summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-10-20Merge branch 'linus' into irq/coreIngo Molnar
Merge reason: update to almost-final-.36 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-16arm: Use ARCH_IRQ_INIT_FLAGSThomas Gleixner
The core code now initializes the requested number of interrupts and sets the flags in irq_desc.status which are requested by the architecture via ARCH_IRQ_INIT_FLAGS. Add ARCH_IRQ_INIT_FLAGS and remove the loop which sets those flags after the irq descriptors are allocated. [ This patch should have been in the original irq rework and got dropped accidentaly ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-10-16genirq, ARM: Fix boot on ARM platformsAnand Gadiyar
Commit b683de2b3 in linux-next as of 20101014 (genirq: Query arch for number of early descriptors) seems to have broken bootup on several ARM boards - my beagleboard gives the following dump with earlyprintk: NR_IRQS:402 Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = c0004000 [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.36-rc7-next-20101014-linux-next-20101012+ #40) PC is at init_IRQ+0x14/0x48 LR is at start_kernel+0x150/0x2c0 [...] We seem to be using desc->status without assigning desc to anything. Fix this by adding back the code that was originally there. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org LKML-Reference: <1287077397-21781-1-git-send-email-gadiyar@ti.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: relax ioremap prohibition (309caa9) for -final and -stable ARM: 6440/1: ep93xx: DMA: fix channel_disable cpuimx27: fix i2c bus selection cpuimx27: fix compile when ULPI is selected ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors ARM: fix section mismatch warnings in Versatile Express ARM: 6412/1: kprobes-decode: add support for MOVW instruction ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
2010-10-13Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: iommu-load cam register before flushing the entry
2010-10-13ARM: relax ioremap prohibition (309caa9) for -final and -stableRussell King
... but produce a big warning about the problem as encouragement for people to fix their drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-12Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-10-12ARM: 6440/1: ep93xx: DMA: fix channel_disableMika Westerberg
When channel_disable() is called, it disables per channel interrupts and waits until channels state becomes STATE_STALL, and then disables the channel. Now, if the DMA transfer is disabled while the channel is in STATE_NEXT we will not wait anything and disable the channel immediately. This seems to cause weird data corruption for example in audio transfers. Fix is to wait while we are in STATE_NEXT or STATE_ON and only then disable the channel. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-12pci: Convert msi to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk>
2010-10-12Merge branch 'x86/urgent' of into irq/sparseirqThomas Gleixner
Reason: Pull in the latest io_apic bugfixes Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12genirq: Query arch for number of early descriptorsThomas Gleixner
sparse irq sets up NR_IRQS_LEGACY irq descriptors and archs then go ahead and allocate more. Use the unused return value of arch_probe_nr_irqs() to let the architecture return the number of early allocations. Fix up all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-08cpuimx27: fix i2c bus selectionEric Bénard
Recent clean of i.MX devices registration changed the i2C bus number selected for our platform (Freescale start peripheral ID at 1, kernel now start it at 0 so i.MX27's i2c 1 is kernel's i2c 0). Without this fix, i2c is unusable on this platform. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-08cpuimx27: fix compile when ULPI is selectedEric Bénard
without this patch we get : arch/arm/mach-imx/built-in.o: In function `eukrea_cpuimx27_init': eukrea_mbimx27-baseboard.c:(.init.text+0x44c): undefined reference to `mxc_ulpi_access_ops' Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-08ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9Tony Lindgren
Commit 14eff1812679c76564b775aa95cdd378965f6cfb added proper detection for ARM11MPCore/Cortex-A9 instead of detecting them as ARMv7. However, it was missing the HWCAP_TLS flags. HWCAP_TLS is needed if support for earlier ARMv6 is compiled into the same kernel. Without HWCAP_TLS flags the userspace won't work unless nosmp is specified: Kernel panic - not syncing: Attempted to kill init! CPU0: stopping <c005d5e4>] (unwind_backtrace+0x0/0xec) from [<c004c2f8>] (do_IPI+0xfc/0x184) <c004c2f8>] (do_IPI+0xfc/0x184) from [<c03f25bc>] (__irq_svc+0x9c/0x160) Exception stack(0xc0565f80 to 0xc0565fc8) 5f80: 00000001 c05772a0 00000000 00003a61 c0564000 c05cf500 c003603c c0578600 5fa0: 80033ef0 410fc091 0000001f 00000000 00000000 c0565fc8 c00b91f8 c0057cb4 5fc0: 20000013 ffffffff [<c03f25bc>] (__irq_svc+0x9c/0x160) from [<c0057cb4>] (default_idle+0x30/0x38) [<c0057cb4>] (default_idle+0x30/0x38) from [<c005829c>] (cpu_idle+0x9c/0xf8) [<c005829c>] (cpu_idle+0x9c/0xf8) from [<c0008d48>] (start_kernel+0x2a4/0x300) [<c0008d48>] (start_kernel+0x2a4/0x300) from [<80008084>] (0x80008084) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-08ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processorsAnders Larsen
According to Atmel, their 926T processors (AT91 post RM9200) requires 'Wait for Interrupt' mode be entered right after disabling the processor clock in order to minimise current consumption when idle, so do both provided we're not running on a 920T (an RM9200). Furthermore, get rid of the #ifndef CONFIG_DEBUG_KERNEL, since arch_idle() can be turned off completely with the kernel parameter 'nohlt'. Cc: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-08ARM: SAMSUNG: Add a workaround for get_clock() for serial driverMarek Szyprowski
Serial drivers call get_clock() very early, before platform bus has been set up, this requires a special check to let them get a proper clock. Without this patch, a serial console is broken on S5PV310 and S5PC210 boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: fix coding-style] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-10-08ARM: S5P: Bug fix on errors of build with CONFIG_PREEMPT_NONESeungChull Suh
This patch adds header <linux/sched.h> into the below files for build with CONFIG_PREEMPT_NONE. arch/arm/mach-s5p6440/cpu.c arch/arm/mach-s5p6442/cpu.c arch/arm/mach-s5pc100/cpu.c arch/arm/mach-s5pv210/cpu.c Following is error message of in case of s5pv210_defconfig with CONFIG_PREEMPT_NONE. arch/arm/mach-s5pv210/cpu.c:91: error: implicit declaration of function 'need_resched' Signed-off-by: SeungChull Suh <sc.suh@samsung.com> [kgene.kim@samsung.com: removed mach-s5p64x0/cpu.c] [kgene.kim@samsung.com: added fix mach-s5p6440/cpu.c] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-08ARM: SAMSUNG: Fix build warnings because of unused codesKukjin Kim
This patch removes following unused codes for removing build warnings. arch/arm/plat-samsung/adc.c:438: warning: unused variable 'flags' arch/arm/mach-s5pv210/clock.c:176: warning: 's5pv210_clk_ip4_ctrl' defined but not used Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-05Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf trace scripting: Fix extern struct definitions perf ui hist browser: Fix segfault on 'a' for annotate perf tools: Fix build breakage perf, x86: Handle in flight NMIs on P4 platform oprofile, ARM: Release resources on failure oprofile: Add Support for Intel CPU Family 6 / Model 29
2010-10-05omap: iommu-load cam register before flushing the entryHari Kanigeri
The flush_iotlb_page is not loading the cam register before flushing the cam entry. This causes wrong entry to be flushed out from the TLB, and if the entry happens to be a locked TLB entry it would lead to MMU faults. The fix is to load the cam register with the address to be flushed before flushing the TLB entry. Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-05ARM: fix section mismatch warnings in Versatile ExpressRussell King
WARNING: vmlinux.o(.text+0xbf30): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clocksource_init() The function v2m_timer_init() references the function __init sp804_clocksource_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clocksource_init is wrong. WARNING: vmlinux.o(.text+0xbf3c): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clockevents_init() The function v2m_timer_init() references the function __init sp804_clockevents_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clockevents_init is wrong. WARNING: vmlinux.o(.text+0xc524): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:l2x0_init() The function ct_ca9x4_init() references the function __init l2x0_init(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of l2x0_init is wrong. WARNING: vmlinux.o(.text+0xc530): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:clkdev_add_table() The function ct_ca9x4_init() references the function __init clkdev_add_table(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of clkdev_add_table is wrong. WARNING: vmlinux.o(.text+0xc578): Section mismatch in reference from the function ct_ca9x4_init() to the (unknown reference) .init.data:(unknown) The function ct_ca9x4_init() references the (unknown reference) __initdata (unknown). This is often because ct_ca9x4_init lacks a __initdata annotation or the annotation of (unknown) is wrong. Fix these by making ct_ca9x4_init() and v2m_timer_init() both __init. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6412/1: kprobes-decode: add support for MOVW instructionWill Deacon
The MOVW instruction moves a 16-bit immediate into the bottom halfword of the destination register. This patch ensures that kprobes leaves the 16-bit immediate intact, rather than assume a 12-bit immediate and mask out the upper 4 bits. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flagsSantosh Shilimkar
The commit f1a2481c0 sets up the default flags for MT_MEMORY and MT_MEMORY_NONCACHED memory types. L_PTE_USER flag is wrongly set as default for these entries so remove it. Also adding the 'L_PTE_WRITE' flag so that these pages become read-write instead of just being read-only [this stops them being exposed to userspace, which is the main concern here --rmk] Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to ↵Will Deacon
data corruption On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur under very rare conditions due to a store buffer optimisation. This workaround sets a bit in the diagnostic register of the Cortex-A9, disabling the optimisation and preventing the problem from occurring. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-01Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: McBSP: tx_irq_completion used in rx_irq_handler omap: Fix compile dependency to LEDS_CLASS
2010-09-30oprofile, ARM: Release resources on failureRobert Richter
This patch fixes a resource leak on failure, where the oprofilefs and some counters may not released properly. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@kernel.org> # .35.x LKML-Reference: <20100929145225.GJ13563@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
2010-09-27ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tileWill Deacon
The PL310 on the ct-ca9x4 tile for the Versatile Express does not need to add additional latency when accessing its cache RAMs. Unfortunately, the boot monitor sets this up for an 8-cycle delay on reads and writes, resulting in greatly reduced memory performance when the L2 cache is enabled. This patch sets the L2 RAM latencies to the correct value of 1 cycle on the ct-ca9x4 tile before enabling the L2 cache. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-25ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICESantosh Shilimkar
On Davinci SRAM is mapped as MT_DEVICE becasue of the section mapping pre-requisite instead of intended MT_MEMORY_NONCACHED Since the section mapping limitation gets fixed with first patch in this series, the MT_MEMORY_NONCACHED can be used now. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-25ARM: 6408/1: omap: Map only available sram memorySantosh Shilimkar
Currently we map 1 MB section while setting up SRAM on OMAPs Regardless of the actual memory. The physical OCM RAM available on OMAP SOCs is in order of KBs. This patch maps only available sram and cleans up some un-necessary cpu_is_xxx checks. Mapping un-available or non-accessible(secure) memory on the newer ARM processor is dangerous. Because ARM CPUs can now speculatively prefetch, we should avoid mapping any no-existing or secure memory. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-25ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entriesSantosh Shilimkar
This patch populates the L1 entries for MT_MEMORY and MT_MEMORY_NONCACHED types so that at boot-up, we can map memories outside system memory at page level granularity Previously the mapping was limiting to section level, which creates unnecessary additional mapping for which physical memory may not present. On the newer ARM with speculation, this is dangerous and can result in untraceable aborts. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-25Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-25ARM: pxa: remove pr_<level> uses of KERN_<level>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-25ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configuredEric Miao
When CONFIG_PXA3xx is not selected, cpu_is_pxa3xx() doesn't expand to zero, which in some places doesn't result in correct optimization. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Reported-and-tested-by: Marek Vasut <marek.vasut@gmail.com>
2010-09-25ARM: pxa168: fix corrected reset vectorMark F. Brown
Reset vector for pxa168 is 0xffff_0000 not 0x0. This fix allows reboot to work Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-25ARM: pxa: Use PIO for PI2C communication on Palm27xMarek Vasut
Original idea by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-09-25ARM: pxa: Fix Vpac270 gpio_power for MMCMarek Vasut
GPIO 0 is valid, yet this platform doesn't have any power GPIO for MMC. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-09-23omap: McBSP: tx_irq_completion used in rx_irq_handlerScott Ellis
Looks like a typo from commit d6d834b010. Signed-off-by: Scott Ellis <scott@jumpnowtek.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-23genirq: Cleanup irq_chip->typename leftoversThomas Gleixner
3 years transition phase is enough. Cleanup the last users and remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Leo Chen <leochen@broadcom.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net>
2010-09-23ARM: 6401/1: plug a race in the alignment trap handlerNicolas Pitre
When the policy for user space is to ignore misaligned accesses from user space, the processor then performs a documented rotation on the accessed data. This is the result of the access being trapped, and the kernel disabling the alignment trap before returning to user space again. In kernel space we always want misaligned accesses to be fixed up. This is enforced by always re-enabling the alignment trap on every entry into kernel space from user space. No such re-enabling is performed when an exception occurs while already in kernel space as the alignment trap is always supposed to be enabled in that case. There is however a small race window when a misaligned access in user space is trapped and the alignment trap disabled, but the CPU didn't return to user space just yet. Any exception would be entered from kernel space at that point and the kernel would then execute with the alignment trap disabled. Thanks to Maxime Bizon <mbizon@freebox.fr> for providing a test module that made this issue reproducible. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-23ARM: 6406/1: at91sam9g45: fix i2c bus speedPeter Korsgaard
Use a correct udelay value to get bus speed around 100KHz. The udelay value was most likely copied from the older devices, but the 9g45 is signicantly faster (400MHz, DDR, ..), so a udelay of 2 gives a bus speed of around 190KHz, which is too fast for some devices. A udelay value of 5 gives a bus speed of around 90KHz here. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-23Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion
2010-09-22arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"FUJITA Tomonori
This fixes the regression caused by the commit 6fee48cd330c68 ("dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask"). ARM needs to clip the dma coherent mask for dmabounce devices. This restores the old trick. Note that strictly speaking, the DMA API doesn't allow architectures to do such but I'm not sure it's worth adding the new API to set the dma mask that allows architectures to clip it. Reported-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-19ARM: dove: fix __io() definition to use bus based offsetEric Miao
Signed-off-by: Eric Miao <eric.miao@canonical.com> Acked-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19ARM: kirkwood: Unbreak PCIe I/O portArnaud Patard
The support for the 2 pcie port of the 6282 has broken i/o port by switching *_IO_PHYS_BASE and *_IO_BUS_BASE. In fact, the patches reintroduced the same bug solved by commit 35f029e2514be209eb0e88c7d927f3bcc42a5cc2. So, I'm adding back *_IO_BUS_BASE in resource declaration and fix definition of KIRKWOOD_PCIE1_IO_BUS_BASE. With this change, the xgi card on my t5325 is working again. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Cc: stable@kernel.org
2010-09-19Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410 ARM: S3C64XX: Fix coding style errors on mach-real6410 ARM: S3C64XX: Prototype SPI devices ARM: S3C64XX: Fix dev-spi build ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr ARM: SAMSUNG: Fix on drive strength value ARM: S5PV210: Add FIMC clocks ARM: S5PV210: Reduce the iodesc length of systimer ARM: S5PV210: Update I2C-1 Clock Register Property. ARM: S5P: Decrease IO Registers memory region size on FIMC ARM: S5P: Fix DMA coherent mask for FIMC
2010-09-19ARM: Fix build error when using KCONFIG_CONFIGRussell King
Jonathan Cameron reports that when using the environment variable KCONFIG_CONFIG, he encounters this error: make[2]: *** No rule to make target `.config', needed by `arch/arm/boot/compressed/vmlinux.lds' Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasingCatalin Marinas
ARMv7 onwards requires that there are no aliases to the same physical location using different memory types (i.e. Normal vs Strongly Ordered). Access to SO mappings when the unaligned accesses are handled in hardware is also Unpredictable (pgprot_noncached() mappings in user space). The /dev/mem driver requires uncached mappings with O_SYNC. The patch implements the phys_mem_access_prot() function which generates Strongly Ordered memory attributes if !pfn_valid() (independent of O_SYNC) and Normal Noncacheable (writecombine) if O_SYNC. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6400/1: at91: fix arch_gettimeoffset falloutPeter Korsgaard
5cfc8ee0bb51 (ARM: convert arm to arch_gettimeoffset()) marked all of at91 AND at91x40 as needing ARCH_USES_GETTIMEOFFSET, and hence no high res timer support / accurate clock_gettime() - But only at91x40 needs it. Cc: stable@kernel.org Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Acked-by: John Stultz <johnstul@us.ibm.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-18ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410Darius Augulis
Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver platform data in board mach-real6410. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 18:00:49 +0000