summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-11-05ARM: OMAP3+: PM: VP: use uV for max and min voltage limitsNishanth Menon
Every PMIC has it's own eccentricities, For example, one of the PMIC has MSB set to 1 for a specific function - voltage enable! using an hardcoded value specific for TWL when copied over to such an implementation causes the system to crash as the MSB bit was 0 and the voltage got disabled!. Instead we use actual values and depend on the convertion routines to abstract out the eccentricities of each PMIC. With this, we can now move the voltages to a common location in voltage.h as they are no longer dependent on PMICs and expect the PMIC's conversion routines to set a cap if the voltage is out of reach for the PMIC. Reported-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-02Merge tag 'stable/for-linus-3.7-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Use appropriate macros instead of hand-rolling our own (ARM). - Fixes if FB/KBD closed unexpectedly. - Fix memory leak in /dev/gntdev ioctl calls. - Fix overflow check in xenbus_file_write. - Document cleanup. - Performance optimization when migrating guests. * tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/mmu: Use Xen specific TLB flush instead of the generic one. xen/arm: use the __HVC macro xen/xenbus: fix overflow check in xenbus_file_write() xen-kbdfront: handle backend CLOSED without CLOSING xen-fbfront: handle backend CLOSED without CLOSING xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF x86: remove obsolete comment from asm/xen/hypervisor.h
2012-10-30xen/arm: use the __HVC macroStefano Stabellini
Use the new __HVC macro in hypercall.S. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-28Merge tag 'fixes-for-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...
2012-10-27Revert "ARM i.MX25: Fix PWM per clock lookups"Arnd Bergmann
This reverts commit 92063cee118655d25b50d04eb77b012f3287357a, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-27ARM: versatile: fix versatile_defconfigArnd Bergmann
With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-27ARM: mvebu: update defconfig with 3.7 changesThomas Petazzoni
The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-27ARM: at91: fix at91x40 buildArnd Bergmann
patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-26Merge tag 'tty-3.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fix from Greg Kroah-Hartman: "Here is one patch, a revert of a omap serial driver patch that was causing problems, for your 3.7-rc tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: omap: fix software flow control"
2012-10-26Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: I/O address abuse cleanup
2012-10-26Merge branch 'v3.7-samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: One is spi stuff for fix the device names for the different subtypes of the spi controller. And the other is adding missing .smp field for exynos4-dt and fixing memory sections for exynos4210-trats board. * 'v3.7-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dt ARM: dts: Split memory into 4 sections for exynos4210-trats ARM: SAMSUNG: Add naming of s3c64xx-spi devices Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-26Revert "ARM: dma-mapping: support debug_dma_mapping_error"Marek Szyprowski
This reverts commit 871ae57adc5ed092c1341f411514d0e8482e2611, which is scheduled for v3.8 and accidently got into v3.7-rc series. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-25Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A random collection of various fixes, mainly from Arnd and a few other people. Not thing really stands out here." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: drop experimental status for hotplug and Thumb2 ARM: 7560/1: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic mode ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD ARM: 7555/1: kexec: fix segment memory addresses check ARM: warnings in arch/arm/include/asm/uaccess.h ARM: binfmt_flat: unused variable 'persistent' ARM: be really quiet when building with 'make -s' ARM: pass -marm to gcc by default for both C and assembler ARM: Xen: fix initial build problems ARM: export default read_current_timer ARM: Fix another build warning in arch/arm/mm/alignment.c ARM: export set_irq_flags ARM: kprobes: make more tests conditional
2012-10-25Merge branch 'fixes_for_linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and DMA-mapping fixes from Marek Szyprowski: "This consists mainly of a set of one-liner fixes and cleanups for a few minor issues identified in both Contiguous Memory Allocator code and ARM DMA-mapping subsystem." * 'fixes_for_linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: mm: Remove unused arm_vmregion priv field ARM: dma-mapping: fix build warning in __dma_alloc() ARM: dma-mapping: support debug_dma_mapping_error mm: cma: alloc_contig_range: return early for err path drivers: cma: Fix wrong CMA selected region size default value drivers: dma-coherent: Fix typo in dma_mmap_from_coherent documentation drivers: dma-contiguous: Don't redefine SZ_1M
2012-10-25ARM: socfpga: Fix socfpga compilation with early_printk() enabledPavel Machek
This fixes early_printk() compilation for socfpga. (senduart/busyuart/waituart were missing). It does that by making Picochip code generic. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25ARM: SPEAr: Remove unused empty filesViresh Kumar
Few empty files (spear1310_misc_regs.h and spear1340_misc_regs.h) are created by commit b31e23726 "SPEAr13xx: Add header files". Don't know how they got added, obviously my fault :) But nobody could even catch them in reviews. Remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge tag 'omap-for-v3.7-rc2/fixes-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren <tony@atomide.com>: Timer fix for am33xx, runtime PM fix for UART, audio McBSP fixes, mux and pinctrl fixes, and Beagle OPP fix. * tag 'omap-for-v3.7-rc2/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ARM: OMAP3: Beagle: fix OPP customization and initcall ordering ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. ARM: OMAP2+: Fix location of select PINCTRL ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio ARM: OMAP2: UART: fix console UART mismatched runtime PM status ARM: OMAP3: PM: apply part of the erratum i582 workaround Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesArnd Bergmann
Patches from Sascha Hauer <s.hauer@pengutronix.de>: ARM i.MX fixes for 3.7-rc * tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM i.MX25: Fix PWM per clock lookups ARM i.MX25 clk: Fix nfc_ipg_per parent ARM i.MX25: Fix lcdc_ipg_per parent clock ARM: mxc: platform-mxc-mmc: Fix register region size ARM: imx: clk-imx27: Fix divider width field ARM: imx: fix the return value check in imx_clk_busy_divider() ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60 ARM: imx: fix return value check in imx3_init_l2x0() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge branch 'for-rcs-3.7' of ↵Arnd Bergmann
git://git.linaro.org/people/ljones/linux-3.0-ux500 into fixes * 'for-rcs-3.7' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann
From Nicolas Ferre <nicolas.ferre@atmel.com>: A mix of typos and critical fixes. The most important ones are a duplicated definition of a Kconfig variable and the handling of external interrupts for non-DT case. The new at91sam9g10 was suffering a recognition issue due to an ID mis-interpreted: this was leading to a kernel panic. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: (257 commits) ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25ARM: dts: mxs: add the "clock-names" for gpmi-nandHuang Shijie
The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand. So the gpmi-nand driver could not find the proper clock. This patch fixes this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25ARM: ux500: Correct SDI5 address and add some format changesLee Jones
Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-25ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DTLee Jones
Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-25ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKELee Jones
This patch fixes the build error below: arch/arm/mach-ux500/cpu.c: In function ‘ux500_init_irq’: arch/arm/mach-ux500/cpu.c:55:2: error: invalid use of undefined type ‘struct irq_chip’ arch/arm/mach-ux500/cpu.c:55:24: error: ‘IRQCHIP_SKIP_SET_WAKE’ undeclared (first use in this function) arch/arm/mach-ux500/cpu.c:55:24: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-ux500/cpu.c:55:48: error: ‘IRQCHIP_MASK_ON_SUSPEND’ undeclared (first use in this function) Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24Revert "serial: omap: fix software flow control"Felipe Balbi
This reverts commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6 (serial: omap: fix software flow control). As Russell has pointed out, that commit isn't fixing Software Flow Control at all, and it actually makes it even more broken. It was agreed to revert this commit and use Russell's latest UART patches instead. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24ARM: at91: drop duplicated config SOC_AT91SAM9 entryJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-10-24ARM: at91/i2c: change id to let i2c-at91 workBo Shen
The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
2012-10-24ARM: at91/i2c: change id to let i2c-gpio workBo Shen
The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> [very long time]
2012-10-24ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.Marek Belisko
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-24ARM: at91: fix external interrupt specification in board codeNicolas Ferre
Since the switch to sparse irq, we have to add the NR_IRQS_LEGACY offset to static irq numbers. It has been forgotten on these SPI irq definitions in board code. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> [v3.6]
2012-10-24ARM: at91: fix external interrupts in non-DT caseNicolas Ferre
Management of external interrupts has changed but the non-DT code has not integrated these changes. Add a mask to pass external irq specification from SoC specific code to the at91_aic_init() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> [v3.6]
2012-10-24ARM: at91: at91sam9g10: fix SOC type detectionIvan Shugov
Newer at91sam9g10 SoC revision can't be detected, so the kernel can't boot with this kind of kernel panic: "AT91: Impossible to detect the SOC type" CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Atmel AT91SAM9G10-EK Ignoring tag cmdline (using the default kernel command line) bootconsole [earlycon0] enabled Memory policy: ECC disabled, Data cache writeback Kernel panic - not syncing: AT91: Impossible to detect the SOC type [<c00133d4>] (unwind_backtrace+0x0/0xe0) from [<c02366dc>] (panic+0x78/0x1cc) [<c02366dc>] (panic+0x78/0x1cc) from [<c02fa35c>] (at91_map_io+0x90/0xc8) [<c02fa35c>] (at91_map_io+0x90/0xc8) from [<c02f9860>] (paging_init+0x564/0x6d0) [<c02f9860>] (paging_init+0x564/0x6d0) from [<c02f7914>] (setup_arch+0x464/0x704) [<c02f7914>] (setup_arch+0x464/0x704) from [<c02f44f8>] (start_kernel+0x6c/0x2d4) [<c02f44f8>] (start_kernel+0x6c/0x2d4) from [<20008040>] (0x20008040) The reason for this is that the Debug Unit Chip ID Register has changed between Engineering Sample and definitive revision of the SoC. Changing the check of cidr to socid will address the problem. We do not integrate this check to the list just above because we also have to make sure that the extended id is disregarded. Signed-off-by: Ivan Shugov <ivan.shugov@gmail.com> [nicolas.ferre@atmel.com: change commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.1] # since commit 8c3583b6
2012-10-24ARM: mm: Remove unused arm_vmregion priv fieldLaurent Pinchart
Commit e9da6e9905e639b0f842a244bc770b48ad0523e9 ("ARM: dma-mapping: remove custom consistent dma region") removed the last users of the field. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-24ARM: dma-mapping: fix build warning in __dma_alloc()Jingoo Han
Fix build warning in __dma_alloc() as below: arch/arm/mm/dma-mapping.c: In function '__dma_alloc': arch/arm/mm/dma-mapping.c:653:29: warning: 'page' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-24Merge tag 'stable/for-linus-3.7-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen bug-fixes from Konrad Rzeszutek Wilk: - Fix mysterious SIGSEGV or SIGKILL in applications due to corrupting of the %eip when returning from a signal handler. - Fix various ARM compile issues after the merge fallout. - Continue on making more of the Xen generic code usable by ARM platform. - Fix SR-IOV passthrough to mirror multifunction PCI devices. - Fix various compile warnings. - Remove hypercalls that don't exist anymore. * tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: dbgp: Fix warning when CONFIG_PCI is not enabled. xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit xen: balloon: use correct type for frame_list xen/x86: don't corrupt %eip when returning from a signal handler xen: arm: make p2m operations NOPs xen: balloon: don't include e820.h xen: grant: use xen_pfn_t type for frame_list. xen: events: pirq_check_eoi_map is X86 specific xen: XENMEM_translate_gpfn_list was remove ages ago and is unused. xen: sysfs: fix build warning. xen: sysfs: include err.h for PTR_ERR etc xen: xenbus: quirk uses x86 specific cpuid xen PV passthru: assign SR-IOV virtual functions to separate virtual slots xen/xenbus: Fix compile warning. xen/x86: remove duplicated include from enlighten.c
2012-10-23ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer ↵Vaibhav Hiremath
driverDate:Wed, 17 Oct 2012 13:55:55 -0500 Add dmtimer clock aliases for AM33XX devices so that the parent clock for the dmtimer can be set correctly by the dmtimer driver. Without these clock aliases the dmtimer driver will fail to find the parent clocks for the dmtimer. Verified that DMTIMERs can be successfully requested on AM335x beagle bone. Original patch was provided by Vaibhav Hiremath [1]. Changelog and additional verification performed by Jon Hunter. [1] http://marc.info/?l=linux-omap&m=134693631608018&w=2 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-23Merge tag 'for_3.7-rc3-fixes-pm' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-v3.7-rc2/fixes Misc. OMAP PM-related fixes for v3.7-rc
2012-10-23ARM: dma-mapping: support debug_dma_mapping_errorMing Lei
Without the patch, kind of below warning will be dumped if DMA-API debug is enabled: [ 11.069763] ------------[ cut here ]------------ [ 11.074645] WARNING: at lib/dma-debug.c:948 check_unmap+0x770/0x860() [ 11.081420] ehci-omap ehci-omap.0: DMA-API: device driver failed to check map error[device address=0x0000000 0adb78e80] [size=8 bytes] [mapped as single] [ 11.095611] Modules linked in: Cc: Russell King <linux@arm.linux.org.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-22ARM: OMAP3: Beagle: fix OPP customization and initcall orderingKevin Hilman
After commit 24d7b40a60cf19008334bcbcbd98da374d4d9c64 (ARM: OMAP2+: PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered using an existing CPU device, not the omap_device for MPU-SS. First, fix the board file to use get_cpu_device() as required by the above commit, otherwise custom OPPs will be added to the wrong device. Second, the board files OPP init is called from the its init_machine method, and the generic CPU devices are not yet created when init_machine is run. Therefore OPP initialization will fail. To fix, use a device_initcall() for the board file's OPP customization, and make the device_initcall board-specific by using a machine_is check. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-22Merge tag 'fixes-for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes
2012-10-22ARM: drop experimental status for hotplug and Thumb2Russell King
Both these features have been around for a long time now, and haven't had any recent issues brought up. So lets drop their experimental status. In any case, hotplugis selected by other non-experimental options which then cause a Kconfig warning. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-22ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals.Tony Lindgren
On n900 uart1 pins are not not used for uart, instead they are used to connect to a cell modem over ssi. Looks like we're currently missing these signal names for 3430 for some reason, and only have some of them listed for 3630. Obviously the signals are there for 3430 if n900 is using them and they are documented in some TRMs. Note that these will eventually be replaced by device tree based pinctrl-single.c driver. But for now these are needed to verify the SSI pins for devices like Nokia N900. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-22ARM: OMAP2+: Fix location of select PINCTRLTony Lindgren
Commit 8f31cefe (ARM: OMAP2+: select PINCTRL in Kconfig) added select PINCTRL, but accdentally added it to a wrong location. We want to select if for ARCH_OMAP2PLUS, not for ARCH_OMAP2PLUS_TYPICAL. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-22ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audioPeter Ujfalusi
Fixes the following errors: [ 2.318084] omap-mcbsp 49022000.mcbsp: invalid rx DMA channel [ 2.324432] omap-mcbsp 49024000.mcbsp: invalid rx DMA channel Which is because we failed to link the sidetone hwmod for McBSP2/3. The missing sidetone hwmod link will prevent omap_device_alloc() to append the DMA resources since we - accidentally - end up having the same number of resources provided from DT (IO/IRQ) as we have in hwmod for the McBSP ports without the ST resources. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-22ARM: OMAP2: UART: fix console UART mismatched runtime PM statusKevin Hilman
The runtime PM framework assumes that the hardware state of devices when initialized is disabled. For all omap_devices, we idle/disable device by default. However, the console uart uses a "no idle" option during omap_device init in order to allow earlyprintk usage to work seamlessly during boot. Because the hardware is left partially enabled after init (whatever the bootloader settings were), the omap_device should later be fully initialized (including mux) and the runtime PM framework should be told that the device is active, and not disabled so that the hardware state is in sync with runtime PM state. To fix, after the device has been created/registered, call omap_device_enable() to finialize init and use pm_runtime_set_active() to tell the runtime PM core the device is enabled. Tested on 2420/n810, 3530/Overo, 3530/Beagle, 3730/OveroSTORM, 3730/Beagle-xM, 4460/PandaES. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Felipe Balbi <balbi@ti.com> Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-22ARM: OMAP3: PM: apply part of the erratum i582 workaroundPaul Walmsley
On OMAP34xx/35xx, and OMAP36xx chips with ES < 1.2, if the PER powerdomain goes to OSWR or OFF while CORE stays at CSWR or ON, or if, upon chip wakeup from OSWR or OFF, the CORE powerdomain goes ON before PER, the UART3/4 FIFOs and McBSP2/3 SIDETONE memories will be unusable. This is erratum i582 in the OMAP36xx Silicon Errata document. This patch implements one of several parts of the workaround: the addition of the wakeup dependency between the PER and WKUP clockdomains, such that PER will wake up at the same time CORE_L3 does. This is not a complete workaround. For it to be complete: 1. the PER powerdomain's next power state must not be set to OSWR or OFF if the CORE powerdomain's next power state is set to CSWR or ON; 2. the UART3/4 FIFO and McBSP2/3 SIDETONE loopback tests should be run if the LASTPOWERSTATEENTERED bits for PER and CORE indicate that PER went OFF while CORE stayed on. If loopback tests fail, then those devices will be unusable until PER and CORE can undergo a transition from ON to OSWR/OFF and back ON. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-22ARM: 7560/1: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic modeLinus Walleij
The periodic mode is currently calculated by a simple division but we should pay more attention to our integer arithmetics. Also delete a comment that does not make any sense. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-22ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_countWill Deacon
When booting a secondary CPU, the primary CPU hands two sets of page tables via the secondary_data struct: (1) swapper_pg_dir: a normal, cacheable, shared (if SMP) mapping of the kernel image (i.e. the tables used by init_mm). (2) idmap_pgd: an uncached mapping of the .idmap.text ELF section. The idmap is generally used when enabling and disabling the MMU, which includes early CPU boot. In this case, the secondary CPU switches to swapper as soon as it enters C code: struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); cpu_switch_mm(mm->pgd, mm); This causes a problem on ARMv7, where the identity mapping is treated as strongly-ordered leading to architecturally UNPREDICTABLE behaviour of exclusive accesses, such as those used by atomic_inc. This patch re-orders the secondary_start_kernel function so that we switch to swapper before performing any exclusive accesses. Cc: <stable@vger.kernel.org> Cc: David McKay <david.mckay@st.com> Reported-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-22ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dtTomasz Figa
This patch adds missing initializer of .smp field of machine descriptor of EXYNOS 4 DT machine. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-19Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc fixes from Olof Johansson: "A set of fixes and some minor cleanups for -rc2: - A series from Arnd that fixes warnings in drivers and other code included by ARM defconfigs. Most have been acked by corresponding maintainers (and seem quite hard to argue not picking up anyway in the few exception cases). - A few misc patches from the list for integrator/vt8500/i.MX - A batch of fixes to OMAP platforms, fixing: - boot problems on beaglebone, - regression fixes for local timers - clockdomain locking fixes - a few boot/sparse warnings - For Tegra: - Clock rate calculation overflow fix - Revert a change that removed timer clocks and a fix for symbol name clashes - For Renesas: - IO accessor / annotation cleanups to remove warnings - For Kirkwood/Dove/mvebu: - Fixes for device trees for Dove (some minor cleanups, some fixes) - Fixes for the mvebu gpio driver - Fix build problem for Feroceon due to missing ifdefs - Fix lsxl DTS files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2 gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck ARM: OMAP: resolve sparse warning concerning debug_card_init() ARM: OMAP4: Fix twd_local_timer_register regression ARM: tegra: add tegra_timer clock ARM: tegra: rename tegra system timer ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-20 18:07:47 +0000