summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-09-29OMAP4: hwmod data: Add watchdog timerBenoit Cousson
Add watchdog timer hwmod data for OMAP4 chip Note: wd_timer3 in enabled in the hwmod list but it is not yet supported by the watchdog driver. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29OMAP2430: hwmod data: Add watchdog timerVaradarajan, Charulatha
Add watchdog timer hwmod data for OMAP2430 chip Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Cousson, Benoit <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29OMAP2420: hwmod data: Add watchdog timerVaradarajan, Charulatha
Add watchdog timer hwmod data for OMAP2420 chip Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Cousson, Benoit <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29OMAP3: hwmod data: Add watchdog timerVaradarajan, Charulatha
Add watchdog timer hwmod data for OMAP3 chip Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Cousson, Benoit <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-28ARM: OMAP3LOGIC: Added SMSC Ethernet board supportTim Nordell
Enable SMSC911x Ethernet driver for LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board. Signed-off-by: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMCTim Nordell
Introduce of a generic way to setup smsc911x based Ethernet controller connected to GPMC similar to gpmc-smc91x but without timing setup. Signed-off-by: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28ARM: OMAP3LOGIC: Adding SDMMC supportTim Nordell
Add low-level initialization for hsmmc controller for LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board. Signed-off-by: Tim Nordell <tim.nordell@logicpd.com> [tony@atomide.com: updated for the recent mmc platform init changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board supportTim Nordell
Adding support for LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board. Signed-off-by: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28arm: remove cast from void*matt mooney
Unnecessary cast from void* in assignment. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap3: cm-t3517: add support for TI HECCIgor Grinberg
add support for TI HECC. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap3: cm-t3517: add support for NAND flashIgor Grinberg
add support for NAND flash. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap3: cm-t3517: add support for usb hostIgor Grinberg
add support for hsusb host ports 1, 2 and on-module usb hub. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap3: cm-t3517: add support for v3020 rtcIgor Grinberg
add support for v3020 rtc. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap3: Introduce CompuLab CM-T3517 moduleIgor Grinberg
Add basic suppot, enable uart and led. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27Merge branch 'omap4_and_sdrc_2.6.27' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
omap-for-linus
2010-09-27omap3: Prevent SDRC deadlock when L3 is changing frequencyJon Hunter
When changing the L3 clock frequency, the CPU is executing from internal RAM and the SDRC clock is disabled. During this time accesses made to external DDR are stalled. If the ARM subsystem attempts to access the DDR while the SDRC clock is disabled this will stall the CPU until the access to the SDRC timeouts. A timeout on the SDRC should never occur. Once a timeout occurs all the following accesses will be aborted and the DDR is no longer accessible. Although the code being executed in the internal RAM does not directly access the DDR, it was found that the branch prediction logic in the CPU may cause the CPU to prefetch code from a DDR location while the SDRC clock is disabled. This was causing an SDRC timeout which resulted in a system hang. This patch fixes this problem by ensuring the branch prediction logic is disabled while changing the L3 clock frequency. The branch prediction logic is disabled by clearing the Z-bit in the ARM CTRL register. Disabling the branch prediction logic does not have any noticable impact on the execution time of this code section. The hardware observability signals were used to monitor the sdrc idle time with and without this patch when operating at different CPU frequencies (150MHz, 500MHz and 600MHz) and the total sdrc idle time when changing frequenct was in the range of 9-11us. This was measured on an omap3430 SDP running the omapzoom p-android-omap-2.6.29 branch. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2010-09-27omap4: control: Fix the control module register accessesSantosh Shilimkar
This patch has multiple fixes together. To ensure that git bisect work across commits, all changes are clubbed together 1. Move the common control base address to control core 2. Remove the manually coeded defines and use the ones from headers. 3. Fix the the status register define in id.c for OMAP4 4. Fix all the register define in hsmmc.c 5. Use the control pad accessor API for omap4 hsmmc register accesses Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-27omap4: control: Add the register definition headersSantosh Shilimkar
On OMAP4, control module is divided into 4 separate IPs - OMAP44XX_CTRL_MODULE_CORE - OMAP44XX_CTRL_MODULE_PAD_CORE - OMAP44XX_CTRL_MODULE_WKUP - OMAP44XX_CTRL_MODULE_PAD_WKUP This patch adds all the omap4 control module register data and includes them in the common control.h The register data is autogenerated from the codebase thanks to Benoit Cousson efforts Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-27omap4: control: Add accessor api's for pad control moduleSantosh Shilimkar
On OMAP4 control pad are not addressable from control core base. So the common omap_ctrl_read/write APIs breaks Hence export separate APIs to manage the omap4 pad control registers. This APIs will work only for OMAP4 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-27omap4: control: Add ctrl_pad_base to omap_globalsSantosh Shilimkar
On omap4 control module is divided in four IP blocks. - CTRL_MODULE_CORE 0x4a002000 - CTRL_MODULE_PAD_CORE 0x4a100000 - CTRL_MODULE_WKUP 0x4a30c000 - CTRL_MODULE_PAD_WKUP 0x4a31e000 Addressing all the modules with single base address is not possible considering 16 bit offsets. The mux code manages the pad core and pad wakeup related base address inside the mux framework. For other usage only control core and control pad bases are necessary. So this patch maps only needed pad control base address which is used by device drivers and infrastructure code The main control core base is still kept same in this patch to keep git-bisect working. This will be fixed in the relevant patch in this series. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-27OMAP4: clocks: Fix ES2 clock issuesBenoit Cousson
Fix a few OMAP4430 clock tree problems after the recent manual merge of the various ES2 clock patches: - usim optional clock and its parent had the same name, rename the parent usim_fclk -> usim_ck - OPTFCLKEN_CLK32K is not handled anymore by the USBPHYOCP2SCP module in ES2 Create a new clock that belongs to CM_ALWON_USBPHY_CLKCTRL register This patch depends on some of the PRCM macro updates from Rajendra. Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: tweaked patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-27OMAP4: powerdomain: Update DSS logic state for ES2Rajendra Nayak
DSS on ES2 supports only OSWR, hence remove the support for CSWR from the powerdomain framework. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-27OMAP4: PM: Define additional registers for ES2Rajendra Nayak
4430 ES2 has a few new registers added and a few modified from ES1. This patch adds all the register changes in PRM and CM for OMAP4430 ES2. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-27OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2Rajendra Nayak
This patch updates the PRM and CM register bitshifts and masks for OMAP4430 ES2.0. Replace as well the BITFIELD macro with the shift operator in order to be consistent with the previous OMAP2 & 3 format. Sort the register list in comments in order to have a consistent register order and avoid futur change during code generation. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-27OMAP4: clock: Add optional clock nodesBenoit Cousson
OMAP4 IP optional clocks require explicit enable in module CTRLCLK register. In order to allow that we have to create artificial clock nodes that represent this clock inputs in the IP. Notes: - Temporary use OMAP3 names for GPIO optional clocks until the GPIO hwmod convertion is done. It will enforce the usage of OMAP4 names as the reference. - Temporary use OMAP3 names for TIMER main clock (gptX_fck) until TIMER hwmod convertion is done. During that convertion, the new name will have to be used. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-27OMAP4: clock: Fix clock names and align with hwmod namesBenoit Cousson
The OMAP4 hwmod data introduced the new naming convention for TI IPs (See patch OMAP4: hwmod: Add partial hwmod support for OMAP4430 ES1.0) The leaf clock names are using the same IP name and thus must be modified to match the clock populated in the hwmod data. - Fix some leaf clocks nodes that were using a _iclk instead of the _fclk prefix. - Fix some wrong interface clock name for master IPs connected to interconnect. Please not that due to the fact that nodes are sorted by name, the name change will introduce a quite ugly diff a little bit hard to follow. Timers clock con_id is still using the old gptX_fck name until the gptimer driver is updated to omap_device framework. Timers entries in hwmods DB are still disabled until the migration if timer to platform_driver + omap_hwmod. Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: manually resolved conflicts with Rajendra's clock patch] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-27OMAP4: clocks: Update clock tree for ES2Rajendra Nayak
This patch updates the clock tree with all the changes in OMAP4430 ES2. clock nodes added -1- tie_low_clock_ck -2- abe_dpll_bypass_clk_mux_ck clock nodes deleted -1- dpll_sys_ref_clk -2- per_sgx_fclk -3- usbphyocp2scp_ick Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> [paul@pwsan.com: added comment re ES1 clocks to top of file] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-27update OMAP Kconfig help texts for all supported SoC modelsLennert Buytenhek
update OMAP Kconfig help texts for all supported SoC models Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27Merge branch 'devel-omap-smp-on-up' into omap-for-linusTony Lindgren
2010-09-27Merge branch 'devel-boards' into omap-for-linusTony Lindgren
2010-09-27Merge branch 'misc_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren
2010-09-27Merge branch 'devel-omap-misc' into omap-for-linusTony Lindgren
2010-09-27omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai
wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanupsJarkko Nikula
This 'legacy' OMAP2420 McBSP2 muxing code is currently broken after recent conversion to new mux code. The omap_mcbsp_request calling this code is usually called after booting whereas the omap_mux_init_signal is __init marked so null pointer dereference would occur. Fix this by removing the muxing code and let the bootloader or board file to do it if necessary. Remove also omap2_mcbsp_ops as there is no use for it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap: McBSP: Do not enable SRG in slave modePeter Ujfalusi
McBSP SRG (Sample Rate Generator) and FSG (Frame Sync Generator) is only needed to be enabled, when McBSP is master. In McBSP slave mode, the SRG, and FSG can be kept disabled, which might save some power at the end in this configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap: i2c: Avoid compilation error in case the header is included multiple timesSubramaniam C.A
Added defines to avoid compilation error. Signed-off-by: Subramaniam C.A <subramaniam.ca@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap: crypto: updates to enable omap aesDmitry Kasatkin
Updates to enable omap aes Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> [tony@atomide.com: updated to use CONFIG_ARCH_OMAP2/3 instead of old 24XX/34XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap: usb: fix build warningAnand Gadiyar
Fix this and similar build warnings when building with omap_4430sdp_defconfig. CC arch/arm/mach-omap2/board-4430sdp.o In file included from arch/arm/mach-omap2/board-4430sdp.c:36: arch/arm/plat-omap/include/plat/usb.h:109: warning: return type defaults to 'int' Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-24omap4: board-omap4panda: adding leds status1 and status2Ricardo Salveti de Araujo
At Pandaboard we have 2 status leds, so adding them with similar usage as we have for Beagleboard (heartbeat and mmc0). The patch basically adds the platform data required by leds-gpio driver. Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-24omap: 4430sdp board support for proximity sensorShubhrajyoti Datta
omap 4430sdp board support for the proximity sensor via GPIO keys. The proximity sensor is connected to GPIO and is registered as a GPIO key. - Making the default state of the sensor off at bootup - The init is called before platform_add_devices Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-24Merge branch 'omap_for_2.6.37' of ↵Tony Lindgren
git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into omap-for-linus
2010-09-24OMAP: hwmod: Set autoidle after smartidle during _sysc_enableHema HK
OMAP USBOTG module has a requirement to set the autoidle bit only after setting smartidle bit. Modified the _sys_enable api to set the smartidle first and then the autoidle bit. Setting this will not have any impact on the other modules. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Partha Basak <p-basak2@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-24OMAP4: PM: Declare idle modules as functional tooRajendra Nayak
The omap4_cm_wait_module_ready function would only check for the modules to be completely functional before declaring them ready to be accessed. There might also be instances where in the module is actually in idle (under h/w control) but should still be declared accessible, as the h/w control would make it functional when needed. Hence make omap4_cm_wait_module_ready return true in case the module is fully functional *or* in idle state. Fail only if the module is fully disabled or stuck intransition. The explaination from the TRM for the idlest bits on OMAP4 is as below for quick reference Module idle state: 0x0 func: Module is fully functional, including OCP 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep abortion 0x2 idle: Module is in Idle mode (only OCP part). It is functional if using separate functional clock 0x3 disabled: Module is disabled and cannot be accessed Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Partha Basak <p-basak2@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-24OMAP: omap_device: Fix to support multiple hwmods for a single deviceKishon Vijay Abraham I
Currently there is a bug in the existing omap_device core code when extracting the hwmod structures passed to omap_device_build_ss(). This bug gets exposed only when passing multiple hwmod structures to omap_device_build_ss() resulting in incorrect extraction from second hwmod structure. This fix uses the pointer to pointer to omap_hwmod structure (array of pointers to omap_hwmod structure) passed to omap_device_build_ss() to correctly extract the appropriate omap_hwmod structure. This patch has been created and tested on lo/master and mainline. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha V <charu@ti.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com>
2010-09-24omap4: Fix bootup crash observed with higher CPU clocksSantosh Shilimkar
This patch is temporary fix to below crash. This is observed when CPU is clocked more than 600 MHz. Unhandled fault: imprecise external abort (0x1406) at 0xbf9ef65c Internal error: : 1406 [#1] PREEMPT SMP last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.36-rc3+ #18) PC is at kernel_thread_helper+0x0/0x14 LR is at kernel_thread_helper+0x0/0x14 pc : [<c003ce14>] lr : [<c003ce14>] psr: 00000093 sp : dc83bff8 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : 00000000 r7 : 00000013 r6 : c003ce28 r5 : c008935c r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7f Table: 8000404a DAC: 00000017 Process swapper (pid: 2, stack limit = 0xdc83a2f0) Stack: (0xdc83bff8 to 0xdc83c000) bfe0: 00000000 ffffffff [<c003ce14>] (kernel_thread_helper+0x0/0x14) from [<fffffffe>] (0xfffffffe) Code: c03a0ba3 c03a5fcb c045c880 c0394035 (eb017701) ---[ end trace 1b75b31a2719ed1c ]--- The timer hwmod adaptation will eventually fix it in a proper way. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-09-24omap4: Panda: Add DEBUG_LL supportDavid Anders
Add support for use of DEBUG_LL for use with PandaBoard. Signed-off-by: David Anders <x0132446@ti.com>
2010-09-24omap4: l2x0: Fix init parameter for es2.0Santosh Shilimkar
On ES2.0 the L2 cache init parameter ineeds to be changed to take care of cache size. The cache size is 1MB on ES2.0 vs 512KB on ES1.0 This patch fixes the init parameter to update the same using dynamic cpu version check Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-09-24omap4: Update id.c and cpu.h for es2.0Santosh Shilimkar
This patch updates the id.c and cpu.h files to support omap4 ES2.0 silicon detection. Few initial omap4 es2 samples IDCODE is same as es1. So the patch uses ARM cpuid register to detect the ES version for such samples Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-09-24omap4: sram: Fix start addressVikram Pandita
On OMAP4 there is no need to have SRAM_BOOTLOADER_SZ provision Hence put this macro under CONFIG_ARCH_OMAP2PLUS check Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-09-24omap: sram: fix is_sram_locked checkVikram Pandita
For OMAP24xx/34xx/44xx: omap_type() returns the correct type: OMAP2_DEVICE_TYPE_TEST OMAP2_DEVICE_TYPE_EMU OMAP2_DEVICE_TYPE_SEC OMAP2_DEVICE_TYPE_GP OMAP2_DEVICE_TYPE_BAD In current implementation there are two problems: Problem 1: For 34xx, the current if check will never return true. Problem 2: For 24xx the correct type check should be with omap_type() function Verified by checking the TRM 24xx for CONTROL_STATUS register bits Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-05 17:39:39 +0000