summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-12-19arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpioStephen Warren
The pinctrl device name is included in the pinctrl map table, and used as a parameter to pin_config_*() functions. Hence, it must be the same for non-DT and DT kernels. Add AUXDATA to cause this. The GPIO device name will be used by the pinmux/GPIO initialization code in a later patch, and needs to stay constant. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19arm/tegra: Split Seaboard GPIO table to allow for VentanaStephen Warren
Seaboard and Ventana share some GPIOs, but others are different. Split the GPIO table into common, seaboard-specific, and ventana-specific tables, so that only the correct ones are enabled for each board. Add a few missing audio-related GPIOs for Ventana. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19arm/tegra: refresh defconfig for tegra30Olof Johansson
Update the defconfig for tegra due to the addition of tegra30 and rename of t20/t30 options. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-12-19arm/tegra: Seaboard: Add GPIO key device tree nodesStephen Warren
This brings all the GPIO key definitions from board-seaboard.c into tegra-seaboard.dtsi. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19arm/dt: Add ADT7461 to SeaboardStephen Warren
The ADT7461 is a temperature monitoring IC. One is present on the DVC I2C bus on Seaboard. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19arm/dt: tegra: Use new compatible value for DVC I2C controllerStephen Warren
Update the device tree to indicate which I2C controller is the DVC controller. AUXDATA needs to be updated too, since the compatible value changed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19Merge branch 'arm/common-kconfig-refactor+for-rmk' of ↵Russell King
git://git.linaro.org/people/dmart/linux-2.6-arm into devel-stable
2011-12-19fbdev: sh_mobile_lcdc: Support FOURCC-based format APILaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-12-19imx6q: Remove unconditional dependency on l2x0 L2 cache supportDave Martin
The i.MX6 Quad SoC will work without the l2x0 L2 cache controller support built into the kernel, so this patch removes the dependency on CACHE_L2X0. This makes the l2x0 support optional, so that it can be turned off when desired for debugging purposes etc. Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to select that option explicitly from SOC_IMX6Q. Thanks to Shawn Guo for this suggestion. [1] [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19highbank: Unconditionally require l2x0 L2 cache controller supportDave Martin
If running in the Normal World on a TrustZone-enabled SoC, Linux does not have complete control over the L2 cache controller configuration. The kernel cannot work reliably on such platforms without the l2x0 cache support code built in. This patch unconditionally enables l2x0 support for the Highbank SoC. Thanks to Rob Herring for this suggestion. [1] [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com>
2011-12-19omap4: Unconditionally require l2x0 L2 cache controller supportDave Martin
If running in the Normal World on a TrustZone-enabled SoC, Linux does not have complete control over the L2 cache controller configuration. The kernel cannot work reliably on such platforms without the l2x0 cache support code built in. This patch unconditionally enables l2x0 support for the OMAP4 SoCs. Thanks to Rob Herring for this suggestion. [1] [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
2011-12-19ARM: SMP: Refactor Kconfig to be more maintainableDave Martin
Making SMP depend on (huge list of MACH_ and ARCH_ configs) is bothersome to maintain and likely to lead to merge conflicts. This patch moves the knowledge of which platforms are SMP-capable to the individual machines. To enable this, a new HAVE_SMP config option is introduced to allow machines to indicate that they can run in a SMP configuration. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> (for nomadik, ux500) Acked-by: Tony Lindgren <tony@atomide.com> (for omap) Acked-by: Kukjin Kim <kgene.kim@samsung.com> (for exynos) Acked-by: Sascha Hauer <s.hauer@pengutronix.de> (for imx) Acked-by: Olof Johansson <olof@lixom.net> (for tegra)
2011-12-19ARM: l2x0/pl310: Refactor Kconfig to be more maintainableDave Martin
Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) is bothersome to maintain and likely to lead to merge conflicts. This patch moves the knowledge of which platforms have a L2x0 or PL310 cache controller to the individual machines. To enable this, a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow machines to indicate that they may have such a cache controller independently of each other. Boards/SoCs which cannot reliably operate without the L2 cache controller support will need to select CACHE_L2X0 directly from their own Kconfigs instead. This applies to some TrustZone-enabled boards where Linux runs in the Normal World, for example. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> (for cns3xxx) Acked-by: Tony Lindgren <tony@atomide.com> (for omap) Acked-by: Shawn Guo <shawn.guo@linaro.org> (for imx) Acked-by: Kukjin Kim <kgene.kim@samsung.com> (for exynos) Acked-by: Sascha Hauer <s.hauer@pengutronix.de> (for imx) Acked-by: Olof Johansson <olof@lixom.net> (for tegra)
2011-12-19enable uncompress log on cpuimx35sdEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19cpuimx35: fix touchscreen supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19cpuimx35sd: fix KconfigEric Bénard
in 0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c I fixed the mach-types records. We also need to make the name consistent in Kconfig else the machine_is_eukrea_cpuimx35sd macro fails, and thus audio codec is not properly initalized. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19clock-imx35: fix reboot in internal boot modeEric Bénard
commit 8d75a26 "ARM: mx35: use generic function for displaying silicon revision" disabled IIM clock after reading silicon revision which will prevent reboot in internal boot mode. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Jason Liu <jason.hui@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19imx_v4_v5_defconfig: update default configurationEric Bénard
- add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19cpuimx25sd: fix KconfigEric Bénard
in 0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c I fixed the mach-types records. We also need to make the name consistent in Kconfig else the machine_is_eukrea_cpuimx25sd macro fails, and thus audio codec is not properly initalized. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19arm/imx: fix cpufreq section mismatchRichard Zhao
WARNING: arch/arm/plat-mxc/built-in.o(.data+0x488): Section mismatch in reference from the variable mxc_driver to the function .init.text:mxc_cpufreq_init() The variable mxc_driver references the function __init mxc_cpufreq_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19ARM:imx:fix pwm period valueJason Chen
According to imx pwm RM, the real period value should be PERIOD value in PWMPR plus 2. PWMO (Hz) = PCLK(Hz) / (period +2) Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@kernel.org
2011-12-19ARM: u300: delete memory.hLinus Walleij
Last merge window the memory maps for U300 were simplified so we can now safely delete memory.h. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-19ARM: ux500: fix the smp_twd clock calculationLinus Walleij
The clock for the smp_twd block is not equal to the CPU frequency, actually it is divided by two, so fix this, and set the initial frequency to half of 1GHz which is the most common case. Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-19ARM: ux500: remove support for early silicon revisionsLinus Walleij
The DB8500 ED (Early Drop) and V1 are only available inside of ST-Ericsson or partners, we have actively replaced and scrapped these prototypes. All Nova products on the open market (such as the Snowball board) are based on V2 and later ASIC variants. So let us focus on supporting the silicon that will be used and delete this to get a clear overview. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-19ARM: ux500: update register filesLinus Walleij
A few new addresses for newly supported peripherals and SRAM base offsets. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-19ARM: ux500: register DB5500 PMU dynamicallyRabin Vincent
Use platform_device_register_simple() rather than a static struct, so we create and register the PMU device on-the-fly. Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-19ARM: ux500: update ASIC detection for U5500Linus Walleij
This adds a few CPU identification functions for the U5500 variants. Contains portions of code written by Rabin Vincent. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-19ARM: ux500: support DB8520Rabin Vincent
Extend the ux500 ID table to cover the DB8520 variant. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-18ARM: 7233/1: ux500: remove overlapping iotable entriesLinus Walleij
The overlapping iotable mapping entries for the ux500 Cortex A9 SCU, CPU control and TWD are no longer accepted by the kernel. Remove the overlaps so the machine boots again. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtimeMarc Zyngier
sched_clock() is yet another blocker on the road to the single image. This patch implements an idea by Russell King: http://www.spinics.net/lists/linux-omap/msg49561.html Instead of asking the platform to implement both sched_clock() itself and the rollover callback, simply register a read() function, and let the ARM code care about sched_clock() itself, the conversion to ns and the rollover. sched_clock() uses this read() function as an indirection to the platform code. If the platform doesn't provide a read(), the code falls back to the jiffy counter (just like the default sched_clock). This allow some simplifications and possibly some footprint gain when multiple platforms are compiled in. Among the drawbacks, the removal of the *_fixed_sched_clock optimization which could negatively impact some platforms (sa1100, tegra, versatile and omap). Tested on 11MPCore, OMAP4 and Tegra. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Tested-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18ARM: picoxcell: implement watchdog restartJamie Iles
Allow the platform to be restarted by triggering the watchdog to expire with the shortest possible expiry. This should reset the CPU core and all on-chip peripherals. v2: - use writel_relaxed(). Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-12-18ARM: picoxcell: move io mappings to common.cJamie Iles
Now that we have lost our machine specific ioremap() we just have one mapping that covers all peripherals. Move this to common.c to simplify things a little. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-12-18ARM: picoxcell: don't reserve irq_descsJamie Iles
All irq_desc's are now dynamically allocated so we don't need to statically reserve them. v2: - select SPARSE_IRQ and set .nr_irqs to NR_IRQS_LEGACY to skip ISA and IRQ 0. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-12-18ARM: picoxcell: remove mach/memory.hJamie Iles
mach/memory.h is no longer required for simple platforms so remove it for picoxcell. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-12-17arm/tegra: add support for tegra30 based board cardhuPeter De Schrijver
Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: implement support for tegra30Peter De Schrijver
Add support for tegra30 SoC. This includes a device tree compatible type for this SoC ("nvidia,tegra30") and adds L2 cache initialization for this new SoC. The clock framework is still missing, which prevents most drivers from working. The basic IRQs are the same, so remove the dependency on CONFIG_ARCH_TEGRA_2x_SOC. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: pinmux tables and definitions for tegra30Peter De Schrijver
Define the pinmuxing and pindrive tables for tegra30. The pinmux table defines the available functions for each pinmux group. The pindrive table defines the default pullup or pulldowns for each group. Derived from code by Scott Williams (scwilliams@nvidia.com) Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: add new fields to struct tegra_pingroup_descPeter De Schrijver
Add new fields to struct tegra_pingroup_desc to support new hardware features introduced in the tegra30 SoC. The pinmux driver won't use those fields yet, but the tegra30 pinmux tables will already provide the necessary data. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: prepare pinmux code for multiple tegra variantsPeter De Schrijver
This patch modifies the pinmux code to be useable for multiple tegra variants. Some tegra20 specific constants will be replaced by variables which will be initialized to the appropriate value at runtime. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: rename tegra20 pinmux filesPeter De Schrijver
Rename pinmux-t2.h and pinmux-t2-tables.c to the new tegra naming. This file will be reworked somewhat in the next patch to support multiple tegra SoC types. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: generalize L2 cache initializationPeter De Schrijver
Generalize L2 cache initialization and discover L2 cache associativity at runtime. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: use PMC resetPeter De Schrijver
Use PMC reset rather then CAR system reset as recommended by the hardware team. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: rename board-dt.c to board-dt-tegra20.cPeter De Schrijver
Tegra20 based boards will be handled by the current board-dt.c file. Tegra30 based boards will be handled by a new board-dt-tegra30.c file. Hence rename the existing board-dt.c to board-dt-tegra20.c to reflect its use. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: prepare early init for multiple tegra variantsPeter De Schrijver
This patch splits the early init code in a common and a tegra20 specific part. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: don't export clk_measure_input_freqPeter De Schrijver
don't export clk_measure_input_freq as its functionality is also available using clk_get_rate(). Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: prepare clock code for multiple tegra variantsPeter De Schrijver
Rework the tegra20 clock code to support multiple tegra variants : * remove tegra2_periph_reset_assert/tegra2_periph_reset_deassert. This functionality should be in clock.c. * remove tegra_sdmmc_tap_delay and export tegra2_sdmmc_tap_delay directly. This feature is handled inside the sdmmc block from tegra30 onwards. So there is no need for support in the clock code beyond tegra20. There are no in tree users of this function. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: cleanup tegra20 supportPeter De Schrijver
* add a dependency to ARCH_TEGRA_2x_SOC in Kconfig to all tegra20 based boards and TEGRA_PCI * make powergating dependent on ARCH_TEGRA_2x_SOC * remove dependency on ARCH_TEGRA_2x_SOC for clock.c Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: clk_get should not be fatalPeter De Schrijver
The timer and rtc-timer clocks aren't gated by default, so there is no reason to crash the system if the dummy enable call failed. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17Merge remote-tracking branch 'rmk/devel-stable' into for-3.3/socOlof Johansson
Conflicts: arch/arm/mach-tegra/board-dt.c Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17arm/tegra: initial device tree for tegra30Peter De Schrijver
This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>