summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-03-07Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410 ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410 ARM: S3C64XX: Reduce output of s3c64xx_dma_init1() ARM: S3C64XX: Tone down SDHCI debugging ARM: S3C64XX: Add clock for i2c1 ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices ARM: S3C64XX: Fix keypad setup to configure correct number of rows ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02 ARM: S5P64X0: Fix number of GPIO lines in Bank F ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02
2011-03-07Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: davinci: cpufreq: fix section mismatch warning DaVinci: fix compilation warnings in <mach/clkdev.h> davinci: tnetv107x: fix register indexing for GPIOs numbers > 31 davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio ARM: pxa/tosa: register wm9712 codec device ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100 ARM: 6761/1: Update number of VIC for S5PV210 ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request ARM: 6765/1: remove obsolete comment from asm/mach/arch.h ARM: 6757/1: fix tlb.h induced linux/swap.h build failure
2011-03-07Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: mailbox: resolve hang issue OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver arm: mach-omap2: smartreflex: fix another memory leak
2011-03-04Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: mackerel: modify LCDC clock divider value ARM: mach-shmobile: ap4evb: modify LCDC clock divider value ARM: mach-shmobile: mackerel: fixup memory initialize for zboot ARM: mach-shmobile: ap4evb: fixup memory initialize for zboot ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocks ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fix
2011-03-04ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410Mark Brown
The debugfs support added to the regulator API (which has been merged in during this merge window) creates directories for regulators named after the display names for the regulators so replace / as a separator for multiple supplies with + in the SMDK6410 machine. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410Mark Brown
Avoid relying on implicit inclusion of machine.h Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()Ben Dooks
Reduce the logging output of s3c64xx_dma_init1() as it is not useful for normal bootup (and we get an overall indication of the registration of the PL180 DMA block). This removes the following output from the log: s3c64xx_dma_init1: registering DMA 0 (e0808100) s3c64xx_dma_init1: registering DMA 1 (e0808120) s3c64xx_dma_init1: registering DMA 2 (e0808140) s3c64xx_dma_init1: registering DMA 3 (e0808160) s3c64xx_dma_init1: registering DMA 4 (e0808180) s3c64xx_dma_init1: registering DMA 5 (e08081a0) s3c64xx_dma_init1: registering DMA 6 (e08081c0) s3c64xx_dma_init1: registering DMA 7 (e08081e0) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Tone down SDHCI debuggingMark Brown
The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing the log message in there at KERN_INFO to be displayed a lot which is slow and overly chatty. Convert the message into a pr_debug() to tone this down. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Add clock for i2c1Ben Dooks
The clock for i2c1 has been missing for a while, add it to the list of clocks for the system and ensure it is initialised at startup. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Staticise non-exported GPIO to interrupt functionsMark Brown
No need to put these in the global namespace and sparse gets upset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devicesMark Brown
Ensures that the declaration agrees with the definition and makes sparse happy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix keypad setup to configure correct number of rowsBen Dooks
The call to s3c_gpio_cfgrange_nopull() takes a size and base but this looks like it is trying to do base and end. This means it is configuring too many GPIOs and on the case of the Cragganmore means we're seeing an overflow of the ROW pins causing problems with the keyboard driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02Lars-Peter Clausen
The gta02 header file still uses the old S3C2410_GPJx defines instead of the S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed this causes the following build failure: sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk': sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk': sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event': sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: At top level: sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function) sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function) This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g on the file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S5P64X0: Fix number of GPIO lines in Bank FBanajit Goswami
This patch modifies the number of total GPIO lines for Bank F for Samsung S5P6440 and S5P6450 SoCs from 2 to 16. This is necessary as the GPIO lines from 0 to 13 are reserved and only lines 14 and 15 are used. As during initialization, the line number starts at 0, putting 2 does not solve the intended purpose. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02Lars-Peter Clausen
The gta02 mach file references the ohci device. So we need to select S3C_DEV_USB_HOST to have the device available. This fixes the following linker errors: arch/arm/mach-s3c2440/built-in.o: In function 'gta02_machine_init': mach-gta02.c:(.init.text+0x370): undefined reference to 's3c_ohci_set_platdata' arch/arm/mach-s3c2440/built-in.o:(.init.data+0xac): undefined reference to 's3c_device_ohci' Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: mach-shmobile: mackerel: modify LCDC clock divider valueKuninori Morimoto
mackerel WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04ARM: mach-shmobile: ap4evb: modify LCDC clock divider valueKuninori Morimoto
ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-03Merge branch 'for_2.6.38/pm-fixes' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes
2011-03-03omap: mailbox: resolve hang issueHari Kanigeri
omap4 interrupt disable bits is different. On rx kfifo full, the mbox rx interrupts wasn't getting disabled, and this is causing the rcm stress tests to hang. Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Armando Uribe <x0095078@ti.com> Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-02OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driverShweta Gulati
This Patch frees all the dynamically allocated memory which couldn't have been released in some error hitting cases. Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-02arm: mach-omap2: smartreflex: fix another memory leakAaro Koskinen
Temporary strings with volt_* file names should be released after the debugfs entries are created. While at it, also simplify the string allocation, and use just snprintf() to create the name. The patch eliminates kmemleak reports with the following stack trace (multiple objects depending on HW): unreferenced object 0xcedbc5a0 (size 64): comm "swapper", pid 1, jiffies 4294929375 (age 423.734s) hex dump (first 32 bytes): 76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00 volt_975000..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c012fee0>] create_object+0x104/0x208 [<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c [<c0013f64>] omap_sr_probe+0x314/0x420 [<c02a1724>] platform_drv_probe+0x18/0x1c [<c02a088c>] driver_probe_device+0xc8/0x188 [<c02a09b4>] __driver_attach+0x68/0x8c [<c02a00ac>] bus_for_each_dev+0x44/0x74 [<c029f9e0>] bus_add_driver+0xa0/0x228 [<c02a0cac>] driver_register+0xa8/0x130 [<c02a1b2c>] platform_driver_probe+0x18/0x8c [<c0013c1c>] sr_init+0x40/0x74 [<c005a554>] do_one_initcall+0xc8/0x1a0 [<c00084f4>] kernel_init+0x150/0x218 [<c0065d64>] kernel_thread_exit+0x0/0x8 [<ffffffff>] 0xffffffff Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-01Merge branch 'davinci-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into fixes
2011-02-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap4: prcm: Fix the CPUx clockdomain offsets OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL OMAP2+: mailbox: fix lookups for multiple mailboxes OMAP2420: mailbox: fix IVA vs DSP IRQ numbering mach-omap2: smartreflex: world-writable debugfs voltage files mach-omap2: pm: world-writable debugfs timer files mach-omap2: mux: world-writable debugfs files
2011-02-28davinci: cpufreq: fix section mismatch warningAxel Lin
Fix below section mismatch warning: WARNING: vmlinux.o(.data+0x673c): Section mismatch in reference from the variable davinci_driver to the function .init.text:davinci_cpu_init() The variable davinci_driver references the function __init davinci_cpu_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28DaVinci: fix compilation warnings in <mach/clkdev.h>Sergei Shtylyov
Commit 6d803ba736abb5e122dede70a4720e4843dd6df4 (ARM: 6483/1: arm & sh: factorised duplicated clkdev.c) caused the following warnings: In file included from /home/headless/src/kernel.org/linux-davinci/arch/arm/ include/asm/clkdev.h:17, from include/linux/clkdev.h:15, from arch/arm/mach-davinci/clock.h:71, from arch/arm/mach-davinci/common.c:22: arch/arm/mach-davinci/include/mach/clkdev.h:4: warning: `struct clk' declared inside parameter list arch/arm/mach-davinci/include/mach/clkdev.h:4: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-davinci/include/mach/clkdev.h:9: warning: `struct clk' declared inside parameter list Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28davinci: tnetv107x: fix register indexing for GPIOs numbers > 31Hirosh Dabui
This patch fix a bug in the register indexing for GPIOs numbers > 31 to get the relevant hardware registers of tnetv107x to control the GPIOs. In the structure tnetv107x_gpio_regs: struct tnetv107x_gpio_regs { u32 idver; u32 data_in[3]; u32 data_out[3]; u32 direction[3]; u32 enable[3]; }; The GPIO hardware register addresses of tnetv107x are stored. The chip implements 3 registers of each entity to serve 96 GPIOs, each register provides a subset of 32 GPIOs. The driver provides these macros: gpio_reg_set_bit, gpio_reg_get_bit and gpio_reg_clear_bit. The bug implied the use of macros to access the relevant hardware register e.g. the driver code used the macro like this: 'gpio_reg_clear_bit(&reg->data_out, gpio)' But it has to be used like this: 'gpio_reg_clear_bit(reg->data_out, gpio)'. The different results are shown here: - &reg->data_out + 1 (it will add the full array size of data_out i.e. 12 bytes) - reg->data_out + 1 (it will increment only the size of data_out i.e. only 4 bytes) Acked-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Hirosh Dabui <hirosh.dabui@snom.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audioRajashekhara, Sudhakar
After the multi-component commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support) for ASoC, we need to register the platform device for davinci-pcm-audio. This patch and patch at [1] are required for audio to work on DA850/OMAP-L138. [1] https://patchwork.kernel.org/patch/495211/ Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-27Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-02-27ARM: pxa/tosa: register wm9712 codec deviceDmitry Eremin-Solenikov
Since f0fba2ad1b it's required to register platform devices even for AC'97 codecs. Register one on tosa (wm9712-codec). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-27ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platformDmitry Eremin-Solenikov
pxa25x platforms were left out of major ASoC Update patch. Since f0fba2ad1b a registration of pxa-pcm-audio device is required for ASoC to function on pxa platforms. Register one also for pxa210/pxa25x. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-27ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported nowDmitry Eremin-Solenikov
Since 2e48928d8a0f38c1b5c81eb3f1294de8a6382c68 it's no longer possible to set the name of the LED trigger for RFKILL events. Drop respective code from tosa-bt.c Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-26ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100Kukjin Kim
The S5P6442 and S5PC100 SoCs have 4 VICs. However, default VIC number is defined 2 in arch/arm/common. So can be happened some problem on it. Basically, it requires for suspend and resume. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-26ARM: 6761/1: Update number of VIC for S5PV210Kukjin Kim
The S5PV210 SoC have 4 VICs. It requires for suspend and resume. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-26ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 coresWill Deacon
ARMv7 allows the debug core logic to be powered down and provides the DBGPRSR register so that software can power-up and check the status of the logic. This patch ensures that the debug logic is powered up on ARMv7 cores before we attempt to access the extended debug registers. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-26ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS requestWill Deacon
The GETHBPREGS ptrace request incorrectly maps its index argument onto the thread's saved debug state when the index != 0. This has not yet been seen from userspace because GDB (the only user of this request) only reads from register 0. This patch fixes the indexing. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-26ARM: 6765/1: remove obsolete comment from asm/mach/arch.hNicolas Pitre
Since commit 6fc31d54 this comment is no longer true. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-25Merge branch 'patches_for_2.6.38rc' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
devel-fixes
2011-02-25omap4: prcm: Fix the CPUx clockdomain offsetsSantosh Shilimkar
CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base. The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power domain control register Fix the same. The autogen scripts is fixed thanks to Benoit Cousson With the old value, the clockdomain code would access the *_PWRSTCTRL.POWERSTATE field when it thought it was accessing the *_CLKSTCTRL.CLKTRCTRL field. In the worst case, this could cause system power management to behave incorrectly. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-24OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMERPaul Walmsley
OMAP2+ kernels built without CONFIG_OMAP_32K_TIMER crash on boot after the 2.6.38 sched_clock changes: [ 0.000000] OMAP clockevent source: GPTIMER1 at 13000000 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (2.6.38-rc5-00057-g04aa67d #152) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c Without CONFIG_OMAP_32K_TIMER, the kernel has an clockevent and clocksource resolution about three orders of magnitude higher than with CONFIG_OMAP_32K_TIMER set. The tradeoff is that the lowest power consumption states are not available. Fix by calling init_sched_clock() from the GPTIMER clocksource init code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: serio/gameport - use 'long' system workqueue Input: synaptics - document 0x0c query Input: tegra-kbc - add function keymap
2011-02-23ARM: 6757/1: fix tlb.h induced linux/swap.h build failureUwe Kleine-König
Commit 06824ba (ARM: tlb: delay page freeing for SMP and ARMv7 CPUs) introduced a build failure for builds with CONFIG_SWAP=n: In file included from arch/arm/mm/init.c:27: arch/arm/include/asm/tlb.h: In function 'tlb_flush_mmu': arch/arm/include/asm/tlb.h:101: error: implicit declaration of function 'release_pages' arch/arm/include/asm/tlb.h: In function 'tlb_remove_page': arch/arm/include/asm/tlb.h:165: error: implicit declaration of function 'page_cache_release' as linux/swap.h doesn't include linux/pagemap.h but actually needs it (see comments in linux/swap.h as to why this is.) Fix that by #including <linux/pagemap.h> in <asm/pgalloc.h> as it's done by x86. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-22OMAP2/3: clock: fix fint calculation for DPLL_FREQSELJohn Ogness
In OMAP35X TRM Rev 2010-05 Figure 7-18 "DPLL With EMI Reduction Feature", it is shown that the internal frequency is calculated by CLK_IN/(N+1). However, the value passed to _dpll_test_fint() is already "N+1" since Linux is using the values to divide by. In the technical reference manual, "N" is referring to the divider's register value (0-127). During power management testing, it was observed that programming the wrong jitter correction value can cause the system to become unstable and eventually crash. Signed-off-by: John Ogness <john.ogness@linutronix.de> [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-21Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: Fix regulator names ARM: S5PV210: Update max8998_platform_data ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata ARM: S5P: Fix end address in memory resource information for UART devices ARM: S5P64X0: Cleanup map.h file ARM: S5P6442: Cleanup map.h file ARM: S5PC100: Clenaup map.h file ARM: S5PV210: Cleanup map.h file ARM: S5PV310: Cleanup map.h file
2011-02-21ARM: 6745/1: kprobes insn decoding fixNicolas Pitre
Marcin Slusarz says: > In arch/arm/kernel/kprobes-decode.c there's a function > arm_kprobe_decode_insn which does: > > } else if ((insn & 0x0e000000) == 0x0c400000) { > ... > > This is always false, so code below is dead. > I found this bug by coccinelle (http://coccinelle.lip6.fr/). Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: tlb: move noMMU tlb_flush() to asm/tlb.hRussell King
There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's part of the tlb shootdown interface. Move it to asm/tlb.h instead, as per x86. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: tlb: delay page freeing for SMP and ARMv7 CPUsRussell King
We need to delay freeing any mapped page on SMP and ARMv7 systems to ensure that the data is not accessed by other CPUs, or is used for speculative prefetch with ARMv7. This includes not only mapped pages but also pages used for the page tables themselves. This avoids races with the MMU/other CPUs accessing pages after they've been freed but before we've invalidated the TLB. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: Keep exit text/data around for SMP_ON_UPRussell King
When SMP_ON_UP is used and the spinlocks are inlined, we end up with inline spinlocks in the exit code, with references from the SMP alternatives section to the exit sections. This causes link time errors. Avoid this by placing the exit sections in the init-discarded region. Cc: <stable@kernel.org> Tested-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: Ensure predictable endian state on signal handler entryRussell King
Ensure a predictable endian state when entering signal handlers. This avoids programs which use SETEND to momentarily switch their endian state from having their signal handlers entered with an unpredictable endian state. Cc: <stable@kernel.org> Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6740/1: Place correctly notes section in the linker scriptPawel Moll
Commit 18991197b4b588255ccabf472ebc84db7b66a19c added --build-id linker option when toolchain supports it. ARM one does, but for some reason places the section at 0 when linker script doesn't mention it explicitly. The 1e621a8e3752367d4aae78a8ab00a18fb2793f34 worked around the problem removing this section from binary image with explicit objcopy options, but it still exists in vmlinux, confusing tools like debuggers and perf. This problem was discussed here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html but the proposed changes to the linker script were substantial. This patch simply places NOTES (36 bytes long, at least when compiled with CodeSourcery toolchain) between data and bss, which seem to be the right place (and suggested by the sample linker script in include/asm-generic/vmlinux.lds.h). It is enough to place it correctly in vmlinux (so debuggers are happy): Section Headers: [11] .data PROGBITS c07ce000 7ce000 020fc0 00 WA 0 0 32 [12] .notes NOTE c07eefc0 7eefc0 000024 00 AX 0 0 4 [13] .bss NOBITS c07ef000 7eefe4 01e628 00 WA 0 0 32 Program Headers: LOAD 0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000 NOTE 0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4 Section to Segment mapping: Segment Sections... 00 <...> .data .notes .bss 01 .notes and to get it exposed as /sys/kernel/notes used by perf tools. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6700/1: SPEAr: Correct SOC config base address for spear320viresh kumar
SPEAR320_SOC_CONFIG_BASE was wrong, causing the wrong registers to be accessed. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 18:23:25 +0000