summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-11-28ARM: imx: Get the silicon version from the IIM moduleDinh Nguyen
Instead of reading the silicon version from ROM, we should read the SREV register from the IIM. Freescale has dropped all support for MX51 REV1.0, only MX51 REV 2.0 and 3.0 are valid. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: imx: Add mx53 support to common msl functions.Dinh Nguyen
Add mx53 support to cpu.c and mm.c. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: imx: Add core definitions for MX53Dinh Nguyen
Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24mx51_babbage: Add SPI flash supportFabio Estevam
MX51 Babbage has an AT45DB321 SPI Flash connected to eCSPI1. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-24ARM i.MX27 pm: return gracefully on different socsSascha Hauer
Code called from an initcall can be maybe called for machines it's not intended for. So check for valid machines and return gracefully if an incompatible machine is found. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51: return gracefully on different socsSascha Hauer
Code called from an initcall can be maybe called for machines it's not intended for. So check for valid machines and return gracefully if an incompatible machine is found. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX DMA: return gracefully on different socsSascha Hauer
Code called from an initcall can be maybe called for machines it's not intended for. So check for valid machines and return gracefully if an incompatible machine is found. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51: Make CONFIG_MXC_TZIC an invisible optionSascha Hauer
There's no point showing this option to the user. The correct value will be selected anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX irq: Compile avic irq code only on SoCs that need itSascha Hauer
This patch adds a Kconfig option for the avic irq controller and lets the SoCs that need it select this option. Also, as we have two irq controllers for i.MX, irq.c is not appropriate anymore, so rename it to avic.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51 boards: Do not use PHYS_OFFSETSascha Hauer
PHYS_OFFSET may become a variable once the runtime PHYS_OFFSET patch is merged, so use MX51_PHYS_OFFSET for boot_params. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24mx51_3ds: Add esdhc supportFabio Estevam
Add support for esdhc on mx51_3ds board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx: fix iomux v3Arnaud Patard (Rtp)
Commit "ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookie" (b705cb4d42e95a4a43a8945571c8613e71526c3d) introduced a typo which was preventing my efikamx to boot. This patch is fixing that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add resetArnaud Patard (Rtp)
The efikamx board is using a gpio to reset the board so add support for it Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add spi nor supportArnaud Patard (Rtp)
On efikamx, uboot is stored on a nor spi flash. Add support for it Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: fix gpio_4_24 and gpio_4_25 pad configurationArnaud Patard (Rtp)
s/NO_PAD_CTRL/MX51_GPIO_PAD_CTRL/ Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add support for power keyArnaud Patard (Rtp)
This patch adds support for power key button of the efika mx. It's connected on GPIO 2 31. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add leds supportArnaud Patard (Rtp)
The efika mx a 3 leds (1 blue, 1 red, 1 green) connected on GPIOS 3 13/14/15. Also, some special care is done for default trigger of blue led for mmc as the mmc host used is different between hw revisions Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: add gpio mode for csi1 {h,v}syncArnaud Patard (Rtp)
Add definitions for configuring CSI1_{H,V}SYNC as GPIO Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add mmc supportArnaud Patard (Rtp)
The efika mx is using a esdhc host for mmc support. Now that the sdhci has support for it, enable it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: enhance iomux configuration for esdhc supportArnaud Patard (Rtp)
- add definition to configure pads as ESDHC{1,2} WP and CD Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: fix iomux configurationArnaud Patard (Rtp)
- ALT0 is used to set GPIO mode of GPIO_1_{2,3,4,5,6,7,8,9} but it's ALT1 for GPIO_1_{0,1}. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: read board idArnaud Patard (Rtp)
read board id value from the GPIO3_16/17/11 Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24mx31_3ds: Add touchscreen supportFabio Estevam
On the mx31_3ds board the touchscreen feature is provided by MC13783 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookieLothar Waßmann
The following patch is a first step to convert the 'struct pad_desc' to a bitmapped cookie to facilitate adding platform specific pullup or drive strength definitions to existing pad definitions without need to rewrite the complete pad def. The patch wraps 'struct pad_desc' in an opaque data type and introduces macros to access the individual members. This patch does not constitute any functional change! Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24Merge branch 'imx-for-2.6.38' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Sascha Hauer
into imx-for-2.6.38
2010-11-19ARM: imx: fix name for functions adding sdhci-esdhc-imx devicesUwe Kleine-König
and restore alphabetic ordering. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3/mx35_3ds: Add watchdog supportUwe Kleine-König
This bases on a patch by Fabio Estevam who added the device before it was allocated dynamically. Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate imx-keypad devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate imx2-wdt devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate mxc-ehci devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
While adapting the #defines for this I noticed that the offset used for USB HS on i.MX35 differs from the documented offset. I kept the working offset and commented that the documentation differs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate mxc_rnga devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically register mxc-mmc devicesUwe Kleine-König
Compared to the static devices the dynamic have a DMA resource. This should be save as it seems unused in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: introduce SOC_IMX31 and SOC_IMX35Uwe Kleine-König
Additionally convert some known to be good usages to the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: use an MX35 constant in imx35 only codeUwe Kleine-König
... instead of MX3x Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: move registration of gpios to plat-mxc/gpio.cUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: use SOC_IMX25 instead of ARCH_MX25 for multi-SoCUwe Kleine-König
Some usages of ARCH_MX25 are assuming that if it is defined the other SoCs are undefined. Use SOC_IMX25 for the save places. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: let the machines select SOC_IMX{21,27}Uwe Kleine-König
This prepares multi-SoC kernel support. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: let IMX_HAVE_PLATFORM_IMX_FB select HAVE_FB_IMXUwe Kleine-König
This way FB_IMX can just depend on HAVE_FB_IMX and machines just need to select IMX_HAVE_PLATFORM_IMX_FB without bothering about HAVE_FB_IMX. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: move mx25 support to mach-imxUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx25: remove now empty devices.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx25: dynamically allocate mx2-camera devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx25: dynamically allocate imx2-wdt devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocatate imx-fb devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate imxdi_rtc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate imx-keypad devicesUwe Kleine-König
The mxc-keypad device seems to be the result of an early and partial merge of the keypad driver. It's unused and there is no corresponding driver available, so just remove it. Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: move registration of gpios to plat-mxc/gpio.cUwe Kleine-König
To use common macros to define the gpio ports for imx{1,21,25,27} the existing ones had to made more general and a few more base address defines were necessary. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate mxc_pwm devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate mxc-ehci devicesUwe Kleine-König
According to the reference manual of the i.MX25 the host controller uses an offset of 0x200 not 0x400 as was specified in the resources for mxc_usbh2. Needs-Testing: yes Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 14:28:40 +0000