summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-10-25Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', ↵Russell King
'p2v', 'pgt' (early part) and 'smp' into for-linus
2011-10-22ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PMDomenico Andreoli
v2: - register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be conditionally compiled out, it is already optimized out on !CONFIG_PM - fix also s3c2412 and s3c2416 affected by the same build issue v1: s3c2440.c fails to build if !CONFIG_PM because in such case s3c2410_pm_syscore_ops is not defined. Same error should happen also in s3c2410.c and s3c2442.c Signed-off-by: Domenico Andreoli <cavokz@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-21ARM: S5P: fix offset calculation on gpio-interruptMarek Szyprowski
Offsets of the irq controller registers were calculated correctly only for first GPIO bank. This patch fixes calculation of the register offsets for all GPIO banks. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-20ARM: smp: fix clipping of number of CPUsRussell King
Rather than clipping the number of CPUs using the compile-time NR_CPUS constant, use the runtime nr_cpu_ids value instead. This allows the nr_cpus command line option to work as expected. Cc: <stable@kernel.org> Reported-by: Mark Salter <msalter@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7114/1: cache-l2x0: add resume entry for l2 in secure modeBarry Song
we save the l2x0 registers at the first initialization, and platform codes can get them to restore l2x0 status after wakeup. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7090/1: CACHE-L2X0: filter start address can be 0 and is often 0Barry Song
this patch fixes the error in Rob Herring's ARM: 7009/1: l2x0: Add OF based initialization http://www.spinics.net/lists/arm-kernel/msg131123.html it has been in rmk/for-next with commit 41c86ff5b Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7089/1: L2X0: add explicit cpu_relax() for busy wait loopBarry Song
using cpu_relax in busy loops is a well-known idiom in the kernel. It's more for documentation purposes than technically needed here. Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7009/1: l2x0: Add OF based initializationRob Herring
This adds probing for ARM L2x0 cache controllers via device tree. Support includes the L210, L220, and PL310 controllers. The binding allows setting up cache RAM latencies and filter addresses (PL310 only). Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7116/1: debug: provide dummy default option for DEBUG_LL UART choiceWill Deacon
Defaulting to DEBUG_ICEDCC will cause systems to hang during boot unless a hardware debugger is listening to the debug comms. channel. This patch adds a dummy UART option as the default DEBUG_LL choice which requires the platform to do the right thing. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7097/1: debug: Move DEBUG_ICEDCC into the DEBUG_LL choiceStephen Boyd
DEBUG_ICEDCC support is just another DEBUG_LL choice and selecting it along with other DEBUG_LL options doesn't make much sense. Put it into the DEBUG_LL choice to avoid confusion. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7096/1: debug: Add UART1 config choicesStephen Boyd
ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) didn't notice that the Kconfigs relied on being unselected to configure a different serial port. Since there is no NONE option in a choice menu, explicitly add the other option so that both serial ports can be selected. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviourWill Deacon
Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UARTWill Deacon
Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7115/4: move __exception and friends to asm/exception.hJamie Iles
The definition of __exception_irq_entry for CONFIG_FUNCTION_GRAPH_TRACER=y needs linux/ftrace.h, but this creates a circular dependency with it's current home in asm/system.h. Create asm/exception.h and update all current users. v4: - rebase to rmk/for-next v3: - remove redundant includes of linux/ftrace.h v2: - document the usage restricitions of __exception* Cc: Zoltan Devai <zdevai@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7124/1: smp: Add a localtimer handler callable from C codeShawn Guo
In order to be able to handle localtimer directly from C code instead of assembly code, introduce handle_local_timer(), which is modeled after handle_IRQ(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7123/1: smp: Add an IPI handler callable from C codeShawn Guo
In order to be able to handle IPI directly from C code instead of assembly code, introduce handle_IPI(), which is modeled after handle_IRQ(). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7100/1: smp_scu: remove __init annotation from scu_enable()Shawn Guo
When Cortex-A9 MPCore resumes from Dormant or Shutdown modes, SCU needs to be re-enabled. This patch removes __init annotation from function scu_enable(), so that platform resume procedure can call it to re-enable SCU. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7061/1: gic: convert logical CPU numbers into physical numbersWill Deacon
The GIC driver must convert logical CPU numbers passed in from Linux into physical CPU numbers that are understood by the hardware. This patch uses the new cpu_logical_map macro for performing the conversion inside the GIC driver. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7060/1: smp: populate logical CPU mapping during bootWill Deacon
To allow booting Linux on a CPU with physical ID != 0, we need to provide a mapping from the logical CPU number to the physical CPU number. This patch adds such a mapping and populates it during boot. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7011/1: Add ARM cpu topology definitionVincent Guittot
The affinity between ARM processors is defined in the MPIDR register. We can identify which processors are in the same cluster, and which ones have performance interdependency. We can define the cpu topology of ARM platform, that is then used by sched_mc and sched_smt. The default state of sched_mc and sched_smt config is disable. When enabled, the behavior of the scheduler can be modified with sched_mc_power_savings and sched_smt_power_savings sysfs interfaces. Changes since v4 : * Remove unnecessary parentheses and blank lines Changes since v3 : * Update the format of printk message * Remove blank line Changes since v2 : * Update the commit message and some comments Changes since v1 : * Update the commit message * Add read_cpuid_mpidr in arch/arm/include/asm/cputype.h * Modify header of arch/arm/kernel/topology.c * Modify tests and manipulation of MPIDR's bitfields * Modify the place and dependancy of the config * Modify Noop functions Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-16Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS ARM: 7122/1: localtimer: add header linux/errno.h explicitly ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9 ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES
2011-10-15ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUSZoltan Devai
This is unneeded and causes an abort on the SPMP8000 platform. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zoltan Devai <zoss@devai.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-15ARM: 7122/1: localtimer: add header linux/errno.h explicitlyShawn Guo
Per the text in Documentation/SubmitChecklist as below, we should explicitly have header linux/errno.h in localtimer.h for ENXIO reference. 1: If you use a facility then #include the file that defines/declares that facility. Don't depend on other header files pulling in ones that you use. Otherwise, we may run into some compiling error like the following one, if any file includes localtimer.h without CONFIG_LOCAL_TIMERS defined. arch/arm/include/asm/localtimer.h: In function ‘local_timer_setup’: arch/arm/include/asm/localtimer.h:53:10: error: ‘ENXIO’ undeclared (first use in this function) Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-15ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9Will Deacon
Using COHERENT_LINE_{MISS,HIT} for cache misses and references respectively is completely wrong. Instead, use the L1D events which are a better and more useful approximation despite ignoring instruction traffic. Reported-by: Alasdair Grant <alasdair.grant@arm.com> Reported-by: Matt Horsnell <matt.horsnell@arm.com> Reported-by: Michael Williams <michael.williams@arm.com> Cc: stable@kernel.org Cc: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-10Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: mach-ux500: enable fix for ARM errata 754322 ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init ARM: OMAP: Fix i2c init for twl4030 ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
2011-10-10ARM: tegra: fix compilation error due to mach/hardware.h removalMarc Dietrich
This fixes a compilation error in cpu-tegra.c which was introduced in dc8d966bccde ("ARM: convert PCI defines to variables") which removed the now obsolete mach/hardware.h from the mach-tegra subtree. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-08Merge branch 'omap/fixes-for-3.1' into fixesArnd Bergmann
2011-10-07ARM: mach-ux500: enable fix for ARM errata 754322srinidhi kasagar
This applies ARM errata fix 754322 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-06ARM: 7077/1: LPAE: Use a mask for physical addresses in page table entriesCatalin Marinas
With LPAE, the physical address mask is 40-bit while the page table entry is 64-bit. This patch introduces PHYS_MASK for the 2-level page table format, defined as ~0UL. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-06ARM: 7076/1: LPAE: Add (pte|pmd)val_t type definitions as u32Catalin Marinas
This patch defines the (pte|pmd)val_t as u32 and changes the page table types to be based on these. The PMD bits are converted to the corresponding type using the _AT macro. The flush_pmd_entry/clean_pmd_entry argument was changed to (void *) to allow them to be used with both PGD and PMD pointers and avoid code duplication. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-06ARM: 7075/1: LPAE: Factor out 2-level page table definitions into separate filesCatalin Marinas
This patch moves page table definitions from asm/page.h, asm/pgtable.h and asm/ptgable-hwdef.h into corresponding *-2level* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-02ARM: include linux/highmem.h in uaccess functionsArnd Bergmann
When highpte support is enabled, this is required to build the kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: common/vic: use proper __iomem annotationsArnd Bergmann
In vic_init, we pass addr into readl, so it needs to be a pointer, not a u32 address. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: OC_ETM should not select ARM_AMBAArnd Bergmann
The CONFIG_ARM_AMBA symbol is selected by the platforms that support AMBA, and the other platforms (e.g. orion) might not be able to build that code at all when they do not support the clk API. Instead, make sure that OC_ETM is only built on platforms that do support the amba subsystem already. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: pci: always export pcibios_bus_to_resourceArnd Bergmann
Some PCI drivers call pcibios_bus_to_resource directly, but it is only exported when CONFIG_HOTPLUG is set, because it was initially mean for pccard support. Moving the export out of the #ifdef lets us avoid these build errors: ERROR: "pcibios_bus_to_resource" [drivers/video/vt8623fb.ko] undefined! ERROR: "pcibios_bus_to_resource" [drivers/video/arkfb.ko] undefined! ERROR: "pcibios_bus_to_resource" [drivers/video/s3fb.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: add io{read,write}{16,32}be functionsArnd Bergmann
These functions are used in some PCI drivers with big-endian MMIO space, and they are trivial to add here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: limit CONFIG_HAVE_IDE to platforms that doArnd Bergmann
Support for IDE drivers should not be automatic, since most platforms cannot actually support any IDE low-level drivers. This partly reverts 2064c946e "ARM: always select HAVE_IDE" to set this symbol only when either a PC-style bus (PCI, ISA, PCMCIA) is enabled or a platform is used that is known to have an existing driver in drivers/ide. New platforms should not need this option and just use CONFIG_ATA with drivers/ata/. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: pm: let platforms select cpu_suspend supportArnd Bergmann
Support for the cpu_suspend functions is only built-in when CONFIG_PM_SLEEP is enabled, but omap3/4, exynos4 and pxa always call cpu_suspend when CONFIG_PM is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: vfp: use -mfloat-abi=soft to build vfpArnd Bergmann
Distros are starting to ship with toolchains defaulting to hardfloat. Using such a compiler to build the kernel fails in the VFP directory with arch/arm/vfp/entry.S:1:0: sorry, unimplemented: -mfloat-abi=hard and VFP Adding -mfloat-abi=soft to the gcc command line fixes this. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: allow building alignment.c without PROC_FSArnd Bergmann
The two functions cpu_is_v6_unaligned and safe_usermode are only defined when CONFIG_PROC_FS is enabled, but are used outside of the #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Dave Martin <dave.martin@linaro.org>
2011-10-01ARM: always use ARM_UNWIND for thumb2 kernelsArnd Bergmann
Thumb2 kernels cannot be built with frame pointers, but can use the ARM_UNWIND feature for unwinding instead. This makes sure that all features that rely on unwinding includeing CONFIG_LATENCYTOP and FAULT_INJECTION_STACKTRACE_FILTER do not enable frame pointers when the unwinder is already selected, and we always build with the unwinder when we want a thumb2 kernel, to make sure we do not get the frame pointers instead. A different option would be to redefine the CONFIG_FRAME_POINTERS option on ARM to mean builing with either frame pointers or the unwinder, and then select which one to use based on the CPU architecture or another user option. That would still allow building thumb2 kernels without the unwinder but would also be more confusing. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: SMP depends on MMUArnd Bergmann
The SMP implementation on ARM heavily depends on MMU-only code. As long as nobody is interested in fixing this, let's disable the SMP option when building for nommu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: export rtc_lock for nvram driverArnd Bergmann
The rtc_lock is used by both the nvram and rtc drivers, so we need to export it if at least one of the two is built, not just for the rtc driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGESLinus Walleij
The VM subsystem assumes that there are valid memmap entries from the bank start aligned to MAX_ORDER_NR_PAGES. On the Ux500 we have a lot of mem=N arguments on the commandline triggering this bug several times over and causing kernel oops messages. Cc: stable@kernel.org Cc: Michael Bohan <mbohan@codeaurora.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Johan Palsson <johan.palsson@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-30ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_initAxel Lin
Current code calls omap4430_phy_init() twice in usb_musb_init(). Calling omap4430_phy_init() once is enough. This patch removes the first omap4430_phy_init() call, which using an uninitialized pointer as parameter. This patch elimates below build warning: arch/arm/mach-omap2/usb-musb.c: In function 'usb_musb_init': arch/arm/mach-omap2/usb-musb.c:141: warning: 'dev' may be used uninitialized in this function Signed-off-by: Axel Lin <axel.lin@gmail.com> Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP: Fix i2c init for twl4030Tony Lindgren
Looks like 2600 kHz rate does not work reliably on 2430, so just use the 100 kHz rate. Otherwise the system often fails to boot properly with: omap_i2c omap_i2c.2: timeout waiting for bus ready omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages twl: clock init err [-110] omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages TWL4030 Unable to unlock IDCODE registers --110 Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1Bryan Buckley
Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley <bryan.buckley@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsungLinus Torvalds
* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv
2011-09-27ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-27ARM: S5PV210: Rename sclk_cam clocks for FIMC media driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-23 09:53:35 +0000