summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-05-08ARM: imx: eukrea_mbimxsd25: use IMX_GPIO_NREric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_mbimxsd25: don't free twice GPIO_SWITCH1Eric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_mbimxsd: add backlight and lcd supportDenis Carikli
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_cpuimx51sd: support rev2 PCBEric Bénard
rev1 were shipped with silicon 2.0, rev2 with silicon 3.0 so we are using the silicon version to know the PCB revision Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_mbimxsd: add audio supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_cpuimx51sd: add watchdog supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea-cpuimx51: remove boardEric Bénard
this board is not publicly available and is replaced by cpuimx51sd Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_mbimxsd35: add spi controler and spidev supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_cpuimx25: add watchdog supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_mbimxsd25: add spi controler and spidev supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx: eukrea_cpuimx25: enable workaround ENGcm09152Eric Bénard
this fix usb device controler behaviour in gadget mode Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: imx6q: switch to use pinctrl subsystemDong Aisheng
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: mxs: enable pinctrl dummy statesShawn Guo
The mxs pinctrl driver will only support DT probe. That said, the mxs device drivers can only get pinctrl state from pinctrl subsystem when the drivers get probed from device tree. Before converting the whole mxs platform support over to device tree, we need to enable pinctrl dummy states for those non-DT board files to ensure the pinctrl API adopted by mxs device drivers will work for both DT and non-DT probe. Instead of calling pinctrl_provide_dummies() directly in every board file, the patch introduces soc specific calls mx23_soc_init() and mx28_soc_init() for boards' .init_machine hook to invoke, so that any soc specific setup for non-DT boot only can be added there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: imx: enable pinctrl dummy statesDong Aisheng
Enable pinctrl dummy states for imx platforms without pinctrl support. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: ux500: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-08ARM: tegra: use machine specific hook for late initShawn Guo
Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2012-05-08ARM: shmobile: use machine specific hook for late initShawn Guo
Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
2012-05-08ARM: sa1100: use machine specific hook for late initShawn Guo
Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: s3c64xx: use machine specific hook for late initShawn Guo
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-08ARM: prima2: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Barry Song <baohua.song@csr.com>
2012-05-08ARM: pnx4008: use machine specific hook for late initShawn Guo
Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: omap2: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-08ARM: omap1: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-08ARM: msm: use machine specific hook for late initShawn Guo
Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: David Brown <davidb@codeaurora.org>
2012-05-08ARM: imx: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: exynos: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-08Merge branch 'smp/threadalloc' into smp/hotplugThomas Gleixner
Reason: Pull in the separate branch which was created so arch/tile can base further work on it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-08arm: Remove unused cpu_idle_wait()Thomas Gleixner
cpuidle uses a generic function now. Remove the unused code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/20120507175652.260797846@linutronix.de
2012-05-08ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.R Sricharan
The system dma module has capabiities register indicating the support for descriptor loading, constant fill, etc. Use this instead of OMAP revision check to identify the features supported runtime. This avoids patching the code for feature SOCs which has those capabilities. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08ARM: OMAP4: Reduce the static IO mappingSantosh Shilimkar
EMIF, GMPC and DMM driver can ioremap() the address space as part of driver intialisation and there is no need to have static IO mapping for them. Hence remove the un-used static IP space and let the respective drivers manage it as part if driver init. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08ARM: All OMAP2PLUS machines use omap2 directory so just add one entrySantosh Shilimkar
All OMAP2PLUS arch based machines makes use of mach-omap2 directory. So just add one entry so that there is no need to patch this file for any OMAP2+ devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.Santosh Shilimkar
cpu_class_is_omap2() contains all OMAP2+ devices. So update the DMA code cpu checks accordingly so that there is no need to patch the file for any future OMAP2+ devices. In long run, all these attributes should come from hwmod dev_attr based on DMA IP version. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08ARM: OMAP4: Remove un-used WakeupGen register defines.Santosh Shilimkar
Current OMAP code doesn't use any of the OMAP_WKG_ENB_SECURE_* registers. So remove those defines. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08ARM: OMAP2+: Clean up wrapping multiple objects in MakefileSantosh Shilimkar
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds.Santosh Shilimkar
Since OMAP4 code base now makes use of OMAP4 specific PRCM functions, cm2xxx_3xxx.c need not be compiled for OMAP4 only builds. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com>
2012-05-07Merge branches 'clock_am35xx_cleanup_3.5', 'prm_cm_devel_a_3.5', ↵Paul Walmsley
'clock_devel_a_3.5' and 'pwrdm_clkdm_cleanup_3.5' into prcm_devel_a_3.5
2012-05-07arm: omap3: clockdomain data: Remove superfluous commas from ↵Mark A. Greer
gfx_sgx_3xxx_wkdeps[] Clean up clockdomains3xxx_data.c a bit by removing the superfluous commas in gfx_sgx_3xxx_wkdeps[]. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() APISantosh Shilimkar
With patch 'ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()', the pwrdm_clkdm_state_switch() API becomes duplicate of pwrdm_state_switch(). Get rid off duplicate pwrdm_clkdm_state_switch() and update the users of it with pwrdm_state_switch() Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP3: clock data: add clockdomain for HDQ functional clockPaul Walmsley
Add the correct clockdomain for the HDQ functional clock. This is needed for the clock and hwmod PM code to work correctly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de>
2012-05-07ARM: OMAP3+: dpll: Configure autoidle mode only if it's supportedVaibhav Bedia
The current DPLL code enables and disables autoidle features without checking whether the autoidle register is available. Fix this by putting a check for the existence of the autoidle register in the DPLL data. With such a check in place, for DPLLs which do not support this feature, simply skipping the autoidle_reg entry in the DPLL data is sufficient. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP2+: dmtimer: cleanup iclk usageTarun Kanti DebBarma
We do not use iclk anywhere in the dmtimer driver and so removing it. Hence removing the timer iclk entries from OMAP4 clkdev table as well. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP4+: Add prm and cm base init function.R Sricharan
Instead of statically defining seperate arrays for every OMAP4+ archs, have a generic init function to populate the arrays. This avoids the need for creating new array for every arch added in the future that reuses the prm and cm registers read/write code. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common headerVaibhav Hiremath
Add missing idle_st bit for 32k-sync timer into the prcm-common header file, required for hwmod data. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP3: Fix CM register bit masksRajendra Nayak
The register bits for MPU_CLK_SRC and IVA2_CLK_SRC in CM_CLKSEL1_PLL register are 3 bits wide. Fix the MASK definition accordingly. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP: clock: convert AM3517/3505 detection/flags to AM35xxKevin Hilman
To improve the clarity of the code, replace the CK_3517 flag used in the clock data with CK_AM35XX. The CK_3505 flag can also be removed, since it is now unused. Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP3: clock data: treat all AM35x devices the sameKevin Hilman
The init for 3505/3517 specific clocks depends on the ordering of cpu_is checks, is error prone and confusing (there are 2 separate checks for cpu_is_omap3505()). Remove the 3505-specific checking since CK_3505 flag is not used, and treat all AM35x clocks the same. This means that the SGX clock (the only AM35x clkdev not currently flagged for 3505) will now be registered on 3505, but that is harmless. That can be cleaned up when the clkdev nodes are removed in favor of them being registered by hwmod. Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07ARM: OMAP3: clock data: replace 3503/3517 flag with AM35x flag for UART4Kevin Hilman
The AM35x UART4 is common to all AM35x devices, so use CK_AM35XX instead of (CK_3505 | CK_3517), which is equivalent. Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07Merge branch 'for_3.5/cleanup/omap-cpuidle' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into cleanup-cpuidle
2012-05-07Merge tag 'gadget-for-v3.5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: gadget: patches for v3.5 This pull request is quite big, but mainly because there's a giant rework of the s3c_hsotg.c driver to make it friendlier for other users. Samsung Exynos platforms use the DesignWare Core USB2 IP from Synopsys so it's a bit unfair to have the driver work for Samsung platforms only. In short, the big rework is in preparation to make the driver more reusable. Another big rework in this pull request came from Ido, where he's removing the redundant pointer for the endpoint descriptor from the controller driver's own endpoint representation. The same pointer is available through the generic struct usb_ep structure. Also on this pull request is the conversion of a few extra controller drivers to the new style registration, which allows multiple controllers to be available on the same platform and helps remove global pointers from those drivers. Together with those big changes, there's the usual fixes and cleanups to gadget drivers. Nothing major.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:49:38 +0000