summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-11-28ARM: at91: make smc register base soc independentJean-Christophe PLAGNIOL-VILLARD
now sam9_smc_configure will take as first parameter is the SMC id Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make pit register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: add ioremap_registers entry point to soc setupJean-Christophe PLAGNIOL-VILLARD
this will allow to ioremap the register of the PIT, PMC and others and make the code soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make rtt register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make dma register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make ecc register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make gpio register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2011-11-28ARM: at91: define CLOCK_TICK_RATE to bogus value except A91X40Jean-Christophe PLAGNIOL-VILLARD
We have a clocksource which renders CLOCK_TICK_RATE useless. Define it to a bogus value to get rid of some ifdeffery. use local LATCH for at91rm9200 timer but keep it for A91X40 as we do not use a clocksource Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-20Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: wire up process_vm_writev and process_vm_readv syscalls ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list ARM: 7158/1: add new MFP implement for NUC900 ARM: 7157/1: fix a building WARNING for nuc900 ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF ARM: 7155/1: arch.h: Declare 'pt_regs' locally ARM: 7154/1: mach-bcmring: fix build error in dma.c ARM: 7153/1: mach-bcmring: fix build error in core.c ARM: 7152/1: distclean: Remove generated .dtb files ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors ARM: 7149/1: spi/pl022: Enable clock in probe Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"
2011-11-20Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Suspend: Fix bug in suspend statistics update PM / Hibernate: Fix the early termination of test modes PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unset PM Sleep: Do not extend wakeup paths to devices with ignore_children set PM / driver core: disable device's runtime PM during shutdown PM / devfreq: correct Kconfig dependency PM / devfreq: fix use after free in devfreq_remove_device PM / shmobile: Avoid restoring the INTCS state during initialization PM / devfreq: Remove compiler error after irq.h update PM / QoS: Properly use the WARN() macro in dev_pm_qos_add_request() PM / Clocks: Only disable enabled clocks in pm_clk_suspend() ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix PM / shmobile: Don't skip debugging output in pd_power_up()
2011-11-17PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unsetRafael J. Wysocki
Fix build regression introduced by commit 056879d2f244001b2888cdc8cf (ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix) by moving the intialization of the A3SP domain to a separate function and providing an empty definition of it for CONFIG_PM unset. Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-17ARM: wire up process_vm_writev and process_vm_readv syscallsRussell King
These two syscalls were introduced during the last merge window. Add the entries into the ARM call tables for them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-14PM / shmobile: Avoid restoring the INTCS state during initializationRafael J. Wysocki
The SH7372 PM domain initialization routine calls pd_power_up() that executes the domain's .resume() callback, if present, and for the A4R domain this callback attepmts to restore the INTCS state from uninitialized data. To avoid that, introduce __pd_power_up() that will only execute the domain's .resume() callback if its second argument is 'true' and make the SH7372 PM domain initialization use it with 'false' as its second argument. Redefine pd_power_up() as a wrapper around __pd_power_up(). Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tracked-down-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-11-14Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: cpuidle single/global and last_state fixes ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h ARM: mach-shmobile: ap4evb: remove white space from end of line ARM: mach-shmobile: clock-sh7372: remove un-necessary index ARM: mach-shmobile: kota2: add comment out separator ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
2011-11-14Merge branch 'sh-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh: mailmap: Fix up some renesas attributions sh: clkfwk: Kill off remaining debugfs cruft. drivers: sh: Kill off dead pathname for runtime PM stub. drivers: sh: Generalize runtime PM platform stub. sh: Wire up process_vm syscalls. sh: clkfwk: add clk_rate_mult_range_round() serial: sh-sci: Fix up SH-2A SCIF support. sh: Fix cached/uncaced address calculation in 29bit mode
2011-11-12ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_listWill Deacon
setup_processor copies the arch_name and elf_name fields out of the selected proc_info_list into two fixed size buffers. Since the proc_info_list structure is defined in a proc_*.S assembly file, this can lead to subtle errors if the strings defined there are too long (for example, corrupting the machine ID). This patch uses snprintf instead of sprintf to ensure that these buffers are not overrun. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-12ARM: 7158/1: add new MFP implement for NUC900wanzongshun
This patch is to add new MFP implement in mfp.c,since nuc900 mmc driver needs this function support. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-12ARM: 7157/1: fix a building WARNING for nuc900wanzongshun
This patch is to fix a WARNING which is the "modpost: Found 1 section mismatch(es)" for nuc900 platform. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-12ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OFOlof Johansson
fae2b89ab1 (ARM: l2x0: add empty l2x0_of_init) adds a static inline function that returns -ENODEV, but at least on tegra cache-l2x0.h is included without errno.h being pulled in first, resulting in compile errors if OF isn't enabled: In file included from arch/arm/mach-tegra/common.c:26: arch/arm/include/asm/hardware/cache-l2x0.h: In function 'l2x0_of_init': arch/arm/include/asm/hardware/cache-l2x0.h:110: error: 'ENODEV' undeclared (first use in this function) arch/arm/include/asm/hardware/cache-l2x0.h:110: error: (Each undeclared identifier is reported only once arch/arm/include/asm/hardware/cache-l2x0.h:110: error: for each function it appears in.) Add errno.h to the include file to make it self-contained. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-11Merge branch 'picoxcell-fixes' of git://github.com/jamieiles/linux-2.6-ji ↵Olof Johansson
into fixes
2011-11-11Merge branch 'imx-fixes-for-arnd' of ↵Olof Johansson
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-11-11arm/imx: fix imx6q mmc error when mounting rootfsShawn Guo
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11arm/imx: fix AUTO_ZRELADDR selectionShawn Guo
The AUTO_ZRELADDR selection for ARCH_IMX_V4_V5 and ARCH_MX5 should really be mutually exclusive to ZBOOT_ROM just like what ARCH_IMX_V6_V7 does. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11arm/imx: fix the references to ARCH_MX3Shawn Guo
The config symbol ARCH_MX3 has been removed by commit 'a89cf59 arm/imx: merge i.MX3 and i.MX6', and it should not be referenced any more. The patch also change ARCH_MX* to SOC_IMX* for other platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11ARM: mx51/53: set pwm clock parent to ipg_perclkRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11ARM: mach-shmobile: cpuidle single/global and last_state fixesMagnus Damm
The following commits break cpuidle on SH-Mobile ARM: 46bcfad cpuidle: Single/Global registration of idle states e978aa7 cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state This patch remedies these issues by up-porting the SH-Mobile code to fit with the above introduced framework changes. It is worth noting that the new code becomes significantly cleaner, so these framework changes are very welcome. At the same time this breakage could probably have been avoided by grepping for "last_state" and "cpuidle_register_driver". Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.hKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.hKuninori Morimoto
This patch moves PORT_xx helper macro to sh_pfc.h, and it expects CPU_ALL_PORT() macro for each CPU Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.hKuninori Morimoto
This patch move PORT_DATA_xx helper macro to sh_pfc.h. and pfc-sh7372.c used it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: ap4evb: remove white space from end of lineKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: clock-sh7372: remove un-necessary indexKuninori Morimoto
it is not necessary to have sh7372_xxxx index on static variable Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: kota2: add comment out separatorKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: sh73a0: add MMC data pin pull-upKuninori Morimoto
This patch adds MMC data pin pull-up option for pfc-sh73a0.c, and select it on ag5evm board. The MMC read/write will be error without this patch. Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11drivers: sh: Generalize runtime PM platform stub.Paul Mundt
The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-09Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm ↵Olof Johansson
into fixes
2011-11-10ARM: mach-shmobile: sh7372 A3SP no_suspend_console fixMagnus Damm
If "no_suspend_irq" is used on the sh7372 Mackerel board with v3.2-rc1 then Suspend-to-RAM fails because the serial console tries to write to the SCIF driver even though the power domain is turned off. This patch checks the state of "console_suspend_enabled" to see if A3SP should be forced enabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-10PM / shmobile: Don't skip debugging output in pd_power_up()Guennadi Liakhovetski
Don't skip debugging output upon earlier loop termination in pd_power_up(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-09ARM: 7155/1: arch.h: Declare 'pt_regs' locallyFabio Estevam
Fix the following warning when building imx_v4_v5_defconfig target: CC arch/arm/mach-imx/mach-imx27ipcam.o In file included from arch/arm/mach-imx/mach-imx27ipcam.c:18: /home/fabio/linus/linux-2.6/arch/arm/include/asm/mach/arch.h:47: warning: 'struct pt_regs' declared inside parameter list /home/fabio/linus/linux-2.6/arch/arm/include/asm/mach/arch.h:47: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-imx/mach-imx27ipcam.c:78: warning: initialization from incompatible pointer type Declare 'struct pt_regs' locally. Cc: Eric Miao <eric.miao@canonical.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-09ARM: 7154/1: mach-bcmring: fix build error in dma.cMaxin B. John
Fixes this build error: CC arch/arm/mach-bcmring/dma.o arch/arm/mach-bcmring/dma.c: In function 'dma_request_channel_dbg': arch/arm/mach-bcmring/dma.c:1022: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) arch/arm/mach-bcmring/dma.c:1022: error: (Each undeclared identifier is reported only once arch/arm/mach-bcmring/dma.c:1022: error: for each function it appears in.) arch/arm/mach-bcmring/dma.c:1024: error: implicit declaration of function 'schedule' arch/arm/mach-bcmring/dma.c:1027: error: implicit declaration of function 'signal_pending' arch/arm/mach-bcmring/dma.c: In function 'dma_free_channel': arch/arm/mach-bcmring/dma.c:1092: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) arch/arm/mach-bcmring/dma.c: In function 'dma_map_add_region': arch/arm/mach-bcmring/dma.c:1946: error: dereferencing pointer to incomplete type arch/arm/mach-bcmring/dma.c:1948: error: dereferencing pointer to incomplete type arch/arm/mach-bcmring/dma.c:1955: error: dereferencing pointer to incomplete type make[1]: *** [arch/arm/mach-bcmring/dma.o] Error 1 make: *** [arch/arm/mach-bcmring] Error 2 Signed-off-by: Maxin B. John <maxin.john@gmail.com> Reviewed-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-09ARM: 7153/1: mach-bcmring: fix build error in core.cMaxin B. John
Fixes this build error: CC arch/arm/mach-bcmring/core.o arch/arm/mach-bcmring/core.c: In function 'bcmring_init_timer': arch/arm/mach-bcmring/core.c:238: error: implicit declaration of function 'sp804_clockevents_register' make[1]: *** [arch/arm/mach-bcmring/core.o] Error 1 make: *** [arch/arm/mach-bcmring] Error 2 Signed-off-by: Maxin B. John <maxin.john@gmail.com> Reviewed-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-09Merge branch 'for-3.2/fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes
2011-11-09arm/tegra: enable headphone detection gpio on seaboardYufeng Shen
Enable the headphone detection gpio on tegra platform. Signed-off-by: Yufeng Shen <miletus@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09arm/dt: Fix ventana SDHCI power-gpiosStephen Warren
Ventana uses the same SDHCI GPIOs as Seaboard; PI6 (70) is the power GPIO for the SD port, and there is no power GPIO for the MMC chip. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09arm/tegra: Don't create duplicate gpio and pinmux devicesStephen Warren
*_pinmux_init() register the GPIO and pinmux devices so that they're ready before any other device needs them. *_pinmux_init() are also called by board-dt.c in order to set up the GPIO and pinmux configurations. In this case, if we register the devices, they end up being probed once due to this registration, and a second time due to a device-tree node (or vice-versa). The second probe fails since the memory regions are already requested. Besides, we don't actually want the duplicated devices. To avoid this duplicate registration, modify *_pinmux_init() to check whether it's running on a DT machine. If not, register the pinmux devices. If so, don't register them. Finally, modify board-dt.c to call the *_pinmux_init() after all devices have been instantiated from device-tree. This allows the GPIO and pinmux devices to be instantiated and initialized before calling functions to configure the hardware. This has one disadvantage: The pinmux and GPIO initialization now happens after /all/ devices are instantiated, rather than after just gpio and pinmux but before anything else. So the correct HW configuration is not in place when e.g. the SD/MMC device is probed. Long-term, this should be solved by doing both: a) Initializing the HW state from DT nodes during GPIO and pinmux device probe. b) Using the deferred driver probe mechanism, so that drivers can defer their probe until after the gpio and pinmux drivers have probed. v2: s/int is_dt/bool is_dt/ v3: Use of_machine_is_compatible inside *_pinmux_init() rather than passing an explicit parameter into the function from outside. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
2011-11-09Merge branch 'imx/compile-fixes' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
2011-11-09ARM: at91: Fix USBA gadget registrationJochen Friedrich
Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register USBA adapters anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> CC: stable@kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09at91/yl-9200: Fix section mismatchJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09at91: vmalloc fix missing AT91_VIRT_BASE defineJean-Christophe PLAGNIOL-VILLARD
VMALLOC_END is defined in terms of AT91_VIRT_BASE but this needs mach/hardware.h for it's definition. In file included from arch/arm/mach-at91/board-usb-a926x.c:26:0: include/linux/mm.h: In function 'is_vmalloc_addr': include/linux/mm.h:305:41: error: 'AT91_VIRT_BASE' undeclared (first use in this function) include/linux/mm.h:305:41: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-11-09ARM: at91: usart: drop static map regs for dbguJean-Christophe PLAGNIOL-VILLARD
In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-20 00:32:11 +0000