only get pinctrl state from pinctrl subsystem when the drivers get probed from device tree. Before converting the whole mxs platform support over to device tree, we need to enable pinctrl dummy states for those non-DT board files to ensure the pinctrl API adopted by mxs device drivers will work for both DT and non-DT probe. Instead of calling pinctrl_provide_dummies() directly in every board file, the patch introduces soc specific calls mx23_soc_init() and mx28_soc_init() for boards' .init_machine hook to invoke, so that any soc specific setup for non-DT boot only can be added there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: imx: enable pinctrl dummy statesDong Aisheng
Enable pinctrl dummy states for imx platforms without pinctrl support. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02ARM i.MX31: implement clocks using common clock frameworkSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-02ARM i.MX27: implement clocks using common clock frameworkSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-02ARM i.MX21: implement clocks using common clock frameworkSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-02ARM i.MX1: implement clocks using common clock frameworkSascha Hauer
This also changes the DMA clkdev lookup to use the imx-dma driver name and "ahb" as connection ID to request the hclk dma clock. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-02ARM i.MX25: implement clocks using common clock frameworkSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2012-05-02ARM: imx: add common clock support for clk busyShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-02ARM: imx: add common clock support for pfdShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02ARM i.MX: Add common clock support for 2bit gateSascha Hauer
This gate consists of two bits: 0b00: clk disabled 0b01: clk enabled in run mode and disabled in sleep mode 0b11: clk enabled Currently only disabled and enabled are supported. As it's unlikely that we find something like this in another SoC create a i.MX specific clk helper for this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-02ARM: imx: add common clock support for pllv3Shawn Guo
This PLL is found on i.MX6 SoCs Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02ARM i.MX: Add common clock support for pllv2Sascha Hauer
This PLL is found on i.MX51 and i.MX53 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-02ARM i.MX: Add common clock support for pllv1Sascha Hauer
The pllv1 is found on i.MX1, i.M25, i.MX27, i.MX31 and i.MX35. Currently only reading the rate is supported. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Nothing controversial, just another batch of fixes: - Samsung/exynos fixes for more merge window fallout: build errors and warnings mostly, but also some clock/device setup issues on exynos4/5 - PXA bug and warning fixes related to gpio and pinmux - IRQ domain conversion bugfixes for U300 and MSM - A regulator setup fix for U300" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PXA2xx: MFP: fix potential direction bug ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT arm/sa1100: fix sa1100-rtc memory resource ARM: pxa: fix gpio wakeup setting ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined ARM: EXYNOS: Fix resource on dev-dwmci.c ARM: S3C24XX: Fix build warning for S3C2410_PM ARM: mini2440_defconfig: Fix build error ARM: msm: Fix gic irqdomain support ARM: EXYNOS: Fix incorrect initialization of GIC ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers ARM: u300: bump all IRQ numbers by one ARM: ux300: Fix unimplementable regulation constraints
2012-04-27Merge branch 'v3.4-samsung-fixes-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined ARM: EXYNOS: Fix resource on dev-dwmci.c ARM: S3C24XX: Fix build warning for S3C2410_PM ARM: mini2440_defconfig: Fix build error ARM: EXYNOS: Fix incorrect initialization of GIC ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers
2012-04-27Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesOlof Johansson
* 'fixes' of git://github.com/hzhuang1/linux: ARM: PXA2xx: MFP: fix potential direction bug ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT arm/sa1100: fix sa1100-rtc memory resource ARM: pxa: fix gpio wakeup setting
2012-04-27ARM: PXA2xx: MFP: fix potential direction bugIgor Grinberg
Pins configured as input and have MFP_LPM_DRIVE_* flag set, can have a wrong output value for some period of time (spike) during the suspend sequence. This can happen because the direction of the pins (GPDR) is set by software and the output level is set by hardware (PGSR) at a later stage. Fix the above potential bug by setting the output levels first. Also save the actual levels of the pins before the suspend and restore them after the resume, but before the direction settings take place, so the same bug as described above will not happen in the resume sequence. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUTIgor Grinberg
Pins that have MFP_LPM_KEEP_OUTPUT set and are configured for output must retain the output state in low power mode. Currently, the pin direction configuration is overrided with values in gpdr_lpm[] array and do not obey the MFP_LPM_KEEP_OUTPUT setting. Fix the above bug and add some documentation to clarify the MFP_LPM_KEEP_OUTPUT setting purpose. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27arm/sa1100: fix sa1100-rtc memory resourceDmitry Artamonow
DEFINE_RES_MEM() takes the size of resource as a second argument, not the end address. Passing end address leads to following error in runtime during device registration: sa1100-rtc: failed to claim resource 0 Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27ARM: pxa: fix gpio wakeup settingRobert Jarzmik
In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-26Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge fixes from Andrew Morton: "13 fixes. The acerhdf patches aren't (really) fixes. But they've been stuck in my tree for up to two years, sent to Matthew multiple times and the developers are unhappy." * emailed from Andrew Morton <akpm@linux-foundation.org>: (13 patches) mm: fix NULL ptr dereference in move_pages mm: fix NULL ptr dereference in migrate_pages revert "proc: clear_refs: do not clear reserved pages" drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file hugetlbfs: lockdep annotate root inode properly acerhdf: lowered default temp fanon/fanoff values acerhdf: add support for new hardware acerhdf: add support for Aspire 1410 BIOS v1.3314 fs/buffer.c: remove BUG() in possible but rare condition mm: fix up the vmscan stat in vmstat epoll: clear the tfile_check_list on -ELOOP mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma
2012-04-25Merge branch 'u300-fixes-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'u300-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: u300: bump all IRQ numbers by one ARM: ux300: Fix unimplementable regulation constraints
2012-04-25arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo fileVasiliy Kulikov
Don't allow everybody to use a modem. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-25Merge branch 'msm-fix' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into fixes * 'msm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Fix gic irqdomain support
2012-04-25ARM i.MX: prepare for common clock frameworkSascha Hauer
- Add necessary #ifdefs for CONFIG_COMMON_CLOCK - Add a global spinlock to protect the CCM registers Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25ARM i.MX3: Make ccm base address a variableSascha Hauer
Instead of having a cpu_is_* in each ccm register access it is more efficient to make it a variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25ARM i.MX timer: request correct clockSascha Hauer
We used to pass the timer clock directly to mxc_timer_init. We should instead request the correct clock. This is an intermediate step: For now we request the clock in the timer code when NULL is passed as clock. Also, the gpt on some i.MX have an additional ipg clock which can be gated. Request and enable this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25ARM i.MX5: prepare gpc_dvfs_clkSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-24ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capabilityMarek Szyprowski
Commit 6e8201f57c935 "mmc: core: add the capability for broken voltage" introduced a new quirk to indicate that MMC core should ignore voltage change errors reported by the regulators core. This is required to get SDHCI working on UniversalC210, NURI and GONI boards again after commit ceb6143b2df81c ("mmc: sdhci: fix vmmc handling"). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: EXYNOS: Fix compilation error when CONFIG_OF is not definedTushar Behera
Fixed following compile time error. arch/arm/mach-exynos/common.c: In function 'exynos5_init_irq': arch/arm/mach-exynos/common.c:539:2: error: implicit declaration of function 'of_irq_init' arch/arm/mach-exynos/common.c:539:14: error: 'exynos4_dt_irq_match' undeclared (first use in this function) arch/arm/mach-exynos/common.c:539:14: note: each undeclared identifier is reported only once for each function it appears in Cc: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: EXYNOS: Fix resource on dev-dwmci.cKukjin Kim
Should be EXYNOS4_IRQ_DWMCI instead of IRQ_DWMCI, and use DEFINE_RES_{MEM,IRQ}. Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: S3C24XX: Fix build warning for S3C2410_PMKukjin Kim
warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: mini2440_defconfig: Fix build errorArnd Bergmann
This is needed to fix mini2440_defconfig after the platform files have been moved around. arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-23ARM: msm: Fix gic irqdomain supportDavid Brown
As of commit 75294957be1dee7d22dd7d90bd31334ba410e836 Author: Grant Likely <grant.likely@secretlab.ca> Date: Tue Feb 14 14:06:57 2012 -0700 irq_domain: Remove 'new' irq_domain in favour of the ppc one the ARM gic controller uses proper irq domains. Fix the MSM gic initialization and DT so that it works again. Signed-off-by: David Brown <davidb@codeaurora.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Here's my usual Sunday push, just for one revert which PeterZ hollered about after last weeks push. Other than that, all seems strangely quiet as far as fixes go in non-platform ARM land at the moment." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"
2012-04-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
2012-04-20ARM: EXYNOS: Fix incorrect initialization of GICThomas Abraham
Use the of_irq_init() call to setup the gic which also properly registers the gic device node pointer with gic irq domain, without which all interrupt specifier translations for gic fail. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-20ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllersThomas Abraham
With the addition of platform specific driver data in the sdhci driver for EXYNOS4 and EXYNOS5, the device name of sdhci controllers on EXYNOS4 and EXYNOS5 are changed accordingly. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> [kgene.kim@samsung.com: re-worked on top of v3.4-rc2] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-20ARM: u300: bump all IRQ numbers by oneLinus Walleij
Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the U300 so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-20ARM: ux300: Fix unimplementable regulation constraintsMark Brown
It doesn't make sense to grant permission to change the status of a regulator that is also set as always on and similarly it doesn't make sense to allow a driver to change the voltage of a regulator which can only be set to a single voltage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-19Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"Russell King
This reverts commit 9f85550347f51c79a917b2aec04c90691c11e20a. Peter Zijlstra says: | Argh, how did that ever make it upstream, please drop. | | Russell, please make that go away upstream. | | Like I said, this is both completely the wrong way to solve, and you're | so not paying attention, see: | | 5fbd036b552f633abb394a319f7c62a5c86a9cd7 | 2baab4e90495ebc9826c93f79d74d6e60a828d24 | e3831edd59edf57ca11fc289f08961b20baf5146 | | What's even worse: | | git describe --contains 9f85550347f51c79a917b2aec04c90691c11e20a --match "v*" | v3.4-rc3~1^2~3 | | that nonsense got merged long after those other commits. Linus Walleij says: | My bad, was because the initial patch was submitted march 9th before | these fixes were merged: | http://marc.info/?l=linux-arm-kernel&m=133159655513844&w=2 | | It was pending for a while in Russell's patch tracker and I | rebased it to -rc2 without paying enough attention to recent | related scheduler fixes ... lesson learned. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-06 14:01:19 +0000